Author Topic: FYI: SCSC Ming 2009 Date Change (Read 2509 times)

76 Bonneville · « **Reply #25 on:** September 01, 2009, 09:40:42 PM »

I'm laughing already. I think you should dance around the pits handing out lucky charms.

Bull20 · « **Reply #26 on:** September 01, 2009, 09:43:40 PM »

That is the Irish, scots dance around the swords of the losers.

76 Bonneville · « **Reply #27 on:** September 01, 2009, 09:50:17 PM »

Quote from: Bull20 on September 01, 2009, 09:43:40 PM

That is the Irish, scots dance around the swords of the losers.

If we bring our swords, will we get a dance outta ya

Bull20 · « **Reply #28 on:** September 01, 2009, 09:54:50 PM »

Better yet, you bring the saki and I will bring the scotch - we are going to have fun

76 Bonneville · « **Reply #29 on:** September 01, 2009, 10:09:11 PM »

Quote from: Bull20 on September 01, 2009, 09:54:50 PM

Better yet, you bring the saki and I will bring the scotch - we are going to have fun

Sounds good, Bull. Is your boat ready.

The only things I have to do is change the oil and adjust the carb (Burley was at 4200' elevation).

Things I may do

1) Picked up an oil cooler. May plumb that in, oil has been running 250-260 degrees
2) Harold Bruce got me another fin, but I have to cut an access hole in my floor to get to the bottom. The fin thats in it now is to far back and the boat pushes in the corners.
3)I may send my shoe up to Harold to have him back cut it and maybe loosen the boat up a little.

Bull20 · « **Reply #30 on:** September 01, 2009, 10:24:16 PM »

I run the water to the cooler first - about 230. 180 water. The fin thing is new to me, I think it is set right. Instaling a new tach, but other than that ready to go. Have tools ready to help at Ming.

Bull20 · « **Reply #31 on:** September 03, 2009, 03:13:13 PM »

Hey 76 - Did you get your oil cooler in?

76 Bonneville · « **Reply #32 on:** September 03, 2009, 03:22:08 PM »

Probably wont work on the boat until sunday when it cools off. It's a 102* out on the patio right now. Besides it been a tough day already. My son and I just got back from surfing at Carlsbad, I need a nap.

76 Bonneville · « **Reply #33 on:** September 03, 2009, 03:29:40 PM »

Hey Bull, are you running those Hooker dry headers.

Bull20 · « **Reply #34 on:** September 03, 2009, 05:05:49 PM »

Yes indeed, they look and work great. Set back and relax, surfing is hard work; in my day the boards floated you - but no leashes.

76 Bonneville · « **Reply #35 on:** September 03, 2009, 05:13:01 PM »

Quote from: Bull20 on September 03, 2009, 05:05:49 PM

Yes indeed, they look and work great. Set back and relax, surfing is hard work; in my day the boards floated you - but no leashes.

I just gave my 1964 10' Bing Board to my niece last week.
Do you run a cooler on your boat. If so does yours mount to the stringer or block. Mine is suppose to mount to the block, but seems like you'd have problems with the oil filter.

Bull20 · « **Reply #36 on:** September 03, 2009, 07:26:45 PM »

ah-once again idefeat you; I have a 1960 Bragg. Mine mounts ok the block, foward of the filter. Lots of hose and some brackets and your in.

Bull20 · « **Reply #37 on:** September 08, 2009, 10:54:58 AM »

Ross reports that we may be in danger of loosing Ming, due to low boat count, but he said that he is working on it. Keep your finger crossed!

76 Bonneville · « **Reply #38 on:** September 08, 2009, 11:32:41 AM »

Bull, did you talk to Ross or fead it on the boards somewhere?

Sounds like we have plenty of comp jets, who's not showing up?

Brad @ SCJB · « **Reply #39 on:** September 08, 2009, 11:41:41 AM »

its the same ol song and dance every year.

additionally, lack of planning because theres conflicting dates. The san diego bay fair is the weekend before that the majority of all the other classes are attending, plus theres some kilo's a week or two after....and theres some other memorial race somewhere else i heard about.

wish some of these boat racing org's would pull their head out of their ass and work together on spacing stuff out....including events with the NJBA.

Bull20 · « **Reply #40 on:** September 08, 2009, 12:12:24 PM »

Ross information via Email - as of today. I asked about the the race and he responded.

76 Bonneville · « **Reply #41 on:** September 08, 2009, 12:55:41 PM »

Thanks Bull, now I dont feel so bad about not working on the boat this weekend.

Bull20 · « **Reply #42 on:** September 08, 2009, 01:04:23 PM »

Don't give up yet - Ross is still working on it. I did but the tach in mine and mount the GPS mount, but that's about it.

76 Bonneville · « **Reply #43 on:** September 08, 2009, 01:14:41 PM »

I did mount the oil cooler on another block in my garage for mock up. Seams like it will clear the rail kit but now where to put the remote oil filter.

Bull20 · « **Reply #44 on:** September 08, 2009, 01:51:41 PM »

I use the stock filter mount on the block and plumb in the cooler lines off the byepass ports.

Bull20 · « **Reply #45 on:** September 08, 2009, 03:35:25 PM »

The race is officialy canceled - POOP!

76 Bonneville · « **Reply #46 on:** September 08, 2009, 07:39:00 PM »

So that means this year is done.
Start planning for the 2010 season opener at the Blue Water over Thanksgiving.

Ralph Brunt · « **Reply #47 on:** September 08, 2009, 07:43:52 PM »

Quote from: 76 Bonneville on September 08, 2009, 07:39:00 PM

So that means this year is done.
Start planning for the 2010 season opener at the Blue Water over Thanksgiving.

hmmmm, wonder if i could get my motor done in time $:-\$

Luckie Stiff · « **Reply #48 on:** September 08, 2009, 08:13:40 PM »

Quote from: Ralph Brunt on September 08, 2009, 07:43:52 PM

hmmmm, wonder if i could get my motor done in time $:-\$

You can do it man, If I can help at all, let me know.