February 10, 2012, 10:43:19 PMLatest Member: JEThro


Author Topic: Inboard Endurance rule change effective immediately  (Read 465 times)

Brad @ SCJB

  • Administrator
  • Informative Member
  • *******
  • Posts: 8,861
  • Liked: 14
  • Karma: +31/-0
  • HNIC
    • View Profile
    • SoCal Jet Boats.com
Inboard Endurance rule change effective immediately
« on: June 16, 2010, 05:20:57 AM »
Tuesday, June 15, 2010
Effective immediately, we have changed the wording on Rule # 1 in Comp Jets, page 91 of the 2010 Inboard Rule Book

SHOULD BE CHANGED TO READ:

APBA COMPETITION JET DIVISION

1. Any hull with a maximum length of 24 feet, including pump and extension, is allowed. All boats must be equipped with two (2) stringers and must be one (1) piece from transom to the bulkhead that is in front of the driver, and have engine mounted to them. Stringers must be visible for inspection. The driver’s seat and or frame of seat must be through-bolted to at least one (1) stringer. NO LAG BOLTS ALLOWED.

The IE Commission has approved this rule change.

—Ted Kolby, Inboard Endurance Chairman

The APBA Safety and Rescue Committee fully supports this action by the Inboard Endurance Commission.

—Mike Weber, Chairman

APBA Safety and Rescue Committee
  • Boat #1: 1978 Liberty
  • Boat #2: 1978 Southwind 20' Cruiser

              Now Live! www.CompJetRacing.com

 


Powered by EzPortal
anything
anything