Author Topic: TX 19 youngblood (Read 22225 times)

BOOST · « **on:** September 11, 2009, 03:45:25 PM »

swapped out the twisties for some for some shorties and new scoop,now the season coming to an end going to re rig the boat new valve covers ceramic coat the headers re-plum the hoses. sh't should of put this under projects.

2savage4you · « **Reply #1 on:** September 11, 2009, 05:33:14 PM »

Boats are like women...

you can work on them in the winter and summer and they still require more attention....

Bitches

Boat still looks good bro

BOOST · « **Reply #2 on:** September 12, 2009, 05:53:32 PM »

This is getting old yeah right

Ralph Brunt · « **Reply #3 on:** September 12, 2009, 06:11:08 PM »

you crazy foo,

what you gunna do

put a ford in so you can go faster

if'n you need i gots a 60ish familly boat motor ya'll can borrow

Luckie Stiff · « **Reply #4 on:** September 12, 2009, 06:15:46 PM »

Quote from: boost on September 12, 2009, 05:53:32 PM

This is getting old yeah right

Brian, dude somebody stole your motor!

hahaha, what are you doing there boss?

BOOST · « **Reply #5 on:** September 12, 2009, 06:31:53 PM »

Quote from: Ralph Brunt on September 12, 2009, 06:11:08 PM

you crazy foo,
what you gunna do put a ford in so you can go faster if'n you need i gots a 60ish familly boat motor ya'll can borrow

Skip RALPH going to go through the boat get rid of a lot of B/S rubber hose and going to move the motor back Skip i need a hook up on the seats? re plum the fuel lines it had one fuel line going to both carbs

so basically only one side of the regulator was being use

BOOST · « **Reply #6 on:** September 12, 2009, 06:41:47 PM »

Any feed back on XRP Teflon hoses I got my eye on the HS-79 which is a black nylon outter and teflon enter. www.xrp.com.

Ralph Brunt · « **Reply #7 on:** September 12, 2009, 06:44:16 PM »

i know you will do it proud Boost

i got all my shit from superdave at sweet performance

i got the blue hose (think it comes in black too) for my liberty and it was way cheaper than braided.

Luckie Stiff · « **Reply #8 on:** September 12, 2009, 08:47:10 PM »

Quote from: boost on September 12, 2009, 06:41:47 PM

Any feed back on XRP Teflon hoses I got my eye on the HS-79 which is a black nylon outter and teflon enter. www.xrp.com.

I really like the look of that stuff, especially with the polished nickel fittings, that would look so freakin' good on your boat. What's the price like? Whenever you're ready for seats, just let me know and we'll get them rolling. glad to hear you're moving the engine back too!

Factory502 · « **Reply #9 on:** September 14, 2009, 05:37:59 PM »

HEy Brian- Nice headers

- hey that XRP stuff is killer- a good friend just finished his 21 Schiada River cruzer with it and that stuff is the deal- a little pricey but well worth it boat is looking killer-

Later

Just Electric · « **Reply #10 on:** September 14, 2009, 09:55:01 PM »

nice start im thinken of getting rid of the elim sprint and going the gullwing route myself

BOOST · « **Reply #11 on:** September 15, 2009, 04:25:57 PM »

Here's a pic of the old ugly base plates the butterfly linkage sucks cant run the throttle cable from the back, fuk I'm picky plus the new ones right below look a lot better.I never ran a pair of Holley 660 carbs before whats the draw back or is there any on running the fuel lines to both carbs off one side of the regulator?

OUTLAW · « **Reply #12 on:** September 15, 2009, 08:34:28 PM »

O My What the Heck are you doing to your boat Son, it's all in pieces.... º@•#&#@*@$#╩╞¥... What ever your doing it's going to look good. !!

Nordie · « **Reply #13 on:** September 15, 2009, 08:38:15 PM »

its getting boostified! supa fly slam bam boom pow!

BOOST · « **Reply #14 on:** September 28, 2009, 06:56:51 PM »

Some more progress before and after

76NORDIC · « **Reply #15 on:** September 28, 2009, 07:05:55 PM »

Lookining good Brian, you are making some good headway there

MADSKILLZ · « **Reply #16 on:** September 28, 2009, 08:24:15 PM »

Looks alot better now bro!

BOOST · « **Reply #17 on:** October 16, 2009, 11:00:12 PM »

More progress Milled off the air horns converted them from 4160 to 4150 by adding metering blocks to the secondary now I can get a little more tune out of them.

I'm going to run these carbs for now them going to try a pair of 750 Quickfuel.

Willow Wog · « **Reply #18 on:** October 17, 2009, 10:54:12 AM »

How are those quickfuel carbs I have one that I wanna try but a little sketched out but I do need to 86 this edelbrock

BOOST · « **Reply #19 on:** October 17, 2009, 11:13:15 AM »

Quote from: willowog on October 17, 2009, 10:54:12 AM

How are those quickfuel carbs I have one that I wanna try but a little sketched out but I do need to 86 this edelbrock

Quickfuel is the way to go billet base plates and metering blocks three times lighter then other carbs more tuning ability and they look great,But I think a Holley tuned right will work just as good.

n8dawg · « **Reply #20 on:** October 19, 2009, 08:10:02 PM »

Im jealous! I want to start tearing mine down but i keep having to much fun driving it.
Looks great dude!

BOOST · « **Reply #21 on:** October 24, 2009, 11:26:01 AM »

Pick up my Quickfuel today A pair of 750 Dave at fuel curve is dialing them in

Nick · « **Reply #22 on:** October 24, 2009, 01:05:11 PM »

Nice Brian! I guess I'll see your new boat at the Tom Papp event in January.

n8dawg · « **Reply #23 on:** October 24, 2009, 04:50:25 PM »

Quote from: Nick on October 24, 2009, 01:05:11 PM

Nice Brian! I guess I'll see your new boat at the Tom Papp event in January.

X2 and Im riding with you dude!

BOOST · « **Reply #24 on:** November 20, 2009, 08:09:59 AM »

Just got in my rails and my valve covers from the powder coating.