SOLD 1978 Eliminator Daytona 19

  • 42 Replies
  • 10487 Views

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« on: May 18, 2015, 03:05:40 PM »
Hull is stripped bare light/medium layup ,Factory capped straight good lines no hooks or anything weird.has light cosmetic damage on right front sponson not through the glass,Sits on a Competitive tandem trailer with longer tongue. This will make a great river boat or turn it into a single seater any questions call,  leave message .      San Diego area
  $ 4k Titles in hand.
« Last Edit: May 29, 2015, 12:28:04 PM by leadslinger »
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne



81sprint

  • Join Date: Nov 2012
  • Location: Vegas
  • *
  • Hero Member
  • *****
  • Posts: 640
  • Karma: +18/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #1 on: May 18, 2015, 06:16:34 PM »
Dammit I want this!

philofab

  • Join Date: Jun 2009
  • Location: Fort Mohave, AZ
  • *
  • Sr. Member
  • ****
  • Posts: 253
  • Karma: +1/-0
  • Excellence in Flatulence
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #2 on: May 18, 2015, 06:27:59 PM »
You aren't the only one. I want a pickfork sooo bad even though everyone says a gullwing is a better hot rod river boat.

mobboss

  • Join Date: Jun 2011
  • Location: elkins AR
  • *
  • Hero Member
  • *****
  • Posts: 1,323
  • Karma: +15/-0
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #3 on: May 18, 2015, 06:54:54 PM »
You can add me to that list !!! I have always wanted a pickle fork!!!


Sent from my iPhone using SoCalJetBoats
  • Boat #1: boat less

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« Reply #4 on: May 18, 2015, 07:28:32 PM »

another pic
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne

mobboss

  • Join Date: Jun 2011
  • Location: elkins AR
  • *
  • Hero Member
  • *****
  • Posts: 1,323
  • Karma: +15/-0
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #5 on: May 18, 2015, 07:44:27 PM »

You aren't the only one. I want a pickfork sooo bad even though everyone says a gullwing is a better hot rod river boat.
i never thought they were better! The southwind tunnel for the river! But for that just in your face badass look pickle fork is it!!


Sent from my iPhone using SoCalJetBoats
  • Boat #1: boat less

AnthonyH3

  • Join Date: Oct 2014
  • *
  • Full Member
  • ***
  • Posts: 186
  • Karma: +1/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #6 on: May 18, 2015, 08:07:32 PM »
Went out there on Sunday and look at this boat and was very interestedOne thing that held me back was the damage to the sponson what do you guys think of the damage in the picture???????


Sent from my iPhone using SoCal Jet Boats

mobboss

  • Join Date: Jun 2011
  • Location: elkins AR
  • *
  • Hero Member
  • *****
  • Posts: 1,323
  • Karma: +15/-0
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #7 on: May 18, 2015, 08:21:57 PM »
Yah that could be a little interesting, looks like a little water damage and delamination .


Sent from my iPhone using SoCalJetBoats
  • Boat #1: boat less

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« Reply #8 on: May 18, 2015, 08:35:53 PM »
Went out there on Sunday and look at this boat and was very interestedOne thing that held me back was the damage to the sponson what do you guys think of the damage in the picture???????


Sent from my iPhone using SoCal Jet Boats
The only thing that held you back was that I'm firm at 4k and you kept trying to Low ball me,,,, Like I told you this is not the boat for you so move on . Absolutely no water damage nor delame previous owner put glass over the gouge and left it rough.
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne

B.CR33CH

  • Join Date: May 2015
  • Location: riverside, ca
  • *
  • Sr. Member
  • ****
  • Posts: 470
  • Karma: +7/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #9 on: May 18, 2015, 08:42:24 PM »
I feel like 4k is very reasonable, sure needs work but you have to see the big picture. Pay 7-9 for one that doesn't need work.


Sent from my iPhone using SoCal Jet Boats

B.CR33CH

  • Join Date: May 2015
  • Location: riverside, ca
  • *
  • Sr. Member
  • ****
  • Posts: 470
  • Karma: +7/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #10 on: May 18, 2015, 08:46:44 PM »
He might sell for 3750 without the trailer 😂


Sent from my iPhone using SoCal Jet Boats

AnthonyH3

  • Join Date: Oct 2014
  • *
  • Full Member
  • ***
  • Posts: 186
  • Karma: +1/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #11 on: May 18, 2015, 08:49:53 PM »

I feel like 4k is very reasonable, sure needs work but you have to see the big picture. Pay 7-9 for one that doesn't need work.


Sent from my iPhone using SoCal Jet Boats


Sent from my iPhone using SoCal Jet Boats

AnthonyH3

  • Join Date: Oct 2014
  • *
  • Full Member
  • ***
  • Posts: 186
  • Karma: +1/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #12 on: May 18, 2015, 08:50:46 PM »

He might sell for 3750 without the trailer 😂
Have you even seen what this thing looks like in person to say you think it's worth the four grand

Sent from my iPhone using SoCal Jet Boats


Sent from my iPhone using SoCal Jet Boats

jyeager

  • Join Date: Feb 2011
  • Location: West Covina
  • *
  • Member
  • Macho Member
  • ******
  • Posts: 2,003
  • Karma: +62/-0
    • View Profile
  • Liked:
  • Likes Given: 241
« Reply #13 on: May 18, 2015, 08:57:11 PM »

The only thing that held you back was that I'm firm at 4k and you kept trying to Low ball me,,,, Like I told you this is not the boat for you so move on . Absolutely no water damage nor delame previous owner put glass over the gouge and left it rough.
Flat keel or round keel?


Sent from my iPhone using SoCalJetBoats mobile app
  • Boat #1: Southwind Tunnel Dragster 19
  • Boat #2: DiMarco18 V-Bottom

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« Reply #14 on: May 18, 2015, 09:03:57 PM »
Flat keel or round keel?


Sent from my iPhone using SoCalJetBoats mobile app
Lets have Anthony reply to this he seen the boat so what is it flat or round keel ?
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne

B.CR33CH

  • Join Date: May 2015
  • Location: riverside, ca
  • *
  • Sr. Member
  • ****
  • Posts: 470
  • Karma: +7/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #15 on: May 18, 2015, 09:04:38 PM »


Sent from my iPhone using SoCal Jet Boats
no sir I have not but being that I've also never seen one sell for less than 4k, it's an eliminator daytona, obviously the owner knows how desirable they are. He's not in a hurry to sell so he wants top dollar for what he has, like he said this boat obviously isn't for you. And if it is then it's 4k don't be cheap trying to buy a hull that is one of the most sought after.


Sent from my iPhone using SoCal Jet Boats

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« Reply #16 on: May 18, 2015, 09:11:37 PM »
no sir I have not but being that I've also never seen one sell for less than 4k, it's an eliminator daytona, obviously the owner knows how desirable they are. He's not in a hurry to sell so he wants top dollar for what he has, like he said this boat obviously isn't for you. And if it is then it's 4k don't be cheap trying to buy a hull that is one of the most sought after.


Sent from my iPhone using SoCal Jet Boats
Thank you ,,,
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne

jyeager

  • Join Date: Feb 2011
  • Location: West Covina
  • *
  • Member
  • Macho Member
  • ******
  • Posts: 2,003
  • Karma: +62/-0
    • View Profile
  • Liked:
  • Likes Given: 241
« Reply #17 on: May 18, 2015, 09:13:45 PM »
I wouldn't worry about the damage or the flat keel. Boats worth what he is asking and then some. A brand new one with all the goodies will cost you 15 to 17 out the door. Personally I think it's a steal. 👍👍👍👍 good luck with the sale.


Sent from my iPhone using SoCalJetBoats mobile app
  • Boat #1: Southwind Tunnel Dragster 19
  • Boat #2: DiMarco18 V-Bottom

AnthonyH3

  • Join Date: Oct 2014
  • *
  • Full Member
  • ***
  • Posts: 186
  • Karma: +1/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #18 on: May 18, 2015, 09:14:02 PM »
Nobody's being cheap buddy I know the Daytona like the back of my hand that thing is worth three grand only do the math this is my 1988 21 Daytona I bought a complete running boat with a setback pump for $8000 and you're telling me that thing is worth four


Sent from my iPhone using SoCal Jet Boats

lifted250

  • Join Date: Sep 2014
  • *
  • Hero Member
  • *****
  • Posts: 719
  • Karma: +6/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #19 on: May 18, 2015, 09:23:26 PM »
That Daytona needs 3 k worth of work
Floors need to be flow coated it's really Worth. 2800 to 3200 u would be in that build fully restored 9 to 12 k


Sent from my iPhone using SoCal Jet Boats

jyeager

  • Join Date: Feb 2011
  • Location: West Covina
  • *
  • Member
  • Macho Member
  • ******
  • Posts: 2,003
  • Karma: +62/-0
    • View Profile
  • Liked:
  • Likes Given: 241
« Reply #20 on: May 18, 2015, 09:29:08 PM »

Nobody's being cheap buddy I know the Daytona like the back of my hand that thing is worth three grand only do the math this is my 1988 21 Daytona I bought a complete running boat with a setback pump for $8000 and you're telling me that thing is worth four


Sent from my iPhone using SoCal Jet Boats
If you got that 21 for 8 grand congrats. That thing looks beautiful, I've always loved green boats. With that being said, you try to find a daytona for Cheeper less everything.


Sent from my iPhone using SoCalJetBoats mobile app
  • Boat #1: Southwind Tunnel Dragster 19
  • Boat #2: DiMarco18 V-Bottom

jyeager

  • Join Date: Feb 2011
  • Location: West Covina
  • *
  • Member
  • Macho Member
  • ******
  • Posts: 2,003
  • Karma: +62/-0
    • View Profile
  • Liked:
  • Likes Given: 241
« Reply #21 on: May 18, 2015, 09:30:22 PM »

That Daytona needs 3 k worth of work
Floors need to be flow coated it's really Worth. 2800 to 3200 u would be in that build fully restored 9 to 12 k


Sent from my iPhone using SoCal Jet Boats
I've got 20 bucks says the gel will buff back out and so will the floors.


Sent from my iPhone using SoCalJetBoats mobile app
  • Boat #1: Southwind Tunnel Dragster 19
  • Boat #2: DiMarco18 V-Bottom

B.CR33CH

  • Join Date: May 2015
  • Location: riverside, ca
  • *
  • Sr. Member
  • ****
  • Posts: 470
  • Karma: +7/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #22 on: May 18, 2015, 09:43:15 PM »

Nobody's being cheap buddy I know the Daytona like the back of my hand that thing is worth three grand only do the math this is my 1988 21 Daytona I bought a complete running boat with a setback pump for $8000 and you're telling me that thing is worth four


Sent from my iPhone using SoCal Jet Boats
Did you buy your Daytona for the engine, pump or hull......hmm yeah I think that answers that. Try to find one for less then 4k, I'll be waiting. You want to know why it's 4k... Because he said it is. You have never heard of supply and demand have you. Supply low, demand high= higher price. It's simple don't buy it or don't be cheap and pay 4k. The boat has potential plain and simple. Lots of people like these boats and will pay the money because it will be gone before you know it. Good day sir.


Sent from my iPhone using SoCal Jet Boats

Beaveretriever

  • Join Date: May 2008
  • Location: Fullerton, Ca
  • *
  • SCJB Plus Member
  • Macho Member
  • ********
  • Posts: 2,752
  • Karma: +34/-0
    • View Profile
  • Liked:
  • Likes Given: 87
« Reply #23 on: May 18, 2015, 09:55:52 PM »
Being that I owned a very nice daytona that was featured in performance boats magazine with an injected bbc I feel like I should throw in my 2 cents

For $4k the boat looks ok. It's a clean stripped hull. There is no intake set and there are some things that may need to be fixed. I bought my hull for alot more and sold it for alot more. The boat is a great project boat. Pictures never do anything justice. When you show up and put your hands on it that's when you can tell. My personal opinion is that $4k is a little steep, however I can't buy the boat anyways so I am not looking. I know for a few more grand you can buy a really nice daytona that needs power and it's already clean with polished floors. You can buy daytonas  minus motors for 6 to 14 all day long. But we have all bought and sold boats before and you ALWAYS find stuff that needs to be fixed, ALWAYS.  I really think that all the guys giving this man shit for selling a hull should give him a break. Be curious and don't kill a sale. If he wanted 10k for the boat let him try. If you aren't buying the boat then don't fuck it up for someone else. GLWS. If I didn't buy a house, get engaged, planning a weddijg, got a new puppy, that boat would be in my drive way getting another injected bbc
  • Boat #1: 1981 Eliminator Daytona 19' Jet
  • Boat #2: 2003 22' Placecraft Deck boat

B.CR33CH

  • Join Date: May 2015
  • Location: riverside, ca
  • *
  • Sr. Member
  • ****
  • Posts: 470
  • Karma: +7/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #24 on: May 18, 2015, 10:03:06 PM »

Being that I owned a very nice daytona that was featured in performance boats magazine with an injected bbc I feel like I should throw in my 2 cents

For $4k the boat looks ok. It's a clean stripped hull. There is no intake set and there are some things that may need to be fixed. I bought my hull for alot more and sold it for alot more. The boat is a great project boat. Pictures never do anything justice. When you show up and put your hands on it that's when you can tell. My personal opinion is that $4k is a little steep, however I can't buy the boat anyways so I am not looking. I know for a few more grand you can buy a really nice daytona that needs power and it's already clean with polished floors. You can buy daytonas  minus motors for 6 to 14 all day long. But we have all bought and sold boats before and you ALWAYS find stuff that needs to be fixed, ALWAYS.  I really think that all the guys giving this man shit for selling a hull should give him a break. Be curious and don't kill a sale. If he wanted 10k for the boat let him try. If you aren't buying the boat then don't **** it up for someone else. GLWS. If I didn't buy a house, get engaged, planning a weddijg, got a new puppy, that boat would be in my drive way getting another injected bbc
exactly


Sent from my iPhone using SoCal Jet Boats

B.CR33CH

  • Join Date: May 2015
  • Location: riverside, ca
  • *
  • Sr. Member
  • ****
  • Posts: 470
  • Karma: +7/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #25 on: May 18, 2015, 10:08:06 PM »
I like the boat, good luck with the sale man!


Sent from my iPhone using SoCal Jet Boats

AnthonyH3

  • Join Date: Oct 2014
  • *
  • Full Member
  • ***
  • Posts: 186
  • Karma: +1/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #26 on: May 18, 2015, 10:09:21 PM »
 


Sent from my iPhone using SoCal Jet Boats

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« Reply #27 on: May 18, 2015, 10:10:13 PM »
Being that I owned a very nice daytona that was featured in performance boats magazine with an injected bbc I feel like I should throw in my 2 cents

For $4k the boat looks ok. It's a clean stripped hull. There is no intake set and there are some things that may need to be fixed. I bought my hull for alot more and sold it for alot more. The boat is a great project boat. Pictures never do anything justice. When you show up and put your hands on it that's when you can tell. My personal opinion is that $4k is a little steep, however I can't buy the boat anyways so I am not looking. I know for a few more grand you can buy a really nice daytona that needs power and it's already clean with polished floors. You can buy daytonas  minus motors for 6 to 14 all day long. But we have all bought and sold boats before and you ALWAYS find stuff that needs to be fixed, ALWAYS.  I really think that all the guys giving this man shit for selling a hull should give him a break. Be curious and don't kill a sale. If he wanted 10k for the boat let him try. If you aren't buying the boat then don't **** it up for someone else. GLWS. If I didn't buy a house, get engaged, planning a weddijg, got a new puppy, that boat would be in my drive way getting another injected bbc
I think the plan here was to start a problem to kill any sales so he could try his Lo Ball Tactics all over again. I'll say this in English and type real slow,,,, Im not lowering my price and this is not the boat for you so move on.what else can I say ,I can't speak any other language.
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne

AnthonyH3

  • Join Date: Oct 2014
  • *
  • Full Member
  • ***
  • Posts: 186
  • Karma: +1/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #28 on: May 18, 2015, 10:21:07 PM »
Lol... I simply asked a question to get the opinions of others. You're the one getting defensive and taking it the wrong way. No one was low balling you. I drove 2 hours there and back to see it and I would have to go back to pick it up because you didn't have paperwork. I asked you to take $200 off, not a lowball. Normally when you sell things you should expect a bit of negotiation. Anyways good luck on your sale!


Sent from my iPhone using SoCal Jet Boats

jetjunky101

  • Join Date: Aug 2011
  • Location: central cali
  • *
  • Hero Member
  • *****
  • Posts: 639
  • Karma: +5/-0
    • View Profile
  • Liked:
  • Likes Given: 11
« Reply #29 on: May 18, 2015, 11:04:35 PM »
A pissing match over what someone wants agin ... come on guys this isn't Craigslist .. this is....was ... a place I liked ...but now ...not so much ... If you want a Daytona break your ass off some cash and pay for it .plain and simple .

capogniracing

  • Join Date: Mar 2014
  • Location: Chino
  • *
  • Macho Member
  • ******
  • Posts: 2,480
  • Karma: +66/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #30 on: May 19, 2015, 05:13:35 AM »
Nice boat good price. I believe your paying for what you get here. There are some type of boats you just can't haggle a price. I wish I had time/money for a daytona project. This would be an awesome start. Good luck with sale bud!


"RTCP"

lifted250

  • Join Date: Sep 2014
  • *
  • Hero Member
  • *****
  • Posts: 719
  • Karma: +6/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #31 on: May 19, 2015, 06:18:56 AM »
Never said it wasn't  good float I said it needs some love


Sent from my iPhone using SoCal Jet Boats

capogniracing

  • Join Date: Mar 2014
  • Location: Chino
  • *
  • Macho Member
  • ******
  • Posts: 2,480
  • Karma: +66/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #32 on: May 19, 2015, 06:33:39 AM »
They all do unless there new lol, just ask Jimpen. Just need to remember your buying a hull that will hold value and actual has potential to be a go fast boat.


"RTCP"

Roadrunner

  • Join Date: Oct 2011
  • Location: socal
  • *
  • Hero Member
  • *****
  • Posts: 655
  • Karma: +12/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 19
« Reply #33 on: May 19, 2015, 06:35:10 AM »

A pissing match over what someone wants agin ... come on guys this isn't Craigslist .. this is....was ... a place I liked ...but now ...not so much ... If you want a Daytona break your ass off some cash and pay for it .plain and simple .




SCJB iPhone
In God we trust, all others pay cash.

jimpen

  • Join Date: May 2014
  • *
  • SCJB Plus Member
  • Macho Member
  • ********
  • Posts: 2,874
  • Karma: +68/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 69
« Reply #34 on: May 19, 2015, 07:47:26 AM »
Jimpen is staying out of this mess. Nice boat GLWS.


Sent from my iPhone using SoCal Jet Boats
  • Boat #1: 18 CP
  • Boat #2: Xcursion 23 RF

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« Reply #35 on: May 19, 2015, 07:53:07 AM »
Pics
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne

81sprint

  • Join Date: Nov 2012
  • Location: Vegas
  • *
  • Hero Member
  • *****
  • Posts: 640
  • Karma: +18/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #36 on: May 19, 2015, 08:18:23 AM »
If you want to buy a daytona for 4k bare hull or not you should expect that it will need some work. Good luck with the sale.

holorinhal

  • Join Date: Feb 2007
  • Location: Las Vegas,Nv
  • *
  • Sr. Member
  • ****
  • Posts: 258
  • Karma: +7/-0
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #37 on: May 19, 2015, 05:45:30 PM »
Hmmmmmm!!  ???
That sponson damage aint no thang!
never siad if it is a flat or round keel?
  • Boat #1: '86 Advantage 18
  • Boat #2: '81 Spectra 20

B.CR33CH

  • Join Date: May 2015
  • Location: riverside, ca
  • *
  • Sr. Member
  • ****
  • Posts: 470
  • Karma: +7/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 2
« Reply #38 on: May 19, 2015, 05:52:01 PM »
I want to buy it and call it ConTroVerSy


Sent from my iPhone using SoCal Jet Boats

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« Reply #39 on: May 19, 2015, 07:36:02 PM »
Flat keel ,Change that up when you reset the intake .
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne

Handi-Crack

  • Join Date: Mar 2014
  • Location: Newbury Park
  • *
  • Sr. Member
  • ****
  • Posts: 371
  • Karma: +3/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #40 on: May 19, 2015, 08:09:50 PM »
Never said it wasn't  good float I said it needs some love


Sent from my iPhone using SoCal Jet Boats

finish your boat before judging others. Got my 240 you owe me by the way?
  • Boat #1: 75 wriedt mavrick

lifted250

  • Join Date: Sep 2014
  • *
  • Hero Member
  • *****
  • Posts: 719
  • Karma: +6/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #41 on: May 20, 2015, 08:00:59 AM »
I am finishing mine with a new motor new pump new everything just takes time to do. It


Sent from my iPhone using SoCal Jet Boats

leadslinger

  • Join Date: May 2015
  • Location: Cajon 619
  • *
  • Full Member
  • ***
  • Posts: 174
  • Karma: +4/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 3
« Reply #42 on: May 27, 2015, 07:11:32 AM »
Bump,
  • Boat #1: 2016 Predator/Cheyenne
Slinging Lead on and off the water for over 40 YRS

82 18' Crusader Tunnel SOLD ,
00 23' Mako 232 fish killer,SOLD
78 19' Eliminator Daytona SOLD
16 19' Predator/Cheyenne

 


Website Security Test
Powered by EzPortal
anything
Website Security Test