Null


Taylor SJ

  • Karma: +6/-0
aluminum heads
« on: January 16, 2007, 07:14:30 PM »
anyone out there running aluminum Edelbrock heads in their boat? just curious. what kind of results?
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Ralph Brunt

  • Karma: +51/-0
Re: aluminum heads
« Reply #1 on: January 21, 2007, 02:51:23 PM »
i had considerd (spelling?) it but for the 460 of mine there is many better options. ;D
tfs. blue thunder frpp.  just my .02  ralph
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

CHEAP, FAST, RELIABLE...PICK 2 CANT HAVE ALL 3
Quote
They are all fukin tasty. My long time favorite, "Dirty Dicks -beerjet-
Glasscutter, Skip, OC2  Nordie and many more nail me good every time, relentlessly, I love those guys!

Taylor SJ

  • Karma: +6/-0
Re: aluminum heads
« Reply #2 on: January 23, 2007, 08:44:53 AM »
please educate me. tfs? blue thunder frpp? gotta know!
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Ralph Brunt

  • Karma: +51/-0
Re: aluminum heads
« Reply #3 on: February 05, 2007, 07:44:29 PM »
i'd love to taylorsj but for what kind of motor are you talking about all the heads i was talking about are for the 460.  ralph
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

CHEAP, FAST, RELIABLE...PICK 2 CANT HAVE ALL 3
Quote
They are all fukin tasty. My long time favorite, "Dirty Dicks -beerjet-
Glasscutter, Skip, OC2  Nordie and many more nail me good every time, relentlessly, I love those guys!

Taylor SJ

  • Karma: +6/-0
Re: aluminum heads
« Reply #4 on: February 22, 2007, 09:49:17 PM »
yes - for the 460 bbf. what are these heads you speak of and where do they come from?
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Ralph Brunt

  • Karma: +51/-0
Re: aluminum heads
« Reply #5 on: February 23, 2007, 07:55:00 PM »
taylor there are many to choose from as stated in the earlier post, so we would need to know the intended application and use. h/p goals rpm and the state of the bottom end. what cc's do you want the combustion chambers, that will greatly affect compression ratio. are your piston's dished? what heads do you have now?

i am by no means an expert but i will try to help or guide you in the right direction. i myself run the tfs streets with the 72cc combustion chambers flat top piston c/r is now 12.5 to 1 i have to run 108 octane fuel at 7.00 a gal.

i was running the d3 head on the same bottom end and was using 92 octane with no probs. my heads flow out of the box 255 cfm on the ex at .600 and something like 340in. my home home ported d3's probably didnt flow 200ex.
ralph
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

CHEAP, FAST, RELIABLE...PICK 2 CANT HAVE ALL 3
Quote
They are all fukin tasty. My long time favorite, "Dirty Dicks -beerjet-
Glasscutter, Skip, OC2  Nordie and many more nail me good every time, relentlessly, I love those guys!

Taylor SJ

  • Karma: +6/-0
Re: aluminum heads
« Reply #6 on: August 31, 2007, 07:27:00 PM »
I currently have D3VE heads on my BBF 460. Are these good? Or can I upgarde for a reasonable price? Bottom end is stock with an A impellor on a Berkeley Jet. Seems to have an RV type cam. Just want to see what it will take to get some more power. Will I need to switch to an A/B to see good results?
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

beerjet

  • Karma: +81/-0
Re: aluminum heads
« Reply #7 on: September 01, 2007, 08:25:59 PM »
I spoke with Paul Kane from High flow Dynamics (Ford gurus) On behalf of my buddies motor . With the stock ford heads , you are limited on lift due to the rocker arms . A little machine work and some roller rocker arms and and a cam to accomodate more lift , maybe a good port job while your in there should be a tremendous help . I dont know one ford head from another so this info might be useless .

I dont know anyone in texas either so . http://home.earthlink.net/~kaneofthenation/highflowdynamics/

Paul is really cool and very informative .

-beerjet-
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
i dont but im all for stuffin shit in her ass to make her go away :-*

Ralph Brunt

  • Karma: +51/-0
Re: aluminum heads
« Reply #8 on: September 03, 2007, 09:09:21 AM »
I currently have D3VE heads on my BBF 460. Are these good? Or can I upgarde for a reasonable price? Bottom end is stock with an A impellor on a Berkeley Jet. Seems to have an RV type cam. Just want to see what it will take to get some more power. Will I need to switch to an A/B to see good results?
your d3's can be made to support 600hp if done right, the? is do you want to spend the money there or on some aluminum heads? the other thing that comes to mind id c/r so what pistons do you have? dome/flat/dished? this will all come into play when selecting heads because the d3's combustion chamber is around 94 cc's and if you go to a 72cc chamber your c/r may not be pump gas friendly.

how many rpms are you turning with your current set up
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

CHEAP, FAST, RELIABLE...PICK 2 CANT HAVE ALL 3
Quote
They are all fukin tasty. My long time favorite, "Dirty Dicks -beerjet-
Glasscutter, Skip, OC2  Nordie and many more nail me good every time, relentlessly, I love those guys!

just squirtin

  • Karma: +1/-0
Re: aluminum heads
« Reply #9 on: September 13, 2007, 04:03:11 PM »
last year i was running stock 460 in an 18 ft southwind with some pump work and was running about 65=installed a set of alum heads and now pushing 77 =and the torque is amazing =definetly worth the $$$  hell of a hole shot=get my droop and ride plate and loader and will be seeing mid 80's on 87 octane
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

 

Null

SMFPacks CMS 1.0.3 © 2020