BBF mini starter wiring

  • 6 Replies
  • 536 Views

flames

  • Join Date: May 2013
  • *
  • Jr. Member
  • **
  • Posts: 71
  • Karma: +0/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« on: May 14, 2019, 08:08:50 AM »
I am installing a mini starter on my boat. The stock starter has three wires red to the battery a tan and a yellow. The new starter has a place for 2 one is the battery. How do you wire this up or what wire do you use. I attached pics of old starter




Sent from my iPhone using SoCal Jet Boats mobile app


angermgmt

  • Join Date: Feb 2007
  • Location: Bullhead City AZ
  • *
  • Sr. Member
  • ****
  • Posts: 471
  • Karma: +8/-0
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #1 on: May 14, 2019, 08:35:51 AM »
Take a pic of the new starter


Sent from my iPhone using SoCal Jet Boats

angermgmt

  • Join Date: Feb 2007
  • Location: Bullhead City AZ
  • *
  • Sr. Member
  • ****
  • Posts: 471
  • Karma: +8/-0
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #2 on: May 14, 2019, 09:15:06 AM »
Jet Boat Engine Harness Diagrams
 Here are 4 different engine harness diagrams, complete with wire gauge and colors.

Two of them show points ignition w/1 wire and 3 wire alternators.

The other two show HEI ignition w/1 wire and 3 wire alternators.

If you're using an aftermarket ignition such as an MSD, be sure and follow their instructions for wiring the box to the distributor.

If you're using an MSD R2R distributor by itself:
Black = Ground
Red = Ignition Hot & (+) terminal of coil
Orange = Tach Signal & (-) terminal of coil
No ballast resistor required


 https://www.socaljetboats.com/index.php?topic=2326.msg31060#msg31060


Sent from my iPhone using SoCal Jet Boats

flames

  • Join Date: May 2013
  • *
  • Jr. Member
  • **
  • Posts: 71
  • Karma: +0/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #3 on: May 14, 2019, 10:27:24 AM »
Here is a picture

angermgmt

  • Join Date: Feb 2007
  • Location: Bullhead City AZ
  • *
  • Sr. Member
  • ****
  • Posts: 471
  • Karma: +8/-0
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #4 on: May 14, 2019, 11:21:22 AM »
Hereís mine.


Sent from my iPhone using SoCal Jet Boats mobile app

flames

  • Join Date: May 2013
  • *
  • Jr. Member
  • **
  • Posts: 71
  • Karma: +0/-0
  • Registered User
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #5 on: May 14, 2019, 04:06:24 PM »
Currently I am not running a solenoid looks like I will have to run one now


Sent from my iPhone using SoCal Jet Boats

angermgmt

  • Join Date: Feb 2007
  • Location: Bullhead City AZ
  • *
  • Sr. Member
  • ****
  • Posts: 471
  • Karma: +8/-0
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #6 on: May 14, 2019, 04:40:05 PM »
Iím not an expert. There are alternate ways to wire it depending on what you have. Mine has always had the aux solenoid so it was easiest to keep it.  Check out the diagrams a listed previously in that long post and Iím sure youíll have some experts pipe in soon. 


Sent from my iPhone using SoCal Jet Boats

 


Website Security Test
Powered by EzPortal

Website Security Test