Null


cam identification

  • 5 Replies
  • 1349 Views

2savage4you

  • Join Date: Jul 2007
  • Location: Bullhead city
  • *
  • Informative Member
  • *******
  • Posts: 5,244
  • Karma: +14/-1
    • View Profile
  • Liked:
  • Likes Given: 0
« on: February 04, 2008, 04:10:30 PM »
What if any are the marks to look for on a used cam? Im just curiouse to know what was in my engine.  cause im thinking about using it again. Numbers on the back are 975481

2sav


pw_Tony

  • Join Date: Aug 2007
  • Location: Bullhead City, AZ
  • *
  • Macho Member
  • ******
  • Posts: 2,162
  • Karma: +12/-0
  • Is there a Ustream for the long beach races this weekend?
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #1 on: February 04, 2008, 04:16:13 PM »
There's usually marks on the cam lobs. It usually gos up one side of the lobe, centers out at the top, and goes down a side on the return side. A cam will have a wear mark at the very top, and if that wear marks goes all the way across means it's been good and used, but if it's centered on the lobe it has some life left in it

HDriderTH

  • Join Date: Nov 2006
  • Location: Las Vegas Nevada
  • *
  • Informative Member
  • *******
  • Posts: 3,525
  • Karma: +12/-0
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #2 on: February 04, 2008, 04:20:38 PM »
look at the end of the cam, usualy the back

'82 Sanger Bubble deck, Blown 454....V-drive

2savage4you

  • Join Date: Jul 2007
  • Location: Bullhead city
  • *
  • Informative Member
  • *******
  • Posts: 5,244
  • Karma: +14/-1
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #3 on: February 04, 2008, 04:28:42 PM »
look at the end of the cam, usualy the back


Thats where i pulled the #'s from ;)

2sav

HDriderTH

  • Join Date: Nov 2006
  • Location: Las Vegas Nevada
  • *
  • Informative Member
  • *******
  • Posts: 3,525
  • Karma: +12/-0
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #4 on: February 04, 2008, 04:31:43 PM »
Sorry, i read it block instead of back. Next step is determine who made it.

'82 Sanger Bubble deck, Blown 454....V-drive

TIMINATOR

  • Join Date: Mar 2007
  • Location: Avondale,AZ. 85392 (West Phoenix)
  • *
  • Full Member
  • ***
  • Posts: 230
  • Karma: +5/-0
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #5 on: February 04, 2008, 09:20:57 PM »
I have a cam dr, it reads out the lift,duration(advertised),duration at .050, lobe separation angle, ramp rates etc. I charge $15.00 for the readout. You can meet me at my Havasu house or ship it here,(Avondale,AZ) TIMINATOR  623-877-8553
TUFENUF MARINE PERFORMANCE  623-877-8553
COMPLETE ENGINE MACHINESHOP & PERFORMANCE
JET PUMPS!!!
PM or call me with JETTECH questions for HOTBOAT MAGAZINE!!  see them in the magazine!! OOPS! not anymore! HOTBOAT is boobs up! MODESTY IS A CRUTCH FOR THE INCOMPETENT!

 


Website Security Test
Powered by EzPortal

Website Security Test