2savage4you

  • Karma: +14/-1
How many use the stock electronic dizzy in there ride ?

I currently have a converted points to electronic dizzy with the crane module and rev limiter but im thinking about going stock just to get it running and have less wires and shiat hanging on the engine...

I do plan on an upgrade after i run the boat awhile , but my main concerne is to get it running the easiest way
So how many use the stock stuff
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

76 Bonneville

  • Karma: +25/-0
Re: Distributors.........................yes they belong in the back
« Reply #1 on: March 10, 2009, 02:06:36 PM »
I've been running a stock dist. with the electronic conversion for 18 years in my Advantage.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Nick

  • Karma: +1/-0
Re: Distributors.........................yes they belong in the back
« Reply #2 on: March 10, 2009, 03:10:40 PM »
The Hallett I just picked up has a stock dizzy with a pertronix electronic unit in it and it works fine.
  • Boat #1: 2012 California Performance 19'
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

2savage4you

  • Karma: +14/-1
Re: Distributors.........................yes they belong in the back
« Reply #3 on: March 10, 2009, 03:51:03 PM »
Ok so far we have 2 dizzy's that arent stock..

Both have conversions,....

Im talking about a  HEI ignition dizzy  ???

They are really cheap  ;D
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

koyota93

  • Karma: +0/-0
Re: Distributors.........................yes they belong in the back
« Reply #4 on: March 10, 2009, 05:59:13 PM »
Not stock here either. I run a MSD HEI Billet.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

76NORDIC

  • Karma: +23/-0
Re: Distributors.........................yes they belong in the back
« Reply #5 on: March 10, 2009, 08:04:20 PM »
Hey Steve I see ya cut me off for razzin ya on your assbackwards dizzy ;D Well for my in the right place dizzy I ended up buying a marine MSD dizzy from Summit. I like it cause it was cheap, compared to buying a dizzy and a box. Was like 280 or so and is basically plug and play. Have had it for 3 years and never a prob. Just my .02, and a killer job you are doing ;D       Mark
  • Boat #1: 76 Nordic BBF 460 Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
The definition of insanity: Doing the same thing over and over again, and expecting different results.....Einstein

I refuse to call people an ass anymore. It insults hard working donkeys worldwide!

2savage4you

  • Karma: +14/-1
Re: Distributors.........................yes they belong in the back
« Reply #6 on: March 10, 2009, 08:07:20 PM »
Hey Steve I see ya cut me off for razzin ya on your assbackwards dizzy ;D Well for my in the right place dizzy I ended up buying a marine MSD dizzy from Summit. I like it cause it was cheap, compared to buying a dizzy and a box. Was like 280 or so and is basically plug and play. Have had it for 3 years and never a prob. Just my .02, and a killer job you are doing ;D       Mark


Hey thanks Mark ;)

Yes i did have you in mind when i posted this :D  Plug n play i will have to check that out
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Nordie

  • Karma: +13/-0
Re: Distributors.........................yes they belong in the back
« Reply #7 on: March 10, 2009, 08:09:01 PM »
points are fine just not the most performance worthy...a conversion is one extra wire that goes to the coil....points only one wire....not much difference really little buddy...your this far along just do it how you want to NOW and not come back and fix it later...you have been patient this long just get it right...
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party


If im not posting..I'm pooping!

76NORDIC

  • Karma: +23/-0
Re: Distributors.........................yes they belong in the back
« Reply #8 on: March 10, 2009, 08:44:48 PM »
Hey Steve I agree with Josh just get her done :sly:  Check out the MSD8560 or the pertronix D200801   The first is 295.95 and the other is 228.39, and thats from summit. Dang I just gave ya part #'s for a dang Cheby   ;D ;D  I hope my puter dont crash on me for that ;D
  • Boat #1: 76 Nordic BBF 460 Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
The definition of insanity: Doing the same thing over and over again, and expecting different results.....Einstein

I refuse to call people an ass anymore. It insults hard working donkeys worldwide!

crewchief22

  • Karma: +66/-0
Re: Distributors.........................yes they belong in the back
« Reply #9 on: March 10, 2009, 08:58:17 PM »
I have a Pertronix conversion in an old Mallory dual point housing, working great.

Old mallory dual point,  free
Pertronix conversion,   $60.00
Being on the water,    priceless  ;D
  • Boat #1: '77 Hondo Pantera GT Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Racing is life!  Anything that happens before or after, is just waiting"    Steve McQueen

The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?

76NORDIC

  • Karma: +23/-0
Re: Distributors.........................yes they belong in the back
« Reply #10 on: March 10, 2009, 09:09:10 PM »
I agree with ya Crew  Summit also sells the conversion kits, would be a cheaper, and just as reliable way to go, for me was just getting a billet dizzy, no box, and plug and play, is what sold me tho. Just my .02   
  • Boat #1: 76 Nordic BBF 460 Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
The definition of insanity: Doing the same thing over and over again, and expecting different results.....Einstein

I refuse to call people an ass anymore. It insults hard working donkeys worldwide!

electrowoman

  • Karma: +1/-0
Re: Distributors.........................yes they belong in the back
« Reply #11 on: March 10, 2009, 09:16:40 PM »
Tell me again why the distributor is in the back where you can't reach it......

FORD, HAS A BETTER IDEA.....   

I'm running..............  ;D
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

76NORDIC

  • Karma: +23/-0
Re: Distributors.........................yes they belong in the back
« Reply #12 on: March 10, 2009, 09:18:52 PM »
Tell me again why the distributor is in the back where you can't reach it......

FORD, HAS A BETTER IDEA.....   

I'm running..............  ;D
      OK now dont get Steve started >:D
  • Boat #1: 76 Nordic BBF 460 Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
The definition of insanity: Doing the same thing over and over again, and expecting different results.....Einstein

I refuse to call people an ass anymore. It insults hard working donkeys worldwide!

 


Null

SMFPacks CMS 1.0.3 © 2020