SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: beerjet on March 09, 2007, 08:21:34 PM

Title: Evac system install.
Post by: beerjet on March 09, 2007, 08:21:34 PM
Where is the best location and do I have to cut a hole for the entire tube to fit in or does it get surface mounted with small hole drilled in the collector.Pictures would help me alot.

-beerjet-
Title: Re: Evac system install.
Post by: Ralph Brunt on March 09, 2007, 08:30:04 PM
omar i got a set of bbc headers allready set up they aint pretty bt there yours if you want them?? i'll bring um to the swapmeet sun if you want
Title: Re: Evac system install.
Post by: beerjet on March 09, 2007, 09:18:06 PM
omar i got a set of bbc headers allready set up they aint pretty bt there yours if you want them?? i'll bring um to the swapmeet sun if you want
I would love to take them off your hands but I dont think I'll be goin the swapmeet . Got any pics of them .

-beerjet-
Title: Re: Evac system install.
Post by: hotrod56cars on March 09, 2007, 09:27:21 PM
(I'm just lurking on the sidelines so I can find out what in the hell an evac system is.  ??? )
Title: Re: Evac system install.
Post by: beerjet on March 09, 2007, 09:53:05 PM
(I'm just lurking on the sidelines so I can find out what in the hell an evac system is.  ??? )
I'm sure you've seen it . Tubes that go from your breathers to the headers .

-beerjet-
Title: Re: Evac system install.
Post by: hotrod56cars on March 09, 2007, 10:06:53 PM
Oh yeah, I've seen that - on a race boat!  ;D
Title: Re: Evac system install.
Post by: Ralph Brunt on March 10, 2007, 05:53:48 AM
(http://www.hotboatpics.com/pics/data/500/12022ready_013.jpg)
i will get you pics of the other headers today. they are bassett's i think. if brad is going to the swapmeet i can give them to him if you want.
ralph
Title: Re: Evac system install.
Post by: beerjet on March 10, 2007, 08:41:39 AM
I really appreciate it Ralph . Dont worry about getting them to me though , I wouldnt want you dragging them around . I'll see how my week goes and I'll probably just shoot over to your place and pick them up .

-beerjet-
Title: Re: Evac system install.
Post by: hotrod56cars on March 10, 2007, 09:40:48 AM
I need some more specifics. What's the piece in the middle of the lines, a filter? What are the pieces on the valva covers, filters or PCV's?
Title: Re: Evac system install.
Post by: Ralph Brunt on March 10, 2007, 10:05:14 AM
the peice on the headers is like a one way valve and on the valve covers is just a breather. if you go to summitt or jegs you can see them there i beleive moroso makes the kit, as well as others.