SoCal Jet Boats

Classifieds => Engines / Engine Parts For Sale => Topic started by: River Dad on December 06, 2009, 08:43:05 PM

Title: BBF Bassett twisties with injection lines
Post by: River Dad on December 06, 2009, 08:43:05 PM
BBF Bassett twist style headers with injector lines. Chrome is in good shape with the usual discoloring of the primaries and a small amount of rust between the pipes. One of the injection tubes came loose and needs to be tacked back to the fitting (see photo)

(http://i20.photobucket.com/albums/b204/rousefamily4/P1010004-1.jpg)

(http://i20.photobucket.com/albums/b204/rousefamily4/P1010006.jpg)

Title: Re: BBF Bassett twisties with injection lines
Post by: 78centurian on December 06, 2009, 09:09:58 PM
how much??
Title: Re: BBF Bassett twisties with injection lines
Post by: River Dad on December 07, 2009, 09:41:05 AM
Oh yeah, that would help hugh.....   Asking $375    From what I hear the twisties are worth some power for an aspirated motor over std headers on the dyno.   
Title: Re: BBF Bassett twisties with injection lines
Post by: whitedog1999 on December 20, 2009, 10:19:28 AM
Hey River Dad what is the measument from the exhaust port to the bottom side of the pipe. My hull is tall and i need to see if they would fit. Thanks
Title: Re: BBF Bassett twisties with injection lines
Post by: River Dad on December 20, 2009, 10:26:20 PM
Whitewog,  I came across a complete 460 project motor that needed headers so I think I'll keep em.  I had a guy e-mail me and told me they were only worth 50-75 bucks because they needed to be re-chrome plated ::)   

I'll keep an eye out for you though!   RD
Title: Re: BBF Bassett twisties with injection lines
Post by: BOOST on December 20, 2009, 10:30:35 PM
Whitewog,  I came across a complete 460 project motor that needed headers so I think I'll keep em.  I had a guy e-mail me and told me they were only worth 50-75 bucks because they needed to be re-chrome plated ::)   

I'll keep an eye out for you though!   RD
  I saw these headers 50-75 bucks wtf they look great :screwy:
Title: Re: BBF Bassett twisties with injection lines
Post by: HDriderTH on December 21, 2009, 09:16:32 AM
Yea ok, the headers are 75 but the stainless waterlines are 3 hundo.
Title: Re: BBF Bassett twisties with injection lines
Post by: whitedog1999 on December 21, 2009, 03:14:23 PM
Thanks River Dad.. I should have asked if you still had them !! LOL...  Yes looking for something used .. Just have to make sure they fit... I was out messing with it today but I didnt get a good measument i will in the next couple days!! Thanks again !!!