ok sooo now i have my pump all apart...what should i be lookig for with the ware ring? should this be replaced ? and i have a standard A cut alum. impeller thats in good shape no dings chips ...nothing..so how do i size a new ware ring? thanks for any help
Assuming you have a non sholdered wear ring there is no real accurate way to measure it (especially once removed) without sofisticated tools, you can use a dial caliper to span and measure the impeller skirt and get some idea of what you might need. If your commited to replacing the W/R anyway the impeller should measure (standard) 7.225+ or- (if perfect) , if much undersize you'll need to machine it to say .005 under or .010 etc and the go back with a oversize W/R to compensate Tom
Author
Topic: berk rebuild/refresh (Read 2827 times)
