Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - $HAG NA$TY

Pages: [1] 2 3 4
1
Engine Mechanical / Electrical / Re: Sand in my engine!!!!
« on: February 22, 2014, 12:37:38 PM »
If its on the stand... I took all the plugs out and put my pressure washer to it.. got the job done

Sent from my ADR6400L using SoCal JetBoats mobile app


2
Engine Mechanical / Electrical / Re: BBF 460/Cam options
« on: February 12, 2014, 09:01:15 PM »
Pump setup.. no sho or ride plate..

Sent from my ADR6400L using SoCalJetBoats mobile app


3
Engine Mechanical / Electrical / Re: BBF 460/Cam options
« on: February 12, 2014, 08:59:30 PM »
Few pics.. bottom 2 are of now motor the 2nd pic is of all the top-end Purdy stuff 8)

Sent from my ADR6400L using SoCalJetBoats mobile app


4
Engine Mechanical / Electrical / Re: BBF 460/Cam options
« on: February 12, 2014, 08:51:49 PM »
Guess I should also state the boat is an 18ft Nordic bubble deck with a JB pump, Dominator bowl (fully detailed front to back with stuffer plate) detailed aluminum A impeller from rex marine. Not expecting 100 mph with what I got but I it to descent. Let's just say I wanna get 65-75 out of her

Sent from my ADR6400L using SoCalJetBoats mobile app


5
Engine Mechanical / Electrical / BBF 460/Cam options
« on: February 12, 2014, 08:44:08 PM »
To make a long story short I tore down my 460 in my boat at the end of summer and found I had a few ovaled cylinders also a leaky valves after a good 12 yrs of use it was a good motor. My initial plan was to have a 557 built but funds are not allowing as of now and the other day I picked up a fresh from machine shop .30 over semi dished pistons stock OEM rods/crank for dirt cheap $500 (guy decided he wants a Chevy so I win) but for the 557 I purchased a wiand dual t-ram with 750's on top (used to have a single offy t-ram with 850) also I have a set of procomp aluminum heads I purchased from a fellow boater, which were bare heads when he got them but had stainless Manley valves and have springs that he says are capable of up to 700 lift.. (I know some don't like procomp but have been told they are a good head to purchase bare) anyway.. I am going to call lunati tomorrow and try to get some kinda custom grind to match what I have going on. Figured I'd ask here first because, well its for a jet boat! LOL if anyone has input like what cams they have used I'm pointing more toward hydraulic flat rapper w/ roller rockers.. thanks in advance!

Sent from my ADR6400L using SoCalJetBoats mobile app


6
Project Boats For Sale / Re: Bahner 18' jet project
« on: November 26, 2013, 09:51:16 PM »
Wow! If I was in cali still I'd be on my way home with it!

Sent from my ADR6400L using SoCalJetBoats mobile app


7
The No Wake Zone / Re: post "BEST" of 2013 (pic)
« on: November 05, 2013, 11:28:37 PM »
A bayou less than a he away from my house

Sent from my ADR6400L using SoCalJetBoats mobile app


8
The No Wake Zone / Re: post "BEST" of 2013 (pic)
« on: November 05, 2013, 11:26:02 PM »
Had a great time in Texas with family and New friends! Coming out here not really knowing what it was like.. finished my boat in time to enjoy it for a few months and met some cool peeps! Granted its not "the river" but I'd admit some of these bayous and rivers are really fun to boat at!

Sent from my ADR6400L using SoCalJetBoats mobile app


9
The No Wake Zone / Re: Can't go in the garage and drool on the boat!!
« on: October 29, 2013, 06:18:40 PM »
Nice

Sent from my ADR6400L using SoCalJetBoats mobile app


10
Boat Showcase / Re: 74 hallett
« on: October 29, 2013, 05:45:38 PM »
Yea.. just go on prestoliteperformance.com and get the number.. I sent mine in to have it rebuilt and they recommended a unilite and I have had no problems..

Sent from my ADR6400L using SoCalJetBoats mobile app


11
Boat Showcase / Re: 74 hallett
« on: October 29, 2013, 05:42:04 PM »
I had a points dizzy for years and one day it just gave up.. called Mallory and sent it in and they gave me a unilite... Cost me about $150 it was a re-man but basically brand new.. couldn't tell the difference.. oh and unless its a closed engine compartment on a boat you do not need a marine dizzy.. just get a standard automotive one..

Sent from my ADR6400L using SoCalJetBoats mobile app


12
Random Boat Parts For Sale / Re: Some stuff for sale
« on: October 29, 2013, 12:59:22 PM »
Yup


Sent from my iPhone using SoCalJetBoats
can you send me some pics? What's wrong with them? (281) 900-6390 thanks my name is Phil

Sent from my ADR6400L using SoCalJetBoats mobile app


13
Random Boat Parts For Sale / Re: Some stuff for sale
« on: October 29, 2013, 12:19:43 PM »
Do you still have the carbs?


Sent from my ADR6400L using SoCalJetBoats mobile app


14
Random Boat Parts For Sale / Re: Weiand tunnel ram with carbs
« on: October 05, 2013, 09:52:56 AM »
No Biggy thanks

Sent from my ADR6400L using SoCalJetBoats mobile app


15
Random Boat Parts For Sale / Re: Weiand tunnel ram with carbs
« on: October 05, 2013, 12:17:15 AM »
Are you willing to seperate the carbs and linkage and lines? Basically everything but the t-ram? I got a bbf and just picked up a t-ram and am in needof a carb set up.. thanks

Sent from my ADR6400L using SoCalJetBoats mobile app


16
Suggestions / Support / Re: iPhone Users
« on: September 27, 2013, 09:22:47 PM »
I can upload pictures but only one at a time.. like if I try to post 2 pics it will only upload the 2nd one..

Sent from my ADR6400L using SoCalJetBoats mobile app


17
Project Boats For Sale / Re: Project Boats on Craigslist
« on: September 27, 2013, 09:15:58 PM »
I like free....

Sent from my ADR6400L using SoCalJetBoats mobile app


18
Engine Mechanical / Electrical / Re: A few pics from this summer.
« on: September 27, 2013, 08:58:33 PM »
Bitchin sunset

Sent from my ADR6400L using SoCalJetBoats mobile app


19
Engine Mechanical / Electrical / Re: A few pics from this summer.
« on: September 27, 2013, 08:56:31 PM »
This is a fun little river not too far from my house.. 30 mins away.. kinda reminds me of blythe8)

Sent from my ADR6400L using SoCalJetBoats mobile app


20
Engine Mechanical / Electrical / Re: A few pics from this summer.
« on: September 27, 2013, 08:53:44 PM »
I'm giving it a break.. gunna be building a 557 over the winter..

Sent from my ADR6400L using SoCalJetBoats mobile app


21
Engine Mechanical / Electrical / Re: A few pics from this summer.
« on: September 27, 2013, 08:52:51 PM »
Most people go all year long.., there's a lot of people out here. I've only met a few but the hot boating scene is strong

Sent from my ADR6400L using SoCalJetBoats mobile app


22
Engine Mechanical / Electrical / Re: A few pics from this summer.
« on: September 27, 2013, 08:51:14 PM »
Showing of for the ladies on the beach :-[

Sent from my ADR6400L using SoCalJetBoats mobile app


23
Engine Mechanical / Electrical / Re: A few pics from this summer.
« on: September 27, 2013, 08:49:39 PM »
Launching

Sent from my ADR6400L using SoCalJetBoats mobile app


24
Engine Mechanical / Electrical / Re: A few pics from this summer.
« on: September 27, 2013, 08:48:26 PM »
ME AND MY BUDDY JOHN

Sent from my ADR6400L using SoCalJetBoats mobile app


25
Engine Mechanical / Electrical / Re: A few pics from this summer.
« on: September 27, 2013, 08:47:07 PM »
PICS

Sent from my ADR6400L using SoCalJetBoats mobile app


Pages: [1] 2 3 4

Website Security Test
Powered by EzPortal

anything
Website Security Test