Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Ema Non-Performance Marine - BANNED

Pages: [1] 2 3 ... 38
Boat Racing / March 1-2 APBA/SCSC Bakersfield Winter Regata - Boat Count ?
« on: February 03, 2008, 10:10:39 PM »
So who is going to make it ?

Nostalgia Jet


Comp Jet


WarZone / Re: Chuck Fukin Norris !
« on: January 25, 2008, 11:35:34 PM »
I would put the Duck Hunter up against Chuck any day of the week now !

WarZone / Re: Chuck Fukin Norris !
« on: January 25, 2008, 11:34:01 PM »
He is lookin old ! Saw him on a talk show the other night. O0

Interior / Re: Splash Guards ???
« on: January 25, 2008, 07:58:56 PM »
Roger and David have done some real nice work for me, they are who I use for all my powder coating here in the Mohave County Area !

Engine Mechanical / Electrical / Re: MOTOR MOUNT QUESTION
« on: January 25, 2008, 07:55:06 PM »
I ran that type of mount for a season and a half racing ! Worked OK till we started to make over 580hp ! And then the car mount steel was the week point, kept bending &  them.

Engines / Engine Parts For Sale / Re: Hardin Marine RTR 455
« on: January 24, 2008, 10:02:37 PM »
Stop posting for that I hve a chance of catching you!

Wow ! Not bad for an Olds !
He can't stop it is an addiction.

Random Boat Parts For Sale / Re: 55 Gallon Tank
« on: January 24, 2008, 09:58:14 PM »
How about some dementions please ?
Very interesting thoughts with that one.

Engines / Engine Parts For Sale / Re: what should i sell this for?
« on: January 24, 2008, 07:49:23 PM »
We need pictures ! ;D

The No Wake Zone / Re: Now I've seen it all!
« on: January 24, 2008, 07:47:49 PM »
Here a little more reading on the subject;

Engine Mechanical / Electrical / Re: Camshaft selection?
« on: January 22, 2008, 10:17:45 PM »
One more thing, what neccesitates (sp?) the use of stud girdles?? Lift? RPM?  ???

Spring presure, cam lift and duration as well as RPM.

But in the average lake style boat you should not need a ton of lift, spring presure or duration. It is all good and well to have a fast boat and for it to sound mean as hell, but why ? When you go out with your family and you can't run mufflers (too much back presure), Your ears start to bleed from 800 BBF hp on dry headers and you have to shut it down when every the cops are around what good is it really ? Yes it is way cool, and I love the sound ! But not practical. You can make 550hp & 600'lbs with a very mild combo 9:1, 278 XM cam, Stealth intake and some real good head work. As long as you do plenty of block and head prep the thing should live at 5K for a very long time and be easy on parts.

Engine Mechanical / Electrical / Re: MSD 6M-2 Marine Ignition
« on: January 22, 2008, 05:50:22 PM »
Does anyone have any performance info / feedback on these?  What kind of power gains, etc.  Are they worth the money?


The biggest most important question is do you have an enclosed engine compartment ?
If so you need the Marine version if not go with the 6AL. They are all about the same in the way of water resistance but the USCG stamp and aprovale is why it has the extra cost, spark surpresion !

Engine Mechanical / Electrical / Re: Backwards or forwards
« on: January 21, 2008, 10:07:38 PM »
Correct me if I'm wrong, but I think Beerjet has little birdies flying around his head - not butterflies.   ;)

I saw him using a Shotgun at Parker in April, Ducks !
I am just surprised he didn't have a dog with him or waders ! ;D

Boat Racing / Re: NJBA Bouys
« on: January 21, 2008, 08:34:11 PM »
Which one are you talking about, turn 1, 2 or 3 ? ;D

Engine Mechanical / Electrical / Re: 455 square exhaust manis
« on: January 21, 2008, 07:02:50 PM »
The cool thing is there are some people coming out this way soon for the SCORE race, I am sure someone would have room in there truck to get it back close to you and then maybe someone else can get it even closer and so on.

Just a thought !

Is anyone going to help wanabe out ?

WTB / Re: Need help finding Beede gauges/
« on: January 21, 2008, 05:28:58 PM »
How about these ?

check pms !

WTB / Re: Tubes
« on: January 21, 2008, 05:25:00 PM »
Go to the hardware store and get some black pipe cut it in the middle. Then cut the ends at the same angle the tubes are cut in you other headers. $2.65 and some labor !

Engine Mechanical / Electrical / Re: Backwards or forwards
« on: January 21, 2008, 05:21:23 PM »
Yes it can cause an over charge but it looks cooler !
As long as there are hole in the bottom or back of the scoop you would be fine, except if you get roosted. Then you will eather have very clean pistons tops or a hydro-locked engine.

WTB / Re: Need help finding Beede gauges/
« on: January 21, 2008, 04:57:20 PM »
CP performance also caries them I believe !

WTB / Re: Tubes
« on: January 21, 2008, 04:55:32 PM »
For a Pan-E-Vac system . All I need Is the tubes that go into the headers if anyone has any they are kicking around .

Not sure but I think the Moroso Kit and the Mr. Gasket kit are around $28 and they come with the one way valves.

Engine Mechanical / Electrical / Re: A little help please
« on: January 21, 2008, 04:53:37 PM »
Buy it and sell the rods on eBay ! ;D

Engines / Engine Parts For Sale / Re: 429/460 parts & engine is sold
« on: January 21, 2008, 04:30:36 PM »
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$125 a pair

D3VE heads (unmarked version) nice clean stock take offs very low hrs.
 $125 a pair

Edelbrock Performer 460

A set of new Comp Cams 926-16 valve springs in box, 109 on the seat

Waterpump Block-off

Thermostat Housing

Cast Iron CJ intake

Berkeley 12JG bowl (split bowl)

American Turbine Suction Housing AT-309
(just housing/needs small repair)

AT impeller shaft (with all HP bearing kit parts/needs new bearing)

AT impeller shaft

12jb pump, complete suction housing (w/impeller & shaft)

Berkeley 12JB bowl (split bowl)

I have a set of 4, 35x12.5R15/C BFG Mud-Terrain KM.  They are mounted on a set of 15x10 5 on 5.5" bolt pattern Eagle 1069s, 1/2 ton Ford and Dodge as well as the CJ jeeps.  These tires have very little use maybe 5 miles.  Been sittin for about a year.  Still in excellent shape.  This tire & wheel combo NIB is $1252 + state and FET tax.
$1000 wheels & tires or $600 for just tires

Pick-up Pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers,1979.0.html
Engine is on a cart waiting for someone to pick it up !

18' white jet boat bare hull w/o papers (no trailer)
Boat is cut up into pieces and in my pick-up ! :D

I have 4 315/75R16 BFG Baja TAs (35") that are just sitting they are on ProComp Extreme Alloy wheels 16" x 9.75" with a 5 on 5.5" bolt pattern, 1/2 ton Ford and Dodge as well as the CJ jeeps.  They are almost new and have about 15 miles on them.  These have the bead lock ring and only three are blue the other is black.
$2000 tires & wheels or $1500 just tires
Prices above do not include shipping costs, No reasonable offer refused !

The No Wake Zone / Re: Check it out !!! White water jets
« on: January 21, 2008, 02:25:34 AM »
[yt=425,350]z-pAoKlXuxY [/yt]
[yt=425,350]O3wwdIi-Q5E [/yt]
[yt=425,350]QH001MdGBmE [/yt]
[yt=425,350]wfGASCx8YuE [/yt]
[yt=425,350]lYMEHldpWf8&mode=user&search= [/yt]
[yt=425,350]31MG0lW3uQA [/yt]
[yt=425,350]PpPWMJLxYBA [/yt]

The No Wake Zone / Re: Check it out !!! White water jets
« on: January 21, 2008, 02:19:36 AM »

The No Wake Zone / Re: Check it out !!! White water jets
« on: January 21, 2008, 02:18:27 AM »

The No Wake Zone / Re: Check it out !!! White water jets
« on: January 21, 2008, 02:17:11 AM »

Pages: [1] 2 3 ... 38


SMFPacks CMS 1.0.3 © 2020