Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Redeye1620

Pages: [1] 2
1
Engines / Engine Parts For Sale / WTB 460 Ford Exhaust Manifolds
« on: May 02, 2017, 08:40:55 PM »
In search of a pair of center rise aluminum exhaust manifolds for a 460.

2
It was pointed out to me that this manifold is NOT a C460, But actually a "M9424-G429" intake.  I corrected the C/L ad to reflect this.  If some one here on the board buys it I will include USA shipping with the purchase price.  Sorry for the misinformation.

3
Almost new Ford Motorsports M9424-G429 intake manifold.  $300 Including Shipping from nor cal.....-Rich

http://sacramento.craigslist.org/pts/5839031513.html

4
Engine Mechanical / Electrical / Re: 460 ford ring gap
« on: April 24, 2016, 04:59:15 AM »
Ring gap is determined by the piston manufacturer.  Contact them for their specs.  FYI, I just completed my 460 build yesterday.  Lots of good info here.

http://www.vintagejetboats.com/showthread.php?10648-Going-to-freshen-the-CV23-s-engine

5
The No Wake Zone / Re: Let's talk Insurance
« on: March 29, 2016, 09:49:41 AM »
I didn't see anybody recommending Nationwide.  My agent David Santana is a jet boat guy who writes policies all over the country.  916-517-9235 in northern cal.

6
Engines / Engine Parts For Sale / Re: BBF 460 heads & intake
« on: February 06, 2016, 07:12:15 AM »
These to have the heads and where are you located the c8ve

Sacramento. All of the heads have sold EXCEPT for the 78s. Last pair left

7
Engines / Engine Parts For Sale / WTB Hardin BBF 460 oil pan
« on: November 29, 2015, 07:17:53 AM »
Like the title says, need a Hardin BBF 10qt oil pan for a 460.....-Rich in Rocklin CA

8
Engines / Engine Parts For Sale / Re: WTT or WTB BBF victor #2966
« on: November 05, 2015, 05:48:35 PM »
Oh. Ok. I saw your other post.

D3VE A-2-A

9
Engines / Engine Parts For Sale / WTT or WTB BBF victor #2966
« on: November 04, 2015, 06:04:42 PM »
I'm wanting a clean Victor #2966 intake for my BBF 460 build.  I have a pair 74cc BBF fresh from the machine shop.  A used set of95cc  BBF heads to.  OR cash works if it make sense to both of us....-Rich in Rocklin

10
Engines / Engine Parts For Sale / BBF 460 heads & intake
« on: November 04, 2015, 04:47:06 PM »
I have 2 pair of 460 heads for sale.

Pair 74cc C8VE-E heads off of a 1968 Lincoln, brand new from the machine shop. $400

The other pair is very used 95cc 1978 stock heads. $100

Also a stock cast iron SCJ intake. $100

Holley 650cfm carb vacuum secondaries $175....

Located near Sacramento...-Rich in Rocklin

12
Engines / Engine Parts For Sale / Re: Oil restricting push rods
« on: February 22, 2015, 11:17:01 AM »
When You change ur rockers


Sent from my iPhone using SoCal Jet Boats

Also when you change cams check with the cam manufacturer.  Some use a smaller diameter base circle and then you need longer pushrods....

13
Trailers / Re: new rims what size tires
« on: February 22, 2015, 11:01:34 AM »
Be aware of the back spacing on these rims.  I bought similar wheels for my 26 foot nordic trailer & found out the wheels rub on the trailer frame.  Wasted time & money on my part.....

14
Hi, I've got 19 ft daytona tunnel.  It has no seats. Looking for buckets seats and rear seat in rebuild able condition and or already done. Let me know of have anything interesting. Thanks!

I have two buckets & a 46" wide bench.  They've been sitting in the Nevada desert for 24 months as per the the guy I bought the boat from.  I'm going with all new interior.  Both the bench & buckets have plastic frames.  The vinyl needs to be replaced as the sun damage & the PO was a smoker so the bench has burn holes in the back & seat cushion.  I think $300 is a fair price.  The only down side is I live in Sacramento.  Shipping would be a deal killer.

15
Random Boat Parts For Sale / 455 Oldsmobile left over parts
« on: August 20, 2014, 03:37:24 PM »

16

Whats the deal with the split in the bolt holes? And I'm looking for a victor jr intake mani. Thanks tho

My Harman logs have the same spilt also.  I use a large washer to span it.....

17
Engines / Engine Parts For Sale / Re: WTB 455 roller rockers
« on: July 13, 2014, 06:53:33 AM »
I hear they are the same as small block fords.

Sent from my SPH-D700 using SoCal Jet Boats mobile app

Like these???

http://www.ebay.com/itm/1-6-RATIO-289-302-351-FORD-ALUMINUM-SBF-ROLLER-ROCKERS-3-8-/360972333123?pt=Motors_Car_Truck_Parts_Accessories&hash=item540ba0b043&vxp=mtr

The full roller for olds are double this price.  At this price I may puller the trigger next payday.....-Rich

18
Engines / Engine Parts For Sale / Re: WTB 455 roller rockers
« on: July 12, 2014, 03:14:52 PM »
I have some comp cams roller tip rockers. Complete with rockers, studs, locks, guide plates and push rods.

200 plus shipping.

Pm me if interested



Sent from my iPhone using SoCalJetBoats


Thanks but, I have everything need except for the rockers. 

19
Engines / Engine Parts For Sale / WTB 455 roller rockers
« on: July 12, 2014, 01:51:05 PM »
I am looking for a good used set of roller tip rockers for my budget 455 rebuild. They must be for a 3/8 stud mount....Thanks....-Rich

20
Engine Mechanical / Electrical / Re: Cam break in suggestions
« on: June 13, 2014, 06:49:49 AM »
It is very important to use an oil with a high zinc contant to give your cam a chance to live a long life.  I use Vavoline 20-50 racing oill with high zinc content.   You can get it at any NAPA store for about $5-6 a quart.  Just for good measure I add a bottle of Lucas Engine Break-In Oil Additive with Zinc-Plus.  Also available from your local NAPA.  No I do not have any interest in NAPA....

21
Interior / Re: fender locks
« on: May 18, 2014, 04:40:05 PM »
Ebay has them listed..  Search boat fender locks. 

22
Pipe cleaners are a interesting approach think I'll just buy the ones with the holes choked down to .40 and may be do the external drains on the heads.

Take one of your pushrods to ACE Hardware & buy 16 roll pins that can be pressed inside & you're good to go & saved some $$$$.

I welded two 1/2" bungs in my valve covers for the return lines.  Saved having to pull the heads....-Rich

23
Engine Mechanical / Electrical / Re: 455 old motor, watter
« on: May 16, 2014, 06:19:40 AM »
Thanks guys for the info! I think I might know the problem I have to pull the valve covers off and clean them. Might have got some condensation. Got some new gaskets and will be changing them out tonight hopefully

You might consider a compression test to rule out a blown head gasket...This will give you a basic idea of the condition of your engine.....-Rich

24
Engine Mechanical / Electrical / Re: Need help 2
« on: May 07, 2014, 06:58:11 PM »
Does it cost a lot to put new a new cam and lifters on a 455 old

Sent from my SAMSUNG-SM-N900A using SoCal Jet Boats mobile app


Before changing the cam, it would be a good idea to do a compression & leak doewn test.  This will give you an idea what the internals off your engine are.  Any cam with a wore out engine is a waste of time & money.

25
Thank you for the education.  A little history, my barge is a 21' day cruiser, family boat that will never see 50 mph.  The engine is spinning a stock Jacuzzi YJ pump.  Fully loaded it tips the scales around 3,000-3,500 lbs.  Because of the weight of the boat & the pump's limitations, I am bascially limited to 5500 rpms.   So I didn't build the engine to max horse power, but more for economy & low end torque.  This is why the choice of a Edelbrock 650 carb. 

As to tuning it, I will be out on the lake Mother's Day weekend with my new jets, springs & metering rods. 

BTW the cable extension from Edelbrock worked like a charm.  Cut it to length & all is good.

Thank you all for sharing your knowledge & experences....-Rich

Pages: [1] 2

Website Security Test
Powered by EzPortal

Null

Website Security Test