Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - vrtkevin

Pages: [1]
1
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 27, 2016, 05:57:49 PM »
I will be putting in a transom so that is the need to take out the intake grate


Sent from my iPhone using SoCal Jet Boats

2
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 27, 2016, 05:57:03 PM »
Got the boat all grounded down. Found no rear transom started taking off the intake and 5 bolts broke in the process. Any pointers to get it off now?


Sent from my iPhone using SoCal Jet Boats

3
Events / Re: Waiting till April to run the boats again?
« on: January 19, 2016, 09:03:41 PM »
I'm in as long as I can get my stringers done by then.


Sent from my iPhone using SoCal Jet Boats

4
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 19, 2016, 07:45:24 PM »
I will give that a try in the morning. Thanks for the tip. I'm hoping to have it prepped by the weekend and start laying in the new stringers next week. Then flip the boat to prep the bottom for paint.


Sent from my iPhone using SoCal Jet Boats

5
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 19, 2016, 07:32:49 PM »
I'm using a 3m respirator the front 8 feet were easy the last 4 feet is super thick where the motor sits. I will get better pictures tomorrow


Sent from my iPhone using SoCal Jet Boats

6
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 19, 2016, 05:30:43 PM »
Here is the progress on grinding out the stringers. Any advice is welcome.


Sent from my iPhone using SoCal Jet Boats

7
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 19, 2016, 11:20:35 AM »
Or if they want to pull their boat for any odd reason. Always willing to help the jet boat community.


Sent from my iPhone using SoCal Jet Boats

8
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 19, 2016, 11:19:36 AM »
Thanks GT I will be pulling it from the trailer to put the stringers in. Going to make a stand as it's always nice to have and when done I can lend to others that have to do stringers.


Sent from my iPhone using SoCal Jet Boats

9
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 19, 2016, 11:08:59 AM »
Got the rest of the stringers out. About to start grinding it down and prep for the new stringers and floor.


Sent from my iPhone using SoCal Jet Boats

10
The No Wake Zone / Re: What did you do to your boat today?
« on: January 19, 2016, 11:06:48 AM »
Finished cutting out the stringers.


Sent from my iPhone using SoCal Jet Boats

11
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 18, 2016, 10:53:19 PM »
I would check the stringers if you have the floors out. There looks like some cracks in the pictures.. I got one complete side out and only 4' left on the other side.. Then the grinding starts.

12
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 15, 2016, 08:50:31 PM »
Today's update. Passenger side had about 2' of solid stringer of the 12' and so far 8' of the drivers side is shot. Pumps out and motor. Cutting and grinding away this weekend after TPM.


Sent from my iPhone using SoCal Jet Boats

13
The No Wake Zone / Re: What did you do to your boat today?
« on: January 15, 2016, 07:41:56 PM »
Nice look of the trailer. Here's my accomplishment. Along with yesterday's progress.


Sent from my iPhone using SoCal Jet Boats

14
The No Wake Zone / Re: What did you do to your boat today?
« on: January 15, 2016, 01:19:33 PM »
pulled the pump off my boat and cutting some more of the old stringers out.. thanks to mrblueeyes to keep me motivated on this build..hope to have the stingers completely out today and start grinding on them tomorrow after TPM.

15
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 14, 2016, 02:49:46 PM »
Has anyone seen a stringer step down from 2x5 to 2x2 after the engine compartment up to the front of the boat?


Sent from my iPhone using SoCal Jet Boats

16
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 13, 2016, 11:18:58 PM »
Yea I pm'd you earlier


Sent from my iPhone using SoCal Jet Boats

17
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 13, 2016, 11:09:21 PM »
Thanks man. I read half the thread so far.


Sent from my iPhone using SoCal Jet Boats

18
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 13, 2016, 10:46:42 PM »
Nice thank you. I might be picking your brain since you have done it and you're local


Sent from my iPhone using SoCal Jet Boats

19
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 13, 2016, 10:28:40 PM »
Which fiberglass did you use?


Sent from my iPhone using SoCal Jet Boats

20
Projects / Re: Stringer build on my 19' Saguaro Jet boat
« on: January 13, 2016, 08:54:13 PM »
I am hoping to get the floors and grinding done this weekend so I will be getting the new stringer wood and trying to source the fiberglass and resin bought on monday.

21
Projects / Stringer build on my 19' Saguaro Jet boat
« on: January 13, 2016, 08:42:06 PM »
So I was prepping it to repaint and noticed a lump in the floor. I figured since I was repainting the boat I might as well also do the carpet since the motor was out. Floor was new but after further investigating the stringers were dust. So any and all recommendations are appreciated. I will hopefully have the rest of the stringers out tomorrow and start flap wheeling the old stuff off. I see a few places to get the resin but I am wondering what fiberglass people have used.

22
Boat Showcase / Re: Lets See Your Rides
« on: December 11, 2015, 08:55:27 AM »
New to the forums but here is my boat. I will be repainting it this winter.

Pages: [1]

Website Security Test
Powered by EzPortal

Website Security Test