Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - sturat 514

Pages: [1] 2 3 ... 6
Boats For Sale / Re: 1979 Sanger SuperJet
« on: March 24, 2010, 06:53:32 AM »
A few more new pics and price reduction to 4,500 for boat minus motor. I have a stock BBF with a tunnel ram i can put in also have BBC plates and feet if you want to run BBC

Engine Mechanical / Electrical / Re: Intake Bolts
« on: March 23, 2010, 12:06:14 PM »
I used the SS ARP bolt w/the 12 point heads are they are MORE than long enough.
And they work really good on chevy exhaust logs.



Boats For Sale / Re: 1985 Placecraft tunnel drag
« on: March 23, 2010, 11:57:28 AM »
looks like the date on the camera is wrong. Notice the trucks in the background.
I saw this boat in Oct 2009 and it looks just liek the pictures. Ran like a raped ape also.

Audio / Re: How is ?
« on: March 18, 2010, 12:28:32 PM »
Do not know how small of a boat you have but i have this 19 open bow jet and for tunes i have
2 10's and 4 6-1/2's. No holes in the boat at all. it has a piece of alumin mounted under the shifter that holds the head unit and built boxs for the subs and mounted the amp on top of it. I have two 6-1/2 in the front and have two 6-1/2's by the rear seat in the panel.

Boats For Sale / 1979 Sanger SuperJet
« on: March 10, 2010, 07:49:39 AM »
it is time for me to sell my baby. I am putting Short Bus up for sale.
1979 Sanger Super Jet
Just about everything brand new on this boat all redone mid summer 2009.
Only thing i did not replace was the gauges as they all work great.
New cables New Shifter New helm New rack New rub rail. The boat is ready to hit the Lake Just add your power and run.
The pump is alos brand New never ran yet. I am puting berk split droop and PD on it again. They are at the powder coater now.
The boat is set up for BBF and if you want to RUN BBF i will throw in a great set of Hardin Plates and Baaset OT headers cermaic coated.
I also have a nice polished four point with feet if you want to run BBC
Asking $5,000 for the boat with no motor.

The No Wake Zone / Re: Wife G/F picture thread...
« on: March 09, 2010, 07:25:22 AM »
Here is the GF

The No Wake Zone / Re: boat insurance
« on: February 24, 2010, 01:01:35 PM »
Sk  My insured boat is 100% stock, just the way the factory made it.  TT logs and engine cover.
That is why you do not need to worry.
Most companies have no problen when you have TT and the engine is covered.

The No Wake Zone / Re: Vinyl Graphics?
« on: January 27, 2010, 02:00:00 PM »
Do you have anyother suggestions? Just want to get the boat's names made up nothing huge

The No Wake Zone / Re: Vinyl Graphics?
« on: January 27, 2010, 01:56:22 PM »
i heard he rather jack off leprechauns than make stickers  ::)
Sounds like maybe it took a bit for someone to make you some stickers?

The No Wake Zone / Vinyl Graphics?
« on: January 27, 2010, 01:45:03 PM »
I thought i have seen here before that someone makes them, who is it? I want to get some made up for my pile.

The No Wake Zone / Re: " HELP WANTED "
« on: December 30, 2009, 08:46:35 AM »
Aiight, that was wrong, on oh so many levels! Funny,  HELL yes!

No signs needed anymore, Just pull up with your truck and they will jump in..

Jet Pumps / Re: Sanger SJ jet intake
« on: December 15, 2009, 12:29:01 PM »
I may be the odd ball here but I thought the removal of the pump in my sanger was less of a pain in the a$$ than the one on my TX-19 with the berkley adapter? Just my .02 worth and Yes the Sanger ring looks super bitchn compared to the berkely.

The No Wake Zone / Re: stupid motorcycles
« on: October 15, 2009, 12:35:29 PM »
Ok. Now it hurts !!!!!     And I'm on my way to work, dont think I'm going to be able to do much with my hand like this.  This is going to be a problem.  :banghead:

 And no there was no drinking involved, just a bad decision and the bike got ahead of me.   I guess I was due, I've been riding on the street for 17 years now and this was my first time going down (dirt doesn't count).
There only two kinds of riders
Those that have
Those that will
I am in the first cat... worst one high speed wheelie blow over kinda cured me of that phase of my riding career.. 135 and hitting the road is not fun but all is good and now the front tire stays on the ground most of the time. if it leaves the pavement it is only a little power wheelie which with a ZX12R happens alot. Glad to hear you are ok and the bike will stind find a new home :thumbup:

« on: October 14, 2009, 10:22:45 AM »
This is not a personal attack on you or Texas...... ;)

Cost of living is typically dictated by median income....California's wages are typically quite a bit higher than that of Texas for the same job....60%, I don't know, but a lot...

I got the 60% based on my income and for me to maintain my current lifestyle i would have to make 59.65% more than i make here


Not an attack on you or Cali either
My to GD hot and humid was about us here in Houston the summers suck a$$ for sure

« on: October 08, 2009, 06:57:36 PM »
several friends from or in socal some like most do not
the GF is from Beaumont and says she will stay here
I hope it gets back to its glory years of yester year to much going for it to be pissed away

« on: October 08, 2009, 06:22:47 PM »
Texas has a bunch going for it.
Cost of living is 60% less than Cali
not run by a bunch of libs unless you live in Austin way to many tree huggers there for me
Tons of great lakes and rivers to boat on.
Lowest unemployent in the country not saying much now but we are low here
no state income tax
70.00 bucks a year to reg your car
65ish every two years for the boat
60ish for the trailer
Homes are very cheap in the Houston area new construction is about 75 a sqft
used is about 65 a sqft
awesome hunting and fishing
Way to GD hot and humid
I will take a hurricane every 15 years over the annual fires and earthquakes
Hell hurricanes you got plenty of notice to GTFO
I love Texas
Cali to me is a great place to visit no doubt about that. Has to be one of the most beatiful states there is

The No Wake Zone / Re: Summer is over :(
« on: October 06, 2009, 01:58:51 PM »
I love taking the boat out in the winter down here. We will get those sunny high 60's days and time to get wet. The motor sure loves that cold air and my beer stays colder longer sweater up and make a pass.

WarZone / Re: Miss me yet?
« on: October 01, 2009, 01:08:09 PM »
I thought this was going to be about Ray  ;D
Me too

What happened to him? get pissed off or what?

Interior / Re: marine grade carpet
« on: September 23, 2009, 06:34:47 AM »
Looking good keep up the work.  :thumbup:

Boat Showcase / Re: Sanger with the new power plant
« on: September 22, 2009, 08:19:08 PM »
looks worse from the camera angle but when in the boat on the water great line of sight around it.  :thumbup:

Boat Showcase / Re: Sanger with the new power plant
« on: September 22, 2009, 07:35:37 PM »
Thanks FL
I am pretty happy with my results. This was my first bulid and now it istimeto fix the TX

Boat Showcase / Sanger with the new power plant
« on: September 22, 2009, 08:46:38 AM »
It has been a long 8 months but the 514 is in the sanger and it is alive. This video was from a THB get together we had last weekend.
This was the first time she got wet with the new motor and i am pleased with the way it ran. My boat starts at the 2:50 mark of the video.
She is not te fastest boat on the water by any means but runs pretty good for the family boat.


Boat Showcase / Re: Sept 5th Colorado River Altair TX
« on: September 13, 2009, 09:07:21 PM »
Well jusy got home from a buddies house and we pulled the stock motor out of the sanger a droped in the 514 that i just built. have a few things left to do on the fuel system and wiring for the MSD dizzy and box but mostly done :thumbup:

Boat Showcase / Re: Sept 5th Colorado River Altair TX
« on: September 11, 2009, 07:03:41 AM »
Awsome fockin pics !


Pages: [1] 2 3 ... 6


SMFPacks CMS 1.0.3 © 2021