Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Brendella Pickle

Pages: [1] 2 3 ... 27
1
Sand / Re: lets get the sand talk started
« on: November 01, 2013, 08:39:22 AM »
we usually camp between was 10 and 14. so im sure we will be over there. But i hit the drags every night. I will cruise around gecko to see if i can see your car. Is taht thing on airbags or does it just not have shocks installed right now? anyway looks like a great fun car. easy to get in and out of.

i will have my buggy and the wife will be in her red rhino.

It has Air Bags all the way around. So far I really like it! Rides great.
Tony, we will be at the drags each day too, both cars should be easy to spot!

2
Sand / Re: lets get the sand talk started
« on: October 31, 2013, 11:24:58 AM »
We will be at Glamis for Tday (Saturday before through Sunday after). Where will everybody be camped? We will be in Gecko. I know what Tony's car looks like and could pick it out of a crowd. What about everyone elses? Here's a pic of my ride...

3
Miscellaneous / Spam / Re: Sand Rail / Buggy Parts Garage Sale
« on: October 22, 2013, 06:48:44 AM »
Sold a few parts

4
Miscellaneous / Spam / Re: Sand Rail / Buggy Parts Garage Sale
« on: October 14, 2013, 06:25:29 PM »
Is the stinger a flange type or 4 to 1 collector?

Sent from my DROID RAZR using SoCalJetBoats mobile app
4 into 1 trimil

5
Miscellaneous / Spam / Sand Rail / Buggy Parts Garage Sale
« on: October 14, 2013, 07:49:02 AM »
Guys, I'm selling some parts...
For those of you who need to put in your 2 cents about my parts, please don't. If you are interested Reply to the post or PM me.

Black Crow 3" 4 point seat belts - 2 sets $70

Gray Crow 2" 5 point seat belts - 2 sets $70

Trimil stinger - $10

Muffler - $15

Brand new CNC cutting brake - SOLD

Funco Dick Cepek box lights - $25 pair

Brand new 28mm torsion bars $100

Chenowth 2 seat chassis: has neal pedals, boxed rear arms (stock x 1"), chromolly stubs for 930, Thuing brakes, link pin beam (w/ new leafs & link pins), Chromolly tie rods for rack, set up for VW x 002, fully tabbed, chromolly torsion housing w/ sway away center, 26mm torsions... $1300

Fox position sensitive bypasses, 12" stroke - $300

Brand new Fox shocks for link pin beam w/ stock arms and towers - $225

Saco rack (rebuilt) - SOLD

Setrab oil cooler - SOLD

Hella lights (1 has cracked lens) - $40 pair

Polished spindle mounts w/ 6.70 implements (wheels have new bearings) - SOLD

6
Sand / Re: Anybody looking for a whole Sand Car???
« on: September 06, 2013, 07:44:54 PM »
It's hard to get what you have in it.  It's the same way with boats.  Just because you have 10k don't mean you will get that.  If I was to sale my car I would not get nothing out that I have in it.  Trust me you will sit on it or take a lost.


Sent from my iPhone using SoCalJetBoats mobile app

Thanks for everybody's $.02.

7
Sand / Re: Anybody looking for a whole Sand Car???
« on: September 06, 2013, 04:55:42 PM »
its hard to sell a car right now. There are a lot of nice full travel cars on the market in the 10-15k range. You might be best off parting it out or if you really want out of it just fire sale it. I have 13k into my car and i would be lucky to get 5 out of it just cause the market is full of bigger travel cars right now.

Yep, I'm not broke so I'll just wait till it sells. Unless someone wants me to take it apart for around the same price lol.

8
Sand / Re: Anybody looking for a whole Sand Car???
« on: September 06, 2013, 08:05:48 AM »
.

9
Sand / Anybody looking for a whole Sand Car???
« on: September 06, 2013, 06:32:48 AM »
.

10
Sand / Re: VW Transaxle FML
« on: August 30, 2013, 06:31:41 AM »
Bike in the sand is the best pulling geez on your body ripping around a bowl that's better than in any buggy


Sent from my iPhone using SoCalJetBoats

Said like a guy with no buggy!

11
Sand / Re: Anybody need any Buggy parts?
« on: August 21, 2013, 01:26:36 PM »


How it sits right now.
Its has a stock front beam and steering, solid shortened pan, stock rear end, with Fresh close ratio swing axel trans.

what i have
Turbo 1915, new clutch, pressure plate, and flywheel, 3 inch body lift, BTR rims with micky rubbers, and a stock manx roll bar, 15 gallon spun gast tank, stock pedal assembly, 3x3 trailing arms with hubs, and a full wiring harness

what i need
seats, roll cage, extended beam with 10 inch towers, IRS trans, 930 cvs, axels, steering column, lights, and other misc stuff to finish it

if anyone has parts i can use to finish this thing i am interested. I am hoping to take this thing to glamis with us for thanksgiving weekend. It will most likely be running on the swing axel rear, i am not going to do that conversions until i have all the parts. but anyway if you have something that might be usefull for this hit me up.
Quote
Tony. it may be beneficial for you to buy the whole car (maybe minus motor) and use nearly everything... Or mount your body right on the car

12
Sand / Re: Anybody need any Buggy parts?
« on: August 21, 2013, 11:23:11 AM »
ya just thougth about that. I thought i was going to need the whole thing but i have 3x3s with hubs. and if i use 3x3s im pretty sure i need a longer axel right? and with 200hp or so i am probably going to want aftermarket axels. so i guess i need just the trans and if you have 930 cv's. if not i will just buy some.

so
Trans only and black and red seats

maybe those coil over shocks. Were those meant for a front beam with 10 inch towers? thats about all i can fit under the body of the manx. My final goal is to have the manx as a full coil over car.

Tony, are you building her car from scratch?

13
Sand / Re: Anybody need any Buggy parts?
« on: August 20, 2013, 09:38:12 AM »
those seats would work. what you want for the trans hub to hub and the black and red seats

What do you mean, Hub to Hub? Arms, springplates, torsion bars, brakes, stubs cv's, axles, trans?

14
Sand / Re: Anybody need any Buggy parts?
« on: August 20, 2013, 08:12:21 AM »
I'm not sure on the brand but they were 150 each. They work great. It's a euro beam light it's a cross between flood and spot.

I guess what I need is an
IRS Trans
Wider front beam with 10 inch towers
Coil overs all around
Suspension seats that will fit in a Manx


Sent from my iPhone using SoCalJetBoats mobile app

The car above has a 002 (stock used) trans w/ 930 flanges
The Beard suspension seats I have for sale are the black and red ones in the buggy pictured...

15
Sand / Re: Anybody need any Buggy parts?
« on: August 19, 2013, 05:17:45 PM »
iam also looking for a front end. Im building a manx for the wife and i want it to be a coil over car. she will be more happy with that. Plus i have a turbo 1915 going in it so it needs a little better suspension than stock.

I have 3x3 arms with hubs but i am needing the rest of the IRS parts. a good or (rebuildable) trans, axels, cvs. I have a good swing axle trans that was just redone by transaxle engineering with close ratio gears. I am looking to trade that for some irs parts as well.

Tony, figure out what you need exactly and we'll work out a price

And what brand are those lights?

16
Sand / Re: Anybody need any Buggy parts?
« on: August 19, 2013, 01:58:38 PM »
I have no problem selling the chassis with or without any of the parts...

Tony, PM me about the other stuff and send me some pics of the lights... What brand too

17
Sand / Anybody need any Buggy parts?
« on: August 19, 2013, 07:12:02 AM »
I have a long list of VW off road, sandrail, sand rail, bajabug, Baja bug parts see

 Brand new Fox 2.0 10" travel coilover shocks with .875" (7/8") shafts SOLD

 28MM torsion bars 26-9/16" long $125

 Stock, plated rear IRS arms w/ new bushings $125

 Front spindle mount aluminum wheels w/ smoothee tires (need love) SOLD

 Pair highback fiberglass seats w/ tweed covers $100

 Never started 1915cc VW engine w/ single weber (built by Steve Downing) $2200

 Coleman Powermate generator pulse 1850 SOLD (has leaky fuel line, missing part of the cover)

 Pair Beard seats low back, low sides $250

 Sheet metal rear arms stock width x 1" longer $250

 Most parts are on 95% complete car... will sell or trade car whole as well

 Possible trades for other offroad items... I am looking for 5 or more matching HID off road lights (preferably 4"), double row LED light bar 38"-40", also looking for a 40"-42" gray suspension bench seat, 12"-14" bypasses...

 I have more items... If you are looking for something ask

18
Sand / Re: Well pulled the buggy out of trailer
« on: August 16, 2013, 08:42:22 AM »
That is a really nice car. I was in the process of building another car but just ran out of interest since I was going through a custody battle for my daughter. I was building an old johnny speed and chrome 122" midengine car with a 2276 dual 48idas. Well the chassis was almost done and then I stopped. I would love to get back to the sand. Just curious what you would sell the car for minus motor?

Sent from my SAMSUNG-SGH-I747 using SoCalJetBoats mobile app

Beav, shoot me a pm with an offer...

19
Sand / Re: Well pulled the buggy out of trailer
« on: August 16, 2013, 07:03:51 AM »
Is it a four seater what would you want with out the motor

Chassis is technically a 2+2 however I have it set up as a 2 seat car. I would sell it minus whatever you don't want. PM me an offer.

20
Sand / Re: Well pulled the buggy out of trailer
« on: August 16, 2013, 06:52:43 AM »
Most of the parts I have to sell would be coming from a near complete buggy part out... Would rather sell the whole buggy for a fair price if anyone is interested.
Chenowth frame
brand new 1915 engine built by Steve Downing
Brand new fox shocks on front, front suspension completely redone (new link pins, springs, seals, etc)
Saco rack, Chromolly tie rods
Beard seats
Used stock bus 002 trans
930 cv's (complete prepped with axles)
Custom rear arms (sheet metal, stock width x 1" longer) w/ durablue stub axles
Fox speed sensitive bypass rear shocks (old school)
Setrab oil cooler
lightened thing drums
Paddles shown would not be included (but I have another set that could be)
Everything is very well built...

21
Sand / Re: Well pulled the buggy out of trailer
« on: August 15, 2013, 09:36:56 AM »
What's your price I may have somebody interested?

PM sent

22
Sand / Re: Well pulled the buggy out of trailer
« on: August 15, 2013, 09:23:20 AM »
No springs

23
Sand / Re: Well pulled the buggy out of trailer
« on: August 15, 2013, 09:21:15 AM »
Tell me more about these coilovers.

Brand new never used Fox 2.0 10" travel with 7/8" shafts w/ res SHOCKS ARE SOLD

24
Sand / Re: Well pulled the buggy out of trailer
« on: August 15, 2013, 08:20:35 AM »
I'm good for meeting up at either place, Glamis or Dumont...

If anyone is looking for parts I have a ton of new stuff

Brand new never started 1915 w/ counterweighted crank and single weber
Fox coilovers
seats
fox non coilovers
sand wheels & tires

25
Boats For Sale / Re: 1979 Ranger Jet Boat Open Bow
« on: May 06, 2013, 11:06:45 AM »
This is a great looking boat guys! Pump was sent to panther for factory rebuild and has maybe 2 hours on it since then. Worth taking a look if you are in the market.

Pages: [1] 2 3 ... 27

Website Security Test
Powered by EzPortal

Website Security Test