Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 76Hondo

Pages: [1] 2
1
Engines / Engine Parts For Sale / Re: BBC parts needed
« on: March 08, 2016, 08:43:19 AM »
Set of 16 lifters/dog bones, valley retainer that will be a direct fit for gen 6 and heads 250

2
Engines / Engine Parts For Sale / Re: BBC parts needed
« on: March 08, 2016, 07:18:18 AM »
Yep then you should use that gen 6 454 that's a nice motor to start with. I have gen 6 heads at home and lifters from factory gen 6 502 with dog bones. I'll sell the stuff cheep

3
Engines / Engine Parts For Sale / Re: BBC parts needed
« on: March 08, 2016, 05:36:55 AM »
I appreciate all the help gentlemen.
Since I'm not up on what parts are interchangeable and what isn't, and also not knowing what the existing internals are, I think my best bet is to leave this one be and have him find another drop-in ready engine. Maybe later on down the road tear it down, see what it has and build it, if I can get the long block for the right price.

$500 fair for a block with rotating assembly?

Vortec heads are horrible. They need extensive work to make any decent HP. Just like 049-781 you'll be into them 1500 real quick. Just like I did with mine.

4
Engines / Engine Parts For Sale / Re: BBC parts needed
« on: March 08, 2016, 05:34:34 AM »
I appreciate all the help gentlemen.
Since I'm not up on what parts are interchangeable and what isn't, and also not knowing what the existing internals are, I think my best bet is to leave this one be and have him find another drop-in ready engine. Maybe later on down the road tear it down, see what it has and build it, if I can get the long block for the right price.

$500 fair for a block with rotating assembly?

I have a two bolt block with arp main cap bolts, eagle forged crank and eagle I beam rods. Needs rebuild.

5
Engines / Engine Parts For Sale / Re: BBC parts needed
« on: March 08, 2016, 05:32:10 AM »
I also have a set of small ovals that came off a GM CRATE HT502 mark 6 motor. With the hyd roller cam for carbureted Motor made 380hp and 560ftlbs

6
Engines / Engine Parts For Sale / Re: BBC parts needed
« on: March 08, 2016, 05:29:26 AM »
Mark 4 heads work on mark 6. Mark 5 heads are the odd ball or using mark 4 heads on mark 5 block. 049 781 are some of the best as cast ovals because they have lots of material to work with. If you looking for some cool cast heads I have them.

7
500lb/in. Came across a set of alum heads for this mill. These are very nice ovals. 1000 OBO PM BEST OFFER. Springs alone cost 380$$

8
 GM 781 cast oval port heads. 2.19/1.88 stainless back cut valves. Unshrouded the valves, short side radius blend. Opened the runners up. Decked to 114cc combustion chambers. Chromoly rocker studs, raised guide plates. Dual spring with damper for solid roller up to 650lift good for 6500rpm. Hardened spring seats on exhaust valves. New valve guides were installed where needed when they were rebuilt. Comes with trick flow chromoly head bolts. They were on a 496 for 6 trips last season. All parts were new when rebuilt. Also have single plane single 4150 carb intake ported and matched to these heads

9
Engines / Engine Parts For Sale / Re: BBC parts needed
« on: March 06, 2016, 11:12:11 AM »
I have a nice set of 781's bolt on ready. All the good stuff to make decent hp

10
Events / Re: Omar getting it on at the Tom Papp Memorial 2011
« on: January 01, 2012, 08:18:28 PM »
Yea would be a cool pic if you wernt hauling ass in a NO WAKE zone!

11
SOLD to the original owners friend, said to be off a Daytona.

12
Boats For Sale / Re: Craigslist & ebay boats
« on: December 17, 2011, 01:21:29 PM »
Good pics in the listing, I'm out at parket right now doing some riding but my phone doesn't let me add attachments boat is nice I'll post pics from the laptop later. [ Attachment Invalid Or Does Not Exist ]

13
Boats For Sale / Re: Craigslist & ebay boats
« on: December 17, 2011, 11:05:26 AM »
I Dont know what your talking about? Ripped on all summer, if it was junk i wouldn't have bought it, I checked engine block numbers and head cast numbers, motor and jet are super fresh, I can tell the motor is tuned and make good hp. Maybe u go out and buy junk that's been ripped on....lol ur funny.

14
nope not off 418 it was off 076 had a C&J engineering/fuel systems stickers on it, he took them off before i bought it. have a pic with numbers though

15
bought this from a guy a couple weeks ago, was going to use it but going different direction, scoop is composite has a standard flat tray that was setup for single dominator and had a crack init. the guy i bought it from tried to fix it with a street sign and some 5/16 bolts (lol). trays good just need a new bottom made to pop rivet to it or weld it together ither way definetly a good deal and way cheeper than buying a new tray(unless u have a brake and can fab one in 20min). I can repair the tray correctly for an extra fee if need be for the new owner, this way it will fit a 4150 or a 4500 series carb... the story i was given when i bought this scoop is that it was on a record breaking CP or some type of gullwing, anyone ever seen this scoop? anyways for sale, nice paint, scoop is awsome quality mold some type of composite, nice pinstriping, has a few spider cracks and what i belive is a bird diflector mount on top? 160.00firm! plus ride.
So Cal local 951 214 0460. Koby

16
Boats For Sale / Re: Craigslist & ebay boats
« on: December 16, 2011, 08:00:49 AM »
http://phoenix.craigslist.org/nph/boa/2711119477.html

Someone needs to jump on this! Looks super clean! 77 hallett for $7k...


Sent while on the run, or sitting at work bored

Picked this Hallet up, nice ride, can't wait to get it in the water, super clean hull, nice trailer, some where around 600hp. Nice split bowl Berkeley with custom cut impeller and custom made loader, did a 700mile turn around trip got a smoking deal definitely didn't pay what they were asking but it's not as nice as what they list in add but still a 8.5 out of 10 they make it sound super super cherry. I'm happy that's what counts

17
Boats For Sale / Re: 74 CHALLENGER JETBOAT 600HP BBC more pics
« on: December 11, 2011, 07:03:38 PM »
That still a jacuzzi intake?

18
Boats For Sale / Re: 1976 hondo jet for sale make offer
« on: December 11, 2011, 06:43:25 PM »
SOLD thanks!

19
Boats For Sale / Re: 18ft Challenger jet boat
« on: December 11, 2011, 06:18:42 PM »
Pm sent

20
Boats For Sale / Re: 1976 hondo jet for sale make offer
« on: November 29, 2011, 07:15:40 PM »
lol nope all HONDO. including the original dash emblem. wow market must be bad to not get any bites. well looks like it will have to go during the season. im at my bottom dollar.

21
Boats For Sale / Re: 1976 hondo jet for sale make offer
« on: November 28, 2011, 05:48:41 PM »
6k turn key, fast, clean, reliable gaurenteed!

22
Boats For Sale / Re: 1976 hondo jet for sale make offer
« on: November 28, 2011, 05:46:04 PM »
nice boat, needs a new home, turn key boat has all the luxuries, go fast, stereo for floatin, all high quality work, if some one wanted to invest time into the paint the boat would be perfect.

23
Boats For Sale / Re: 1976 hondo jet for sale make offer
« on: November 28, 2011, 05:42:36 PM »
6k takes it away

24
Boats For Sale / Re: 1976 hondo jet for sale make offer
« on: November 28, 2011, 05:40:24 PM »

25
Random Boat Parts For Sale / Re: parts
« on: November 16, 2011, 07:34:52 PM »
have pics of the torker manifold?

Pages: [1] 2

SMFPacks CMS 1.0.3 © 2020