Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - $HAG NA$TY

Pages: [1]
1
Engine Mechanical / Electrical / BBF 460/Cam options
« on: February 12, 2014, 08:44:08 PM »
To make a long story short I tore down my 460 in my boat at the end of summer and found I had a few ovaled cylinders also a leaky valves after a good 12 yrs of use it was a good motor. My initial plan was to have a 557 built but funds are not allowing as of now and the other day I picked up a fresh from machine shop .30 over semi dished pistons stock OEM rods/crank for dirt cheap $500 (guy decided he wants a Chevy so I win) but for the 557 I purchased a wiand dual t-ram with 750's on top (used to have a single offy t-ram with 850) also I have a set of procomp aluminum heads I purchased from a fellow boater, which were bare heads when he got them but had stainless Manley valves and have springs that he says are capable of up to 700 lift.. (I know some don't like procomp but have been told they are a good head to purchase bare) anyway.. I am going to call lunati tomorrow and try to get some kinda custom grind to match what I have going on. Figured I'd ask here first because, well its for a jet boat! LOL if anyone has input like what cams they have used I'm pointing more toward hydraulic flat rapper w/ roller rockers.. thanks in advance!

Sent from my ADR6400L using SoCalJetBoats mobile app


2
Engine Mechanical / Electrical / A few pics from this summer.
« on: September 27, 2013, 08:40:54 PM »
Had a blast this summer and met some new friends.. TX isn't as bad as I thought.. glad I'm here!!

Sent from my ADR6400L using SoCalJetBoats mobile app


3
Engine Mechanical / Electrical / New Dooley air scoops?
« on: September 27, 2013, 08:12:47 PM »
Anyone running these scoops yet? Do you have pics? Thinking about getting one for my new dual carb t-ram setup! 8)

Sent from my ADR6400L using SoCalJetBoats mobile app


4
Jet Pumps / Reverse cable seal question.
« on: June 24, 2013, 11:25:14 PM »
So I got a reverse cable seal kit but. I don't see how it goes on? :o Am I missing something here? If anyone has knowledge on this or has done it before please help! Lol any info will be greatly appreciated O0

Sent from my LG-VS700 using SoCalJetBoats mobile app


5
Hulls / 71 weiman
« on: June 19, 2013, 10:48:50 PM »
This is my Grandpas old boat that my Dad had grew up in. Mostly boating at San Antonio and nacimento. (Grandpa lives less than a mile from San Antonio)  anyway he sold it a few years ago and was wondering if anyone has seen it around or if anyone on here owns it now. Would be cool to see it again.

Sent from my LG-VS700 using SoCalJetBoats mobile app


6
Engine Mechanical / Electrical / Oil pressure gauge is killing me!
« on: June 07, 2013, 07:46:37 PM »
Installed my new gauges and all work good but the oil pressure is reading 50 psi when the key is on and motor isn't running. I don't get it. I went over my wiring about 20 times. The sender is the one that came with the gauge in the box.. I'm thinking the gauge or sender is defective:o anyone have any input or have had the same issue? Thanks in advance!

Sent from my LG-VS700 using SoCalJetBoats mobile app


7
Interior / Carpet glue?
« on: June 07, 2013, 01:04:33 AM »
Just got my new eBay marine carpet and realized I didn't buy glue ??? I've been told by a few people to just use home depot carpet glue and that it works fine. What do you guys think? Any input will be greatly appreciated. Thanks in advance! 8)

Sent from my LG-VS700 using SoCalJetBoats mobile app


8
The No Wake Zone / Vintage Nordic badges?
« on: June 04, 2013, 11:48:56 AM »
Been looking for the oldschool Nordic badges for my 77 Nordic bubble deck. Can't find em anywhere. I don't think my boat ever had em but I just restored the boat and want to add them on!

Sent from my LG-VS700 using SoCalJetBoats mobile app


Pages: [1]

Website Security Test
Powered by EzPortal

Website Security Test