Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Rogers Hopeful

Pages: [1] 2 3 4
1
Engine Mechanical / Electrical / Header water injection question
« on: July 18, 2018, 09:37:04 PM »
I hooked up my water lines. My T-valve has a new ball and spring but for some reason my passenger side header is getting way more water then the drivers side. It looked like it was coming out of the weep holes. I had about a 1/4 of water next to the stringer and it had only been idling for a couple mins. The other side was almost dry.


Sent from my iPhone using SoCal Jet Boats mobile app

2
The No Wake Zone / 455 Olds alternator Bracket
« on: April 30, 2018, 03:56:22 PM »
been trying to figure out a way to mount my alternator on my olds.  I know from previous boats one bolts to the head but the lower has got me.  my last boat had a spot on the motor mount but the mounts on this boat doesnt have it.  nobody seems to sell the olds bracket.  any ideas or pictures of your set ups?

3
The No Wake Zone / Shake at speed
« on: April 21, 2018, 10:13:34 PM »
I was running down the river at wide open throttle and I think my pump sucked air. I got a bad shake on flat water. Was it cavitation?  It ran fine after I let off of the throttle a little. Just want to see if I should look further into this. Other then this it ran awesome on Friday.

4
Engine Mechanical / Electrical / 455 olds alternator bracket
« on: March 25, 2018, 10:04:49 AM »
Anyone know where I can find an alternator bracket for a 455 olds?  Or can I just use one from a BBC?

Thank you

5
Engines / Engine Parts For Sale / SBC 350
« on: March 13, 2018, 01:49:58 PM »
I have the small block I took out of my boat. It's a 350. The guy I bought it from said 325-350 horsepower. One head had a valve guide come loose.  Looking to get $800 obo


Sent from my iPhone using SoCal Jet Boats mobile app

6
Engine Mechanical / Electrical / Head work
« on: September 10, 2017, 08:44:04 PM »
Where is a good place in the Long Beach area to get some heads gone thru. I have an extra SBC that needs the heads done.


Sent from my iPhone using SoCal Jet Boats mobile app

7
Boat Racing / Billet carb
« on: June 21, 2017, 08:57:08 PM »
This thing is sweet!!


Sent from my iPhone using SoCal Jet Boats mobile app

8
The No Wake Zone / SBC headers
« on: May 17, 2017, 05:45:13 PM »
Anybody have any laying around that are in good condition?


Sent from my iPhone using SoCal Jet Boats mobile app

9
The No Wake Zone / Logs or headers
« on: April 28, 2017, 04:53:36 PM »
I currently have logs that go to OT pipes how much would I gain if I went to headers.   This is my current set up. I have a SBC making 550 HP


Sent from my iPhone using SoCal Jet Boats mobile app

10
The No Wake Zone / SCJB app
« on: March 10, 2017, 01:38:25 PM »
Is the SCJB APP for apple coming out soon?


Dreaming of the river

11
Engines / Engine Parts For Sale / WTB SBC headers
« on: February 24, 2017, 12:43:21 PM »
Anybody have a good set?


Dreaming of the river

12
Engines / Engine Parts For Sale / 350sbc
« on: February 24, 2017, 12:13:31 PM »
Has a bad head (valve guide I believe). Decided to build a new motor.  Just seeing what I can get for it. If I can't get enough I'll just get the heads redone and then resell. Has edelbrock performer intake. Intake to pan


Dreaming of the river

13
Cars / Automobiles For Sale / 2005 Ford Excursion 4X4 Diesel
« on: February 21, 2017, 03:34:57 PM »
My parents are selling their excursion. Has coolant filter. External oil filter. Heads were sent to a machine shop and checked for warping (was straight). ARP head studs. Turbo was rebuilt at the same time I believe. Bulletproof diesel egr cooler.
All work was done at Buds Diesel in Orange County. Oil changed every 3000-4000 miles with rotella and rev x added to fuel and oil.

143,000 miles

Pioneer head unit.

Small lift kit

$20,000 OBO

14
Engine Mechanical / Electrical / Repowering!
« on: September 02, 2016, 10:03:20 AM »
well the small block pushed a valve guide and since i have the means to repower I went to a drag racing buddy of mine to build me a 434 SBC.  He's expecting 550-600HP (old motor was 325HP trying to push a SS A impeller).  And its done.  All new parts from the pan up.  The 16'6" rogers should scoot pretty good now!

15
Miscellaneous / Spam / Sand tires
« on: July 17, 2016, 02:23:57 PM »
Came off a 2004 Kawasaki 400 quad
$100

Dreaming of the river

16
Engines / Engine Parts For Sale / Mounts and exhaust
« on: July 17, 2016, 02:22:18 PM »
455 olds. $175 takes it all


Dreaming of the river

17
Cars / Automobiles For Sale / Honda NC700X
« on: October 02, 2015, 06:00:33 PM »
Honda NC700X. Good little bike. It's considered an adventure bike. I averaged  65mpg. Has a storage compartment that can hold a full face helmet. 4082 miles. Asking $5600.


Dreaming of the river

18
Random Boat Parts For Sale / Olds Logs and snails
« on: February 15, 2015, 02:11:46 PM »
good condition.  went with OT headers.  Best offer

19
Fabrication / 3.5" tube bender
« on: October 30, 2014, 11:33:14 PM »
I have a 3.5" exhaust on my truck and want to get it routed to exit in front of the rear tire because I can't have my full size spare under the bed because it's got 33" tire on it and would rub the exhaust. Anyone have anything to bend 3.5" pipe or know of a muffler shop that has a bender that can handle that size pipe?  I have called a few places and the largest that can handle is 3".   Thank you

I'm in the lakewood/long beach area

Dreaming of the river

20
Cars / Automobiles For Sale / WTS***2006 F150 supercrew
« on: February 28, 2014, 09:30:32 PM »
Trying to see if there is any interest in my truck.
2006 F150 SuperCrew 5.4L
102400 miles. And going up. Daily driver
Pioneer head unit w/backup camera
2.5" leveling kit up front and add a leaf in the rear
33" tires
Wet okole seat covers
Tinted windows
Carpet kit in the bed
Camper shell.

$13,000






Dreaming of the river

21
The No Wake Zone / A new venture
« on: September 06, 2013, 10:32:47 AM »
Well I am leaving to go to Delaware for 2 months to train to be an Assistant Conductor with Amtrak.  I am outta here on 9/14/13 but I should be based out of Los Angeles when I get back!!!   ;D 8)

22
Engine Mechanical / Electrical / Problems starting when warm
« on: July 24, 2013, 06:56:03 PM »
So I got the new motor in a few months ago and finally got to take it out on monday.  Ran great had 79psi oil pressure while at speed and 60ish at idle.  Run up to the 2nd island north of big river sat there had a few cold ones and went to leave and it was hard to start.  Had to turn it over while pumping the peddle for a bit.7-10 secs.  the fuel was from april which might be part of the problem.  went up to the cove sat there for a bit and same problem.  it started a bit sooner than first time still was hard to start.  cruised all the way back to the park.  RPM's never above 4000rpm.  cruised most of the way at 3000rpm's and H2O temp was right around 110*.  Fuel issue?  I have a brand new filter on it.

23
The No Wake Zone / Big River: anchor missing
« on: June 16, 2013, 08:51:55 AM »
Did anyone pick up an anchor yesterday?  Or see someone take a lead brick? My parents came back from the cove it was gone. I doubt it was anyone here but if you saw anything let me know.


SCJBM

24
The No Wake Zone / New commute ride
« on: June 14, 2013, 04:38:35 PM »
Picked this up today.  Runs great!!!  NC700X

25
Random Boat Parts For Sale / Few thing for sale
« on: April 27, 2013, 11:05:33 AM »
Holley Blue w/ Regulator used for about 10 trips.  decided to go with a manual pump.  $100 obo

Lecarra wood steering wheel with hub adaptor- SOLD


K and N Velosity stack-  $50 obo


Pages: [1] 2 3 4

Website Security Test
Powered by EzPortal

Null

Website Security Test