Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Mrblueeyesnick

Pages: [1]
1
Topock / Laughlin / Laughlin April 21-23
« on: April 10, 2017, 01:42:02 PM »
I'm going to be in Laughlin the weekend of the 21st was wondering if anyone is going to be out there. I will be in my 18' Nordic bubble deck. If you see me stop by I'll have a cold one for you.


Sent from my garage drinking a cold beer!!!

2
Random Boat Parts For Sale / Looking for fuel fills
« on: May 02, 2016, 03:23:52 PM »
While I was out this last weekend I had a few cans of gas leftover and my friend was putting one in the boat and dropped the can and broke my flip cap. Was wondering what people had out there. I don't care if they are flip or flush mount, just want to see what's out there. Thanks


Sent from my garage drinking a cold beer!!!

3
The Parker Strip / Parker 4/29-5/1
« on: April 24, 2016, 09:57:26 PM »
I am going to be in Parker this weekend and was wondering if anyone else was going to be out, I will be staying at the park just up from emerald cover. If you see the red and white Nordic stop by and say what's up.


Sent from my garage drinking a cold beer!!!

4
Fabrication / Welding
« on: November 06, 2015, 11:21:11 PM »
Just throwing it out there, if any one needs any welding done. I am looking to make a few bucks to try and help me get by until I can get back to work. I can't weld aluminum due to the fact I don't have an ac machine, but I can do carbon steel and stainless steel. I know this is not boat related and if it's not acceptable Brad feel free to delete it. I'm located in San Jacinto if anyone is interested. Thanks


Sent from my garage drinking a cold beer!!!

5
Gelcoat / Paint / Fireberglass Repair / Filling in rub rail holes
« on: September 21, 2015, 01:27:43 AM »
I got home today from the Southwind regatta and noticed that a few screws that were holding the rub rail were coming out. After further investigation I noticed that the section was capped. I took the rest of the rub rail off and the whole thing is capped. What I want to know what would be the best way to fill in all the holes where the screws were? Thanks for your help in advance.


Sent from my garage drinking a cold beer!!!

6
Jet Pumps / Looking for a reverse bucket
« on: May 31, 2015, 11:14:03 AM »
I'm looking for a reverse bucket like the one pictured. Mine broke and trying to save some cost and not have to buy a new pd right now, if anyone has one let me know. Thanks


Sent from my garage drinking a cold PBR

7
WTB / Xs xtreme loader scoop
« on: May 20, 2015, 07:32:42 PM »
I'm looking for a xs xtreme loader if anyone has one they don't need anymore. It's what was recommended for my setup.


Sent from my garage drinking a cold PBR

8
I have a set of elite series valve covers for a bbc. $100 obo


Sent from my garage drinking a cold PBR

9
Miscellaneous / Spam / Miller welding machine
« on: March 13, 2015, 11:02:44 PM »
I have a Miller Dimension 400 3 phase welding machine. I am just trying to sell it to help fund my boat. I can't use it because I don't have 3 phase. It's in good condition. Asking $1000 obo. I know it's not a boat but just wondering if anyone need or knows someone who needs this machine.


Sent from my garage drinking a cold PBR

10
Projects / '79 Nordic bubble deck
« on: February 21, 2015, 07:00:57 PM »
I figured that now that I am getting into my build I would star a thread. Over the lat couple months I have pretty much striped my Nordic back to a bear hull. I getting ready to start putting new stringers in. I'm probably going to start tomorrow sanding where the existing stringers were and start prepping for the new ones.


Sent from my iPad using SoCal Jet Boats

11
The No Wake Zone / Super Bowl
« on: February 01, 2015, 12:53:57 PM »
I know it's not a boat topic but who is everyone cheering for in today's game? I'm going for the Patriots because Seattle embarrassed my Broncos last year.


Sent from my iPad using SoCal Jet Boats

12
Jet Pumps / Nozzle question???
« on: January 31, 2015, 05:52:36 PM »
I am getting my place diverter ready to put back together and I was looking at where the nozzle o-ring goes. I know on most there is a groove that it goes in to but mine doesn't have it. Where does it go and how do I put it on???


Sent from my iPad using SoCal Jet Boats

13
Random Boat Parts For Sale / Dominator jet for sale
« on: January 30, 2015, 02:04:01 PM »
Dominator mb 12s for sale. Serial number 2902. It was in my boat but I am changing it out for a berkeley. I have all the parts. Needs to be gone through. $300. If interested call Nick at (951)203-1913.


Sent from my iPad using SoCal Jet Boats

14
Jet Pumps / Jet question
« on: January 26, 2015, 11:07:13 PM »
I was wondering what the difference was between my berkeley jb and my dominator my-12s. Is there any advantage to either one. I was told that they were basically the same. I want to know what everybody thinks. Thanks guys. I just want to know what one to have rebuilt and what one to put in my boat.


Sent from my iPad using SoCal Jet Boats

15
Gelcoat / Paint / Fireberglass Repair / Stringer question
« on: November 16, 2014, 01:05:12 AM »
What is the best way to get my old stringers out so that I can replace them. What is the most efficient way to accomplish this task. The stringers in my boat have so many holes and plugs in them it looks like moldy Swiss cheese.


Sent from my iPad using SoCal Jet Boats

16
Projects / Machine work
« on: November 06, 2014, 08:08:53 PM »
I am looking for some advise on where to take my 454 bbc and heads to have them fluxed and machined. I live in San Jacinto and I was wondering if there was anywhere local.


Sent from my iPad using SoCal Jet Boats

17
Gelcoat / Paint / Fireberglass Repair / Paint for jet
« on: July 08, 2014, 09:01:35 PM »
I am wanting to rep ain't my jet. What kind of paint should I use for it?


Sent from my iPad using SoCal Jet Boats

18
Jet Pumps / Berkeley jet
« on: June 26, 2014, 08:52:59 PM »
I have a berkley 12jb and I was looking to have it rebuilt. I was going to buy an overhaul kit but I am going to need some directions on how to do it. If anyone is around the Hemet area on the weekends or in the Barstow/Victorville area that could help me let me know. I am kinda new at this stuff. Thanks


Sent from my iPad using SoCal Jet Boats

19
The No Wake Zone / A decision to make?!?!?
« on: June 25, 2014, 09:13:53 PM »
I am in the middle of having to make a decision. The 454 that I have right now is in need of a very big very expensive rebuild and that's not taking into concentration if I have a cracked head or block. I have been searching on line for a new engine. I have found two, a Chevy 468 and a ford 460. I'm kinda bias towards fords but the Chevy is another good option. The ford has more upgrades but the Chevy is a newer rebuild. The ford I would have to get different mounts and bellhousing but that would be just about all I would have to change. Both engines are complete. I just wanted to know everyone's opinion on what you all think? Thanks everyone


Sent from my iPad using SoCal Jet Boats

20
Boat Showcase / Cheetah tunnel
« on: June 02, 2014, 07:11:15 PM »
Just out of curiosity if anyone knows anything about cheetah tunnel boats my uncle used to have one and I always loved the way they looked but I can honestly say that I have never seen another one. Just wondering what anyone can tell me about them. Here is a picture of my uncles.


Sent from my iPad using SoCal Jet Boats

21
Boat Showcase / Idea For my '79 Nordic
« on: May 25, 2014, 11:12:59 PM »
I am playing with the idea of making my boat match my truck. I'm a big hunter and I know I have never seen a boat look like this. I photo shopped my boat and made it as close to what I want. Let me know what you all think

22
Gelcoat / Paint / Fireberglass Repair / Stringer work
« on: May 18, 2014, 02:13:38 PM »
I have a '79 Nordic bubble deck and my stringers need to be replaced. I have full length stringers and I don't have the time to do it myself. Is there anyone who knows someone that does this kind of work for a reasonable price? Thanks everyone.

23
Boat Showcase / 1979 Nordic bubble deck
« on: May 18, 2014, 01:44:22 PM »
How's it going everyone I just found this page and wanted to say what's up and show my boat. It needs a little work but it's a fun toy. Thanks for looking at my project.

Pages: [1]

Powered by EzPortal
Null

anything