Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - 76Rogers

Pages: [1]
1
Projects / 1976 Rogers TR Face Lift
« on: May 13, 2019, 07:41:22 AM »
Well after finishing the final major milestone of this project, I figured now would be a good time to throw up some pictures of my progress so far. Here's my 1976 Rogers Bonneville TR that I've had for about 6 years and I've finally had the time and funds to give it the proper treatment she deserves.

2
Gelcoat / Paint / Fireberglass Repair / Transom holes
« on: April 10, 2016, 04:31:08 PM »
The through transom holes on my boat are starting to crack where they were previously filled in. Has anyone else experienced this and what's best way to fix it? I know people say they fix other cracks by grinding the cracks out with a dremel and filling them back in with a 2 part epoxy. Is this the route I should go or has anyone tried anything else?


Sent from my iPhone using SoCal Jet Boats

3
The No Wake Zone / Who's boat?
« on: November 15, 2015, 11:42:36 PM »
Does anyone know who's boat this is? I have a question about the setup of the oil catch can. Or can someone give me some more info on this specific catch can?


Sent from my iPhone using SoCal Jet Boats

4
Miscellaneous / Spam / 50 in KC HiLite light bar
« on: September 04, 2015, 12:25:42 PM »
Is anyone in the off-road community looking for a light bar? I have a 50 inch KC HiLite c-series light bar. New in box, never been used, not even mocked up. Comes with all mounting hardware and the wiring harness from KC. Looking to get $800. Located in Las Vegas.



5
Gelcoat / Paint / Fireberglass Repair / Clear coat
« on: August 10, 2015, 01:29:20 PM »
During this off season I'm putting on a couple more coats of white and most likely a clear coat. I've been browsing through a couple forums and I've seen a few people say not to clear coat underneath the water line. I know I sound like a newbie but what's the purpose of not clear coating the entire boat?



6
The No Wake Zone / Hot August Nights
« on: August 08, 2015, 09:15:58 PM »
I'm up here in Reno for the Hot August Nights weekend so I figured I might share some pictures with the car enthusiasts on here.



7
Engine Mechanical / Electrical / Water intake trouble
« on: July 30, 2015, 09:37:19 AM »
Lately I've been having some trouble with my water intake to both my headers and motor. Whenever I'm at idle, there is way too much water going into my headers and coming out of the weep holes. Thankfully there hasn't been any reversion, yet. Anyways, I adjusted my intake valve down a little, which helped the amount of water coming into the headers, but now there isn't enough water getting to my engine. I asked a buddy of mine and he said that it could be my t-valve stuck open. Any other thoughts?



8
Interior / Beede gauge
« on: July 15, 2015, 06:34:05 AM »
So my temp gauge has been cracking along the side for the longest time, and it finally broke. I think I pressed my Bessel on a little to much when I took it off to powder coat it. Anyways, I've been searching around online and I found their website. I emailed a sales rep like a week ago and haven't gotten anything back. I know that Hardin Marine distributes them, but is there any other place I can get one or any other way I can reach out to someone in sales?



9
Lake Havasu / Havasu seaweed?
« on: July 11, 2015, 05:08:20 PM »
Is anyone else running down in havasu who keeps sucking up all of this damn seaweed? I've sucked it up twice today and both times I almost over heated my engine. It's starting to become overwhelming.



10
Hulls / Rub Rail?
« on: June 15, 2015, 09:17:11 AM »
Does anyone know where I can get an aluminum rub rail from? Or if anyone has one for sale?



11
Gelcoat / Paint / Fireberglass Repair / Stress cracks?
« on: June 11, 2015, 09:53:06 AM »
I've been noticing that my hull is starting to get stress cracks where the top and the bottom of the hull were "married" but is there really anyway to prevent/hide these cracks? They don't bother me that much, but cosmetically they're an eye sore to others. I've noticed that the Rogers hulls crack in the same spot and I was wondering if anyone already took some steps to prevent/hide it.



12
Gelcoat / Paint / Fireberglass Repair / Recommendation for paint?
« on: June 08, 2015, 08:40:25 PM »
I painted my boat the end of last season, but I only threw a base coat of white on. I was going to do a couple more but I ran out of paint and it was already time for season to start. I want to throw a couple more coats on and maybe a clear coat too. Anyone recommend some good white paint? I was going to use the same paint I used for the base, but it was kind of pricey.

Pages: [1]

Null

SMFPacks CMS 1.0.3 © 2020