Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Outlawmayhem

Pages: [1]
2
Boats For Sale / Crusader for sale
« on: April 01, 2017, 10:50:29 PM »
Turn key only needs minor work.
Forward reverse cable snapped on my last trip.
And Diverter cable needs to be secured in the handle. Could possibly use an impeller change I believe it to be a c impeller could definitely use an a impeller. Also needs the alternator remounted lower.  Doesn't come with seats pictured comes with wooden buckets.

Has a 429 Ford approx 400hp runs 60mph would run 70+ with proper impeller. Has a dominator pump with berk jc bowl and manual diverter. Engine has upgraded roller rockers on dove heads and thicker pushrods. Brand new lifters. Proform 850 carb. Bassett ot headers. Has stereo but no speakers. All new wiring. Twin aluminum fuel tanks. It will be out at the opener.

5k obo very negotiable on the price. Also have a bimini top that comes with it.

Sent from my SM-G935T using SoCal Jet Boats mobile app


3
Engine Mechanical / Electrical / 460 build questions
« on: February 05, 2017, 09:19:40 PM »
Okay so I'm picking up amother 460. It's stock. I'm looking at spraying this thing with 100 shot and moving up to 200 shot max. I have a set of d3ve heads with roller rockers and a set of c8ve heads. Looking to get the most power and speed I can. It'll he going in anew 18ft miller with a setback pump with an A impeller.

Biggest question is where do I want my hp and torque at? I ran a calculator and it's coming up with torque over 1000 at 1000 rpm and about 500 to 600 hp at 5500. Kinda lost here.

Sent from my SM-G935T using SoCal Jet Boats mobile app


4
Boats For Sale / 75 miller hull
« on: February 03, 2017, 11:08:39 AM »
75 miller hull and trailer for sale.
Trailer has new bearings and tires.
Stringers seem to be okay.
Got a new hull on the way gotta go.
Pulling the motor in the next week.
850 obo


Sent from my SM-G935T using SoCal Jet Boats mobile app


5
Random Boat Parts For Sale / Parts for sale.
« on: February 03, 2017, 08:21:18 AM »
Pedal and cable $150 obo
Shifter $50
Steering wheel $40
Berkeley 12jc pump that needs rebuild $200
Berkeley 12jc rebuilt with 4 trips on it. $1000 obo
Bbf logs and snails $150obo


Sent from my SM-G935T using SoCal Jet Boats mobile app

6
Project Boats For Sale / 75 miller
« on: December 04, 2016, 09:13:06 AM »
For sale less motor $2500 or best offer. 75 miller. Berk jc pump freshly rebuilt with 4 trips on it. Has brand new Hardin marine gauges and bezels. New steering wheel. Exhaust block off plates. Great solid boat that handles chop well ran 70 with about 400hp. Needs new seats and carpet. Stringers are solid. Had a bbf in it. Trailer has all new tires and bearings.

7
Engines / Engine Parts For Sale / Nitrous setup
« on: November 24, 2016, 04:19:09 AM »
***for sale***  875 obo
Nitrous setup for dual carbs
Two plates
Two nitrous solenoids
Two fuel solenoids
Braided lines and an fittings
10 pound bottle with brand new brackets
Fuel regulator

I also have an electric fuel pump that I have to find that goes with this.

8
Lower River / Blythe 4th of July
« on: June 20, 2016, 05:25:41 PM »
I'll be in blythe the wife and kids on July 4th.  I'm headin up on Sunday morning and coming home Tuesday morning. Staying at Arizona oasis.  Anyone else gonna be out there? Where's everyone gonna he hanging out? Any tips for blythe never been there before. 

9
WTB / manual place diverter
« on: May 31, 2016, 05:34:28 PM »
looking for a manual place diverter for a berkeley 12jc anyone got one for sale or trade?

10
The Parker Strip / Parker tube float
« on: May 31, 2016, 04:01:51 PM »
Anyone heading out to Parker for the tube float on June 11th?

11
Engines / Engine Parts For Sale / Over transom S pipes
« on: April 19, 2016, 07:52:11 PM »
Have a set of over transom S pipes for log manifolds.  No idea what they're worth maybe 150? They still have a little rust but I cleaned most of it up.  I was gonna use them but I went with Bassett headers instead. 

12
Engines / Engine Parts For Sale / Bbf over transom headers
« on: April 19, 2016, 03:41:51 PM »
I have a set of bbf headers.  Bassett twisty style and a little up swept looks to have baffles in them. They're rusty and need some work done on em.  They have A few holes and needs one water bung replaced since the weld broke. No idea on the brand I can't find any markings on them. I have the water lines but have no idea if they're any good.  These came on an engine I bought but I already have a set. 

I'd like to get $200 for em located in the long Beach area. 

13
Engines / Engine Parts For Sale / Bbf parts for sale
« on: April 18, 2016, 01:53:51 AM »
Have a water pump block off plate and a bellhousing with reverse starter mount.  Make offer. 

14
Engine Mechanical / Electrical / argh cant decide on engine build...
« on: March 17, 2016, 03:11:23 PM »
I was looking at going 521 stroker...
now im leaning towards punching the cylinders out .30 changing pistons to bump up the compression.
currently building a D1ve block it has d3 heads but this motor will be getting the c9 heads off my other motor with some cleanup.
thinking h beam rods, stock crank, forged pistons? not sure where the compression would be on a d1 block with c9 heads.
starting compression would determine my piston selection. id like to keep it in the 10:1 to 11:1 range and run on 91 octane possibly running a booster if needed.

looking at victor 460 intake.
with this cam kit http://www.summitracing.com/parts/cca-k34-241-5
and for the fun of it lets top it all off with a 150 shot.

still trying to figure out what pistons to use.

15
Engine Mechanical / Electrical / Bassett header coating?
« on: March 17, 2016, 04:29:41 AM »
Okay so I picked up an engine yesterday morning.  Came with a set of bassett headers.  They're pretty rusty need some welds in a couple places.  Where would be a good place to have them repaired and ceramic coated?

16
Jet Pumps / Droop and ride plate combo?
« on: March 04, 2016, 09:22:33 PM »
Okay so I'm picking up a split bowl for the jc on my miller.  Was looking at droop snoots and found one with a ride plate attached.  Is this worth it? I know it's not a full true ride plate but would it make a difference on my boat with a basically stock motor. 

I was looking at running the droop with the plate with a hyd diverter and maybe a bowl stuffer. 

17
Engine Mechanical / Electrical / Opinions on 521 build
« on: March 02, 2016, 10:34:07 PM »
Tossing around the idea of building a 514 or 521 out of a 460 throughout the next year. Was looking at a few of the scat packages.  I don't plan on twisting the motor any farther than 5500 rpm if that. 

I'd be running c9ve heads with larger valves installed as well as port and Polish.  More than likely a weiand stealth intake with an 850 or larger carb.  Not sure on the cam yet. I'd be looking into an msd ignition and box for it as well.  Currently running a set of bassett headers dry. 

What do you think? Good build plan so far? Any opinions or recommendations?

18
Gelcoat / Paint / Fireberglass Repair / 75 Miller decal?
« on: February 19, 2016, 05:01:20 PM »
Has anyone seen the decal or have a picture of one? I contacted miller custom boats and awaiting a reply.  I'd have em made if I had to I'd really like to put the decals back on. 

19
Boat Racing / Quick question about comp jet
« on: February 10, 2016, 09:51:39 PM »
I'm hoping I might be able to make it in for a race this year. Really making the push as my grandfather is sick and he used to run Superstocks back in the 70s.  It's something I always wanted to do while he was alive. 

So my question is how much power is needed to even keep up? I know I don't have the money to win but I'm happy coming in dead last.  It's all for fun.  I just don't want to be in the way.  Thanks in advance.

20
Random Boat Parts For Sale / looking for a bbf ski tow
« on: November 26, 2015, 05:39:39 PM »
i switched over to a dual quad tunnel ram on my 460 and now i dont have a ski tow that will work for it. anyone got one that they would be willing to sell me?

21
Engine Mechanical / Electrical / 460 twin turbo??
« on: November 23, 2015, 11:30:03 PM »
Alright so just been thinking about what I want to do to the boat this winter and I'm thinking twin gt45 turbos with my offy tunnel ram with blow thru carbs obviously. Now here's where I run into a problem. Where in the world do I find headers for this kind of set up? Or is it something that has to be built?

22
Gelcoat / Paint / Fireberglass Repair / Rub rail
« on: August 16, 2015, 10:00:30 PM »
Anyone have any small sections of silver. .625 (5/8) rub rail like what I have pictured.  My boat is missing two small sections about 8 inches long.  Any condition will do.  Thanks

23
Boat Racing / comp jet questions.
« on: August 09, 2015, 07:47:04 PM »
anyone on her race in the comp jet class? wanting to get into it in the next couple of years.
i was reading up on the rules and i saw that stringers have to be visible for inspection. does this mean that no carpet can be in the boat?
also what safety gear is required? i know obviously a helmet and life jacket but is there any special type that is needed? and how does everyone bolt the seat to the stringers? thank you in advance.

24
Engine Mechanical / Electrical / Fuel problem?
« on: August 08, 2015, 12:31:08 AM »
I got a 460 in my boat and I'm having some trouble with the carb. It's a holley I believe a 750 with mechanical secondaries.  It won't start unless I use starting fluid but after that it idles fine.  If I give it throttle it stalls but if I do it slowly it runs fine.  Could it be the float level?

25
Engine Mechanical / Electrical / 460 no spark
« on: June 27, 2015, 06:32:18 PM »
Okay so I just bought a 75 Miller with a 460 but I've got no spark. I've replaced the coil and the condenser already and new plug wires.  I've bypassed the ballast resistor.  Distributor was put it at TDC and lined up with plug wire #1 on the cap. 

Pages: [1]

Website Security Test
Powered by EzPortal
Website Security Test