Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - SkyHarborCowboy

Pages: [1]
1
Interior / Marine Vinyl
« on: August 28, 2017, 03:24:03 PM »
What brand(s) of vinyl are considered the top tier?

2
Jet Pumps / Running Engine at Home
« on: August 28, 2017, 08:05:46 AM »
You always read don't run your jet out of the water.  Yet you see a lot of folks running their engines at home.

So what is the best way to run your engine at home for such things as setting float levels in the carb and adjusting idle screws etc before heading out to put the boat in the water?


Sent from my iPhone using SoCal Jet Boats mobile app

3
Test / Way Off Topic
« on: July 29, 2009, 12:01:43 PM »
Victor, Victor, Victor I have a write up Phil HAS TO WORK.  My CowPussy hurts too much to do it!

What Now Cow... I mean Al?

 

 
I have a short term fault on the the #1 Engine and Phil needs to work it!

 
I am not working it.  It is an Avionics fault and I am busy working on my stuff while Cow... I mean Al is digging through galleys looking for more food!
 

 
Cow... I mean Al Get out there and work it!
 

 
No, I am not going to work it!  It is Phils Job!  He has the engine!
 

 
Hey Victor!  Look Phil closed up the engine!  Hey Victor, look there is Bowers he got into his car and is leaving for home!
 

 

 
That is IT!  I am Calling Kevin and you two will be in my office in the morning!
 

 
We Are Sorry Victor it will never happen again!

 
What do you mean "We're Sorry"?  I didnt do anything wrong!

 
LOL!
LOL
 
 
 

4
The No Wake Zone / Way To Go Joe!
« on: January 23, 2009, 06:56:56 AM »
Hopefully, there will be some comedic value to Joe in the future!  Otherwise, there will be NOTHING positive to look forward to coming out of D.C. for the next 4 years.  The LOOK is pretty intense after the joke!  I bet Obama was hoping to have Biden Water Borted after this press conference!

I gotta love it, anything to piss of B.H.O!



5
Interior / Forward/Reverse Knobs
« on: January 22, 2009, 11:28:43 AM »
What size threads or on the Shift Levers?  I need to locate a low profile one and/or make one.  The one on my boat is too tall and hits the dash.

Joe

6
Projects / Help With Typing Posts
« on: December 28, 2008, 07:43:17 PM »
Why is it that when I post a reply to someones posts I cant see the text as I am typing it?  When I type a New Thread I can see it.  This is the first and only forum I have been on that does this.  Anyone have any suggestions for me?

Joe

7
Boat Racing / Types of Boat Races
« on: December 23, 2008, 12:13:22 AM »
I know about Drag Boat and K-Boats and Cracker Boat Racing but was wondering what other forms there are to do with a jet ?

Can you list the types of racing, sanctioning bodies and websites for the various forms of racing out there?

Thanks,

Joe

8
Engine Mechanical / Electrical / Mega Squirt Fuel Injection
« on: December 19, 2008, 12:23:11 PM »
Has anyone here run the system on their boat?  What was your total cost and what components did you run for your installation?  Were you happy with the Performance/Economy of the Mega Squirt System?

Thanks,

Joe

9
Boat Showcase / 1988 19' Commander Jet Boat
« on: December 18, 2008, 09:19:07 AM »
Here are a couple of photos of the new toy.  The boat has a 454 with Berkley Jet.  It is basically stock and needs some TLC.  I will post more photos when I get it done.

Joe










10
Projects / Steering Cables
« on: December 12, 2008, 02:16:45 PM »
I am not sure which Forum to put this in so here goes!

I have a 19ft. Commander that has a stuck steering cable on a Berkley Jet. The helm works fine and I am sure that with a simple lube the cable could be freed up but my question is what is the best way to try to pull the cable from the housing? What type of lube should be on the cable? If that is not feasible, where can I find a complete cable with housing? I know Morse used to be (and may still be the best) I will be working on the boat in Orange County, Ca so if there are any shops out that way can you let me know and what should I expect to pay?

Secondary question, how tight a radius can these cables withstand and still work?

Thanks,

Joe

11
Boat Racing / Off The Wall Question About Racing
« on: December 11, 2008, 10:48:05 PM »
I was at the races at Firebird noticed that the slowest boats are in the River Runner Category but to me they still go pretty darn fast.  So here is the off the wall question.

Has there ever been any consideration of running 1/8th mile drag boat races so that guys that have 60-85 mph boats can have some fun at the races as well?  I am not sure how far down the first set of timing lights are but if they were set at 1/8th mile or so I am guessing you might have some fans that are in the stands get their feet wet on a practice/qualifying day.

Just curious!

Joe

12
WTB / Big Block Chevy Oval Port Intake and 800/850 Holley WTB
« on: December 07, 2008, 07:01:09 PM »
If you have something available send me a PM with complete details.

Thanks

13
Boat Showcase / Mid 80's 19' Commander Jet Boats
« on: November 29, 2008, 12:57:45 AM »
What is your opinion on this boat?  BBC 454 325HP with Berkley Jet in good condition.  How do these hulls compare to others out there such as Bahner, Southwind, Eliminator and whatever else you would like to compare them to.  What do you think one would be worth now?

Thanks,

Joe

14
Projects / 70's Vintage Nordic Jet Boats
« on: November 25, 2008, 06:49:20 AM »
What is everyone's opinions of them? I found what seems to be a decent boat in So Cal through a friend but I have no clue about their reputation for quality and whether or not there are any issues with them that I should be aware of. Any insight would be appreciated.  This one happens to be 460 powered with a Berkley Jet.  Is there anything in particular on the engine and/or Berkley I should have a closer look at as well?

Thanks!

Pages: [1]

Website Security Test
Powered by EzPortal
Website Security Test