Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - bahner80

Pages: [1]
1
The Parker Strip / Machine shop needed in parker
« on: November 17, 2017, 04:50:39 PM »
 I need a machine shop or some one capable with the rite tools to replace a valve guide and intake valve on a 049 bbc head
Here's my number any leads greatly appreciated
626-590-2921

2
Jet Pumps / Need some direction
« on: September 23, 2017, 03:34:14 PM »
Changed everything over the winter and thought the change was for the better, but........ now she's riding really wet.
-Dominator 12s suction housing
-Berkeley split bowl
-full droop snoot
-place diverter (manual)
-inducer
-detailed A impeller

-no loader
- no ride plate -(removing  intake wasn't in the budget)
-461 bbc approximately 550-575 hp
Only got about 8 hrs on pump and motor.
She's only seen 5k rpm no wot just yet.
I know a ride plate is a necessity and that will come when uncle Sam gives me some coin but it's bugging the shit outta me she rides wet with all the upgrades and seem to be outta the water a bunch more with the stock berk 12jc.
-1980 bahner sprint
-delta pad bottom

3
Jet Pumps / Bowl-snoot gasket
« on: September 05, 2017, 03:37:32 PM »
So I got about 6 hours on the pump .
Dominator 12s suction housing /inducer
Berkeley bowl and droop
Place diverter.
Motor and pump are both fresh ,been taking it easy this summer and both haven't seen wot throttle (its been hard)
Noticed this gasket rearing it's head last run out @ parker.
Oh it's got an A impeller,
Curious if anyone has had this problem  before

4
Jet Pumps / Prime-a-jet
« on: August 23, 2017, 11:57:24 PM »
Got one from cp and is different threads than what was previously tapped (1/8npt).
The new is bigger not sure what size threads.
Does this guy have to be mounted in the vertical position?  Or is horizontal ok?
Hope I can find a reducer fitting bc I really don't wanna drill and tap the pump while it's in t hg e boat.
Anyone else run into this problem?
Let's see how urs are mounted if ya got em

5
Lower River / Parker (below the dam)
« on: August 23, 2017, 06:01:00 AM »
Just seeing if anyone is going to be in parker this weekend.ill be @ blue water lagoon just up river from big river in a black and grey bubble deck

6
WTB / Mini alternator
« on: August 17, 2017, 08:48:47 PM »
Looking to buy a gm 3 wire mini alternator .     new rail kit front plate moved moved mine to pass side of boat and can't get interior for engine back in place.

7
Engines / Engine Parts For Sale / ISO carb spacer
« on: August 10, 2017, 10:26:08 AM »
Looking for a 2" carb/manifold spacer for 4150 holley.

8
SoCal Lakes / San Diego lakes?
« on: August 04, 2017, 04:57:29 PM »
So elsinore.is gonna close soon due to algae bloom ,perris too small ,puddings tone not an option.
How and where are the lakes in sandiego?

9
The No Wake Zone / So proud
« on: July 27, 2017, 03:13:47 PM »
My son picked out this batman jet boat and slammed tow rig for his hot wheels collection.
Proud dad

10
Trailers / Compete trailer hole
« on: May 12, 2017, 10:28:07 AM »
So I thought an amber marker light went here but looking at my buddy's new to him trailer and boat  he has a  plug here that his trailer wiring hooks up to .
It's an og from 1980 comp trailer and I am trying to bring her back to where she was new.
Any thoughts of what goes there and where I can get it ?
It's an 1.5" hole

11
Jet Pumps / Wtb or trade cradle
« on: March 03, 2017, 03:45:18 PM »
Got a agressor cradle for a tunnel and I need one for a semi v bottom ,
Anyone got one for sale or wanna trade?

Sent from my SM-G900V using SoCal Jet Boats mobile app


12
The No Wake Zone / An fittings
« on: January 26, 2017, 06:11:24 PM »
Looking for a distributor in Riverside County for an fittings and braided hoses.i don't really like ordering off jegs or summit wanna put eyes on all all that I'll need.
Any help is appreciated.
Thanx

13
Project Boats For Sale / For sale late 50s early 60s flatty
« on: January 04, 2017, 11:57:47 AM »
I'm selling my old flatty I acquired a couple years back. I had plans as a family boat but, other boats have been priority. Everything is there and works (minus the starter ) it's all just in need of some love.
-58 - 62 caddillac 390 wide block
-vertex magneto sun tach module under dash
-holly 750 dp
-casale eng. v-drive ,fwd,neutral, Rev
-holly blue elec.  fuel pump & regulator
-cal- marine hard ware
-cable and pulley steering
-fixed ride plate
-3 blade prop
-Water cooled headers(no manufacturer label) thru transom.
Boat is complete  can run and float but by all means is a project

Boat has AZ numbers as you can see but I have no papers on it or trailer. No hin to be found on boat either.

Asking 2k obo

14
Interior / Adhesive removal
« on: October 05, 2016, 12:03:51 PM »
Hey guys,
Completely rebuilding our family boat and wanna keep the stringers bare. There's like 35 year old glue on them including the 3m spray adhesive I used last year. Any tips,tricks or products to recommend to make the job a Lil easier will help thanx

15
Trailers / Competitive trailers ID tag
« on: April 18, 2016, 06:41:11 PM »
Does any one have this on their  trailer?  I'm  painting my trailer while the boat is getting some clear and lettered,I'm trying to bring the whole rig back to original and want to get a new I'd tag.i know it's a stretch but doe any one know where I could get one made or am I spinning my wheels? Any info is appreciated

16
Engine Mechanical / Electrical / Steering column
« on: March 05, 2016, 05:17:05 PM »
Got to get the boat ready to be buffed out and not sure how the steering wheel adapter comes off.im assuming it needs to be taken off with a puller,on a tight budget and don't wanna f#@& this up

17
WTB / Looking 77 bahner
« on: March 03, 2016, 07:47:13 PM »
So the wife and I want to get into comp jet,3 year plan,and want to race with a bahner. Yes a bahner, I see the class is mainly Rogers and a bahner might not be the best choice,but we are a bahner  and Chevy family.  I would like to recreate or resurrect the 77-78 class champion cj-1,if  anyone has a lead on where the original boat is or a 77-78 for sale.i would appreciate the feed.back... any vintage pics,history,stories all welcome

18
Random Boat Parts For Sale / Help my pump funds!!!!
« on: January 26, 2016, 04:28:04 PM »
Misc boat parts for sale. Jacuzzi wj , electric sw gauges, trim tabs ,fuel fills foot pedals ,fuel tanks. Make me an offer all gotta go

19
Gelcoat / Paint / Fireberglass Repair / Fuel tank mounting j ole
« on: January 25, 2016, 07:33:13 PM »
I gotta fill these holes that  I've put a bandaid on for too many summers.  Same tanks going back in while.the fuel tanks get bungs welded.what should I use to fill them and mount tanks back n in same location? All is appreciated thanx.

Pages: [1]

Powered by EzPortal
anything