Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - JTMoney

Pages: [1]
1
Jet Pumps / Jacuzzi energizer kit
« on: April 20, 2015, 07:39:54 PM »
I have a Jacuzzi yj with an energizer kit.  I had a Berkeley before and it had a place on the top of the bowl to put gear oil.  I haven't noticed a spot on this pump for that.  Do I need to search harder?


Sent from my iPhone using SoCal Jet Boats

2
Real Estate For Sale / Spot on row one at MacIntyre
« on: March 27, 2015, 02:02:04 PM »
Selling my spot.  Pretty deep spot.  Can fit 2 boats. Has a canopy over the boat parking. Has a 25' fifth wheel on it with all the basics working.  Will be out there Easter if you want a tour or pics.  Great place for kids.  Grassy and lots of kids on this row.  Asking 6k


Sent from my iPhone using SoCal Jet Boats

3
Engine Mechanical / Electrical / 460 backfiring through carb
« on: September 09, 2014, 05:21:58 PM »
So last trip out after a long run The motor started backfiring through carb.  Now this is an all of the sudden problem.  I'm suspecting bad gas as I was in a hurry and had to fill up at a suspect gas station.  What would cause this?  Am I on the right track or can there be more to it.  I've never had an issue prior to that day.  If I stay off the secondaries it doesn't do it.  But it now idles a little rougher than before.


Sent from my iPhone using SoCal Jet Boats

4
The No Wake Zone / Where to buy box anchor???
« on: August 11, 2014, 12:32:07 PM »
Around corona.  Also would like to grab a sand spike too.


Sent from my iPhone using SoCal Jet Boats

5
Trailers / Need Help in Blythe
« on: July 25, 2014, 10:03:44 PM »
Lost a trailer tire and the rim as well.  Any one have a "guy" out here?


Sent from my iPhone using SoCal Jet Boats

6
Interior / Where to buy new bimney???
« on: July 15, 2014, 07:57:37 PM »
Anywhere I can go to near Corona and buy one?  Or is it better to order one.  I would like to have it within a week.  Is that possible?


Sent from my iPhone using SoCal Jet Boats

7
Jet Pumps / Place diverter help
« on: June 14, 2014, 01:27:24 PM »
So I just got a new Bennet pump and it works fine except when it hits full up.  It seems to lock up and when I try to go down you hear the pump try to pump but it won't move.  If I loosen a line and move it down a little it works fine in the up and the down.  But as soon as I go all the way up its stuck.  What should I do?

8
Engine Mechanical / Electrical / Accelerator pump question
« on: June 13, 2014, 02:41:34 PM »
I have a Holley 650 I believe and the accelerator pump is leaking bad.  I know I need to replace the diaphragm but I don't know where to get one ASAP.  Also are there different sizes.  And how can I be sure I get the right one.  I am in Corona and don't know of any places near by.


Sent from my iPhone using SoCal Jet Boats

9
Random Boat Parts For Sale / Looking to buy hyd place diverter pump
« on: June 05, 2014, 05:18:13 PM »
Anyone have a used one in working condition for sale?

10
Engine Mechanical / Electrical / Loctite freeze plugs?????
« on: May 27, 2014, 06:27:42 PM »
Is that a common practice???  I have 2 that leak bad and I'm trying to replace them but they won't come out the normal way.  I'm gonna have to pull this damn engine to get to them so I can see.  But I have a feeling that they are loctited in there.

11
Engine Mechanical / Electrical / Trusted BBF builder near Corona
« on: May 26, 2014, 07:46:34 AM »
Like the title says, I'm looking for a guy to build me a reliable Ford for my boat.  Right now I have a pretty fresh 429 with dove heads, hei, forged pistons and some svo internals.  I figure I'm at about 350 hp.  I'd like to be at about 600 hp but I'm not sure what route to go.  I know i want to put a different crank but just not sure if I need a stroker or just a 460 crank.  So ford guys, help a brother out.

12
Project Boats For Sale / Shuster for sale with blown olds with berkley
« on: January 24, 2012, 02:29:42 PM »
Motor spun a rod and i don't feel like fixing.  My pics are too big to post but i can email them if you are interested.  2000 or greatest offer.

13
Sand / Glamis Halloween
« on: September 27, 2011, 09:13:16 PM »
So my buddies aren't gonna have their rails done by then and that's gonna be my only trip of the year.  So anyone with vw type rails gonna go that weekend.  Id like to get a group together or tag along with someone else's group.  Preferably none of the long travel guys because I cant do 70 through the dunes but if that all you guys got I would love a ride in one.

14
The No Wake Zone / Milestone sat
« on: September 16, 2011, 04:38:40 PM »
Weather is perfect anyone want to hit the vet track.

15
Engine Mechanical / Electrical / How hard can it be?????
« on: August 29, 2011, 07:17:59 PM »
So I've got my motor broken down and ready to fix.  So a local shop around here says they will rebuild it and give it back to me completely sealed for 2400.  That's more than I want to spend.  So I was wondering if I sent everything out to be machined and then put it back together myself how much would I save.  The shop said they put new pistons, bearings, cam rockers and lifters.  Is that a good deal?   If I do all the same stuff myself would I save a lot of cash?  Also is my cam bad?  How do I know if I can keep it and reuse it?  And finally how hard is it to put the motor back together myself.  The guys in tv make It look easy.   Are there any special tools other than a torque wrench that I need.  Also how do I know if I have all my clearances correct.  Last thing I want to do is save five hundred bucks putting it together only to pull it apart again and spend the 2400 to have it done.   So any advice is really appreciated and if anyone wouldn't mind helping me I would be very appreciative in the form of ice cold beer.

16
Engine Mechanical / Electrical / Seized olds
« on: August 21, 2011, 01:15:29 PM »
So my boat just died in the middle of the river and wouldn't start.  The starter engages but won't turn.  I was hoping the battery was just dead or worst case the jet seized because I need a new one anyways.  So I get home and meter the battery and it has 12 volts. I take a rachet and turn the motor back a little and try to start.  It turned to the point it was at before I turned it.  I disconnect the jet and that spins freely so obviously my motor is seized.  So what's the next step.  Is it as simple as new listing and a bore job or could it be the bottom end.  Where do u start to figure it out.  Also it was a great time at Big River this weekend.  You guys are really cool and I'm glad I joined the forum.

17
Events / Long Beach races.
« on: August 01, 2011, 06:36:05 PM »
Who is going?  I plan on bringing the ez up and crushing beers on the beach.  Let's party

18
Lower River / wants to check out blythe
« on: July 27, 2011, 04:43:47 PM »
I generally go to big river or Laughlin but I wanted to try Blythe.  I have a flatty so water level isn't a big deal.  I mainly want to know where to stay and where the hang out spots are.  I need a place to stay that is dog friendly.  We are a young family looking for some people to boat with.  I'm 26 and my wife us pregnant. I drink but not out of hand.  Well not intentionally at least.  If anyone has any info orr is organizing a trip I wouldn't mind being invited.

Pages: [1]

SMFPacks CMS 1.0.3 © 2020