Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Brad @ SCJB

Pages: [1] 2 3 ... 468
1
The No Wake Zone / Horsepower Fest 2019 Shirts and Posters
« on: November 21, 2019, 12:20:25 PM »
Thank you to everyone who came out to Horsepower Fest 2019 and made it a huge success!

Grab your Event Shirts and Posters before they are gone for good! We will not be doing another run of shirts, so once they are sold out, they are gone!

https://Store.SoCalJetBoats.com

3
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 11, 2019, 02:48:35 PM »
Need a BBC Oil pan ASAP in North orange county

Sent from my SM-G965U using SoCal Jet Boats mobile app


4
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 11, 2019, 07:32:29 AM »
Bryan Couey came by to assist with setting the intake back in the boat then we glassed in the sub floor and bulkhead. Today we're gunna be at Place Diverter & Controls to have Tim and his team put the pump in and rig everything associated with it.

Sent from my SM-G965U using SoCal Jet Boats mobile app


5
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 10, 2019, 03:39:09 PM »
What did you paint the stringers with or is that just a stain?
It's a stain

Sent from my SM-G965U using SoCal Jet Boats mobile app


6
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 10, 2019, 12:45:58 PM »
Stringers are glassed in. Gunna set the intake while we wait for the resin to cure.

Sent from my SM-G965U using SoCal Jet Boats mobile app


7
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 09, 2019, 06:44:23 PM »
Stringers are set....

Sent from my SM-G965U using SoCal Jet Boats mobile app


8
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 09, 2019, 04:29:22 PM »
Stringers are cut n shaped....jig setup as well. We're about to set them in

Sent from my SM-G965U using SoCal Jet Boats mobile app


9
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 09, 2019, 02:07:02 PM »
Installing new stringers today

Sent from my SM-G965U using SoCal Jet Boats mobile app


10
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 09, 2019, 12:48:57 AM »
Almost 1am and still at it....trying to get all the glue off the floor so the fiberglass bonds when we go to overlay the stringers

Sent from my SM-G965U using SoCal Jet Boats mobile app


11
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 08, 2019, 09:02:30 PM »
Darrell and I got the stringers out and now sanding down the old carpet glue. Keep on truckin. Failure is not an option!

Sent from my SM-G965U using SoCal Jet Boats mobile app


12
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 08, 2019, 01:26:20 PM »
It's been a very long process to get to this point but the paint is finally done! We had some technical issues with some of the paints, but Khaos Kustom Paints (Mike Buschman and James Rankin) finally got her done late last night.

Big thanks to Tamco Paints for donating the materials and thank you to the following people who jumped in and helped out for the past few days...and thank you to their spouses/families for being understanding as we hammered through some very long nights.

James Rankin
Mike Buschman
Kelly Buschman
Brian Couey
Painter Dave
Joe Balakoski

Also thank you to Gary Lewis Electric for letting us use his paint booth!

We're super excited to have everyone come together next weekend to help us find this boat a new home!

Information about the raffle can be found here:

www.HorsepowerFest.com

Sent from my SM-G965U using SoCal Jet Boats mobile app

13
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 06, 2019, 11:46:00 AM »
Mike's working his magic trying to wrap up the paint today!

Sent from my SM-G965U using SoCal Jet Boats mobile app


14
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 06, 2019, 11:08:26 AM »
Picked up the trailer yesterday from Scott at E-Blast dustless sand blasting in Menifee, CA. They did an amazing job. All new paint, wiring, lights and bunks!

https://www.facebook.com/eblastmobile/

15
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 03, 2019, 04:43:26 PM »
Sorry man, it didn't cross my mind at the time but I got one on the way! Thanks anyways!
I asked you what else you needed I have like three of those

Sent from my SM-G930V using SoCal Jet Boats mobile app

Sent from my SM-G965U using SoCal Jet Boats mobile app


16
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 03, 2019, 04:42:37 PM »
Just picked up the seats from getting covered!

Sent from my SM-G965U using SoCal Jet Boats mobile app


17
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 01, 2019, 07:37:55 PM »
Crap, got busy with kids and forgot to check my stash.  Just set myself a reminder to check when I get home.

I got a set of inlets and thermostat from Mike V. Thanks!

I am looking for a working basset T if anyone has one! Thanks!

18
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: November 01, 2019, 07:34:52 PM »
Still waiting on the paint n stringers to be done. I wish I could get it to you guys sooner, but I cant rush Buschman and Rankin anymore than I have or else they will give up on me lol

edit: pump looks great by the way! Thanks!

19
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: October 28, 2019, 07:46:15 PM »
What parts are still missing/needed?

I am looking for water inlets and the outlet on the manifold. If anyone has these items and willing to donate, please PM me. Thank you!

20
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: October 28, 2019, 09:07:08 AM »
Quick update......James Rankin and Mike Buschman have been busting their ass. They got the boat flipped over and fixed some troubled areas including the cracked strakes.....the hit it with some filler primer then shot it with polyurethane single stage white and then clear. They are going to let it bake in the sun today then it will be ready to be flipped over and start on replacing the stringers and prepping the top for paint.

The trailer is over at e-blast dustless sandblasting in Menifee, CA....trailer has been blasted, they gotta weld up a few cracks, then they are going to primer it today.


21
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: October 19, 2019, 09:16:47 AM »
Got the seats donated by Geoff at Twisted Liquid Marine in Lake Havasu City, AZ. Check then out!

Sent from my SM-G965U using SoCal Jet Boats mobile app


22
Yes, get aluminum. I don't ever see poly tanks in any of these boats.... probably a reason why everyone runs aluminum

Sent from my SM-G965U using SoCal Jet Boats mobile app


23
I have heard of good success on aluminum tanks with POR15 (https://www.por15.com/POR-15-Fuel-Tank-Sealer).....but if you want all your  worries to go away, have another set of tanks made. IMCO can make you new tanks. I had a set made about 10 years ago and it was in the $800 range.

http://www.imcomarine.com/cal_store/fuel-tanks/custom-tanks/custom-aluminum-gunnel-tank.html

24
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: October 14, 2019, 12:27:52 PM »
Got the headers from Chad Hundley over the weekend from Chad's Customs! They turned out amazing!

Sent from my SM-G965U using SoCal Jet Boats mobile app


25
Projects / Re: Horsepower Fest 2019 Raffle Boat Build
« on: October 14, 2019, 10:48:58 AM »
Any pictures of the new stringers install?

The new stringer install hasnt begun yet. That will be taking place this week/weekend.

Pages: [1] 2 3 ... 468

Website Security Test
Powered by EzPortal

Website Security Test