Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 76Rogers

Pages: [1] 2 3 ... 6
1
Projects / Re: 1976 Rogers TR Face Lift
« on: May 20, 2019, 08:24:29 PM »
A few pictures of the orange out in the sun

2
Projects / Re: 1976 Rogers TR Face Lift
« on: May 19, 2019, 10:20:50 PM »
Also, yes Iím aware that the orange on the boat and trailer donít match lol.


Sent from my iPhone using SoCal Jet Boats

3
Projects / Re: 1976 Rogers TR Face Lift
« on: May 19, 2019, 10:16:53 PM »
A quick update on this build. Got the motor and seats back in and got it re rigged and almost ready to go. I still need to get the lettering done and put the new valve covers on. Aside from that, just a few more small things I still need to button up, and sheís ready for her maiden voyage.

4
Projects / Re: 1976 Rogers TR Face Lift
« on: May 14, 2019, 08:08:32 AM »
Thank you all for the kind words. Weíve been putting in serious work trying to get this thing finished before it gets too hot to work on. Hoping to have it polished and put back together by next weekend.
As far as power goes, Iím just putting the old 454 back in it. Maybe next year when my pockets arenít hurting from the paint job Iíll put a little extra work in the motor, build it to a 468 and rebuild the pump. Or if I play my cards right, in a couple years Iíll enter the forbidden world of LS. There was a twin turbo LS powered Kona at LS fest that got the gears turning in my head. Good thing those gears drowned out the sound of my wallet screaming🤪


Sent from my iPhone using SoCal Jet Boats

5
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 08:12:01 AM »
I still have to do the wet sand, buff and wax process once this cures for a few days, but it looked too good not to post. I couldnít contain myself


Sent from my iPhone using SoCal Jet Boats

6
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 08:07:12 AM »
Aaaaaaaaand finally and weeks of prep and paint, the final product after clear was shot

7
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 08:04:33 AM »
Orange going down

8
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 08:01:53 AM »
My father in law shot the base coat on top without me so I wasnít able to get pictures of that, but hereís the white base with the lines getting taped out for where the orange is going

9
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 07:57:49 AM »
After more and more sanding, got the primer down and shot the single stage on the bottom

10
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 07:55:31 AM »
The fun part started when the primer went down and I could start to see a major transformation already

11
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 07:53:01 AM »
Got it off the trailer and test fitting in the garage before poly goes up

12
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 07:51:35 AM »
Sanding and filling cracks

13
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 07:46:16 AM »
Started with some little fiberglass stuff like a new box for the driver side seats

14
Projects / 1976 Rogers TR Face Lift
« on: May 13, 2019, 07:41:22 AM »
Well after finishing the final major milestone of this project, I figured now would be a good time to throw up some pictures of my progress so far. Here's my 1976 Rogers Bonneville TR that I've had for about 6 years and I've finally had the time and funds to give it the proper treatment she deserves.

15
The No Wake Zone / Re: Boating licence??
« on: March 04, 2017, 09:12:42 AM »
If I posses a boating license from another state, does this still apply? Or do I have to go through the whole process again for each state I boat in.   


Sent from my iPhone using SoCal Jet Boats

16
Boats For Sale / Re: Craigslist & ebay boats
« on: June 21, 2016, 09:46:16 PM »
http://phoenix.craigslist.org/wvl/boa/5647361063.html
If that description ain't a kick in the nuts, I don't know what is lol. Looks like a clean boat and its going for cheap.

17
Boats For Sale / Re: Craigslist & ebay boats
« on: June 10, 2016, 10:56:35 PM »
https://inlandempire.craigslist.org/boa/5629965972.html
Beautiful open bow advantage.


Sent from my iPhone using SoCal Jet Boats

18
Boats For Sale / Re: Craigslist & ebay boats
« on: June 07, 2016, 02:51:39 PM »
https://orangecounty.craigslist.org/boa/5611148159.html
no pictures, but it's a Rogers.


Sent from my iPhone using SoCal Jet Boats

19
Projects / Re: Project Mach 1 19ft
« on: April 25, 2016, 08:33:26 PM »

Took it out for test run on new motor..
Tunnel ram has to go .... But the motor is solid


Sent from my iPhone using SoCal Jet Boats
that thing cleans up nice.👍🏻


Sent from my iPhone using SoCal Jet Boats

20
Boats For Sale / Re: Craigslist & ebay boats
« on: April 24, 2016, 12:42:05 PM »
https://mohave.craigslist.org/boa/5553720737.html


Sent from my iPhone using SoCal Jet Boats

21
The No Wake Zone / Re: What did you do to your boat today?
« on: April 21, 2016, 10:22:45 AM »
Mocking up the puke tank so we can make some brackets.


Sent from my iPhone using SoCal Jet Boats

22
Gelcoat / Paint / Fireberglass Repair / Re: Transom holes
« on: April 10, 2016, 07:29:26 PM »

You're going to have to grind out that whole area well into the parent material at least 3 or 4 inches. Fill in the whole area with fiberglass , smooth, then apply gelcoat to match. I imagine the inside is the same? Is it only on one side or both sides? You'll have to find out what causes that. Water leak ,maybe wrong material used for a plug , maybe "hull slap". I really don't think grinding with a dremel and some epoxy is a fix. Good luck bro.
It's not doing the same on the inside, just the outside.


Sent from my iPhone using SoCal Jet Boats

23
Gelcoat / Paint / Fireberglass Repair / Transom holes
« on: April 10, 2016, 04:31:08 PM »
The through transom holes on my boat are starting to crack where they were previously filled in. Has anyone else experienced this and what's best way to fix it? I know people say they fix other cracks by grinding the cracks out with a dremel and filling them back in with a 2 part epoxy. Is this the route I should go or has anyone tried anything else?


Sent from my iPhone using SoCal Jet Boats

24
Boats For Sale / Re: Open bow 4 sale
« on: April 09, 2016, 02:22:25 PM »
Pretty clean Carrera.
https://phoenix.craigslist.org/nph/boa/5531228773.html


Sent from my iPhone using SoCal Jet Boats

25
Boats For Sale / Re: Selling my 89' Commander
« on: April 06, 2016, 09:04:22 PM »
This thing is bad ass. Good luck with the sale.


Sent from my iPhone using SoCal Jet Boats

Pages: [1] 2 3 ... 6

SMFPacks CMS 1.0.3 © 2020