Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Teamwindle22

Pages: [1] 2 3 ... 5
1
Looking for a 10 quart gen 5 or 6 oil pan


Sent from my iPhone using SoCal Jet Boats mobile app

2
SCJB Top 10 List / Re: SCJB 2018 Top 10 List 2018 Reboot
« on: March 22, 2018, 07:03:18 PM »
You gonna polish the toons first?


Sent from my iPhone using SoCal Jet Boats mobile app
Haha, you will see soon enough


Sent from my iPhone using SoCal Jet Boats mobile app

3
SCJB Top 10 List / Re: SCJB 2018 Top 10 List 2018 Reboot
« on: March 22, 2018, 04:51:50 PM »
I have something coming for this list 🤭


Sent from my iPhone using SoCal Jet Boats

4
Random Boat Parts For Sale / Re: Harwood Scoop for sale
« on: June 13, 2017, 06:28:30 AM »
Where are you located?


Sent from my iPhone using SoCal Jet Boats

5
Random Boat Parts For Sale / Re: Harwood Scoop for sale
« on: June 13, 2017, 06:26:17 AM »
Still available? Have a buddy that wants it


Sent from my iPhone using SoCal Jet Boats

6
Boat Showcase / Re: New Float
« on: May 02, 2017, 07:47:39 AM »
Yeah buddy, time for that flag


Sent from my iPhone using SoCal Jet Boats

7
Have a set of oval port 049 heads for a BBC went through and redone by Bostick, re surfaced, stock valves, bronze guides, hardened exhaust seats, double springs and retainers. 700 OBO


Sent from my iPhone using SoCal Jet Boats mobile app

8
SCJB Top 10 List / Re: Call out # 4 Johnny Windle
« on: April 29, 2017, 07:51:50 PM »
Let me know when is good for u Windle..? I want that red Rocket lol


Sent from my iPhone using SoCal Jet Boats
I won't have the bottle set up ready, but my other goodies will be installed


Sent from my iPhone using SoCal Jet Boats mobile app

9
SCJB Top 10 List / Re: Call out # 4 Johnny Windle
« on: April 29, 2017, 07:46:48 PM »
Accepted, will be ready in a week or 2.


Sent from my iPhone using SoCal Jet Boats

10
WTB / Re: Looking for a hydraulic place diverter pump
« on: April 13, 2017, 09:44:14 PM »

I  have one as well,   Need to test it but it worked fine when it came out of the boat....

$75
Still have it? Interested for a friend, can pick up this weekend


Teamwindle 🚤🇺🇸

11
Engine Mechanical / Electrical / Re: Motor setup?
« on: March 16, 2017, 07:02:45 AM »

Hey guys, here it goes. Iím in the midst of rebuilding my BBC and I have no idea where to go with it.
Hereís what I mean.
 
As is, I have a Hardin marine 454 with the 405 kit. When I bought the boat, it came with a duel Holly 650 tunnel ram, 049 heads, harman exhaust logs and snails, stock bore and domed pistons. Iím unsure of what the HP is/was. The previous owner figured around 450 hp, I donít know, but it pushed my 81 Bahner bubble deck with Berk JG pump (no droop and original nozzle) to 67 mph at 5100 rpm. Iím going to have the pump freshened up and already have a droop and place diverter ready to be installed when the motor build is complete. I know that hull set up and pump have a lot to do with MPH and will be working on that when the motor is complete. It is a delta pad hull by the way.

I pulled the motor apart because I was having blow bye on some of the cylinders. Oil through the breathers made a huge mess in my boat. :banghead:

Back to my original comment of not knowing where to go with the motor. Hereís where it gets tricky for me.

I love the ďold-schoolĒ look that the duel carb tunnel ram set up gives my boat and donít really want to change it, but I was given, for free, a set of Merlin 043-C rectangle port heads, a matched Edelbrock Victor intake manifold and a Holley 950 Carb. All this came from a friend of mine who took it off of his 2-season old BBC. He now built a 950 HP blown BBC V-drive deal and had this stuff laying around. Obviously, he wants it back if I donít use it.

I know that the Merlin heads are an ďupgradeĒ (Still heavy as hell) to the 049 heads, but Iíve also read that I can get great flow and HP numbers out of the 049 heads that I have and I wouldnít have to change the look and all the damn linkage of my boat.

So, after all of that this is what Iím trying to ask. My goal is to break into the 80-mph window. I feel like with my hull and pump set up correctly I should be able to do that with 550-600 HP at 5200-5500 RPM. Or am I bat shit crazy? Iím ok with a reality check on this. Iíd rather be realistic and not be disappointed then to be disappointed at the end of this.

Iím planning on going .60 over with a dome style piston. Hydraulic roller cam, I donít know the numbers on the cam Iím going to go with yet. I want it to be healthy, but I also want to be water reversion conscious when I choose the cam as Iím going to be running TT headers.

First, Can I achieve that HP goal with the 049 heads without having to modify them? And, should they be able to handle a healthy roller cam I throw at it?

Or

Should I forget about the ďold-schoolĒ of the tunnel ram and go with the Merlin rectangle port heads and victor intake set up to reach my goal?

I donít mind tips on set up for the rest of the motor either!
 
I know that this is a very long-winded post so, thank you to those of you still reading. Hopefully you can help me on this!
I have a 79 Bahner, BBC 496 with iron truck heads 8 and a half to 1 compression, basic truck motor and pump work done, before my pump work I ran about 72 mph @ 5300 rpm, now I run 5900 rpm, now that I got my pump work done and my impeller cut from an A to a B, I am around 80 mph, pump work is definitely key. 👍🏻


Teamwindle 🚤🇺🇸

12
Interior / Re: Flag mounts?
« on: March 10, 2017, 06:33:22 AM »

ya after a few Corona"s and killer " bong hits, I came up with a crazy idea of using an actual matching fuel fill with cap installed into the engine cover. The end of the filler neck would be threaded so like shocker said screw that bitch in " lol"  if you really wanted to make it stripper pole tough" you could go straight  through the filler neck and mount it to the bell housing with a fabricated mount like yours. Just a crazy idea, just sharing my thoughts" 


Sent from my iPhone using SoCal Jet Boats
Haha now we are talking, can't wait to see how it comes out, 👍🏻👍🏻


Teamwindle 🚤🇺🇸

13
Interior / Re: Flag mounts?
« on: March 09, 2017, 12:25:44 PM »

I have the same set up as shocker" I would be interested in some ideas for a flag mount, count me in.


Sent from my iPhone using SoCal Jet Boats
What are you working with? Any ideas where to mount yet?


Teamwindle 🚤🇺🇸

14
Interior / Re: Flag mounts?
« on: March 09, 2017, 12:23:30 PM »

BOOM, Ive got it lol, I could drill a small hole in the engine hatch, make a bracket like you said on the bell housing, but have the bracket and the bottom of the pole be threaded, just screw that bitch in ! :thumbup:
There you go partner, perfect idea, you can use a rigid coupling on the bottom bracket, and use a 3/4" rigid conduit for the pole or if you wanted to use something lighter, you could always thread it, I'm a sparky so that's why I am thinking electrical parts to use haha, good luck man and hope it works out, update with pics when you do it man, would like to see how it comes out 👊🏻👍🏻


Teamwindle 🇺🇸

15
Interior / Re: Flag mounts?
« on: March 08, 2017, 09:03:08 PM »

Ive been trying to come up with something for the Shockwave but the engine is covered. I made a bad ass pole for my buddys pontoon that quick disconnects and he flys a big ass jolly roger and an old glory. I put American flags on everything just like you do lol. Just haven't figured out anything yet without drilling holes into my hull.
Right on, never a bad thing flying the colors man, loud and proud. I have a buddy that mounted a bracket to the back of his hull, but not sure if you want to drill holes in it you know? You could always make a bracket off the back of the motor or bell housing area, and drill a hole in the engine hatch, and make a plug that is removable for when you transport the boat on the trailer. Hard to explain in words but have some ideas in my head on how to do it lol


Teamwindle 🇺🇸

16
Interior / Re: Flag mounts?
« on: March 08, 2017, 07:36:49 AM »
No problem man, good luck and hope it turns out good


Sent from my iPhone using SoCal Jet Boats

17
Interior / Re: Flag mounts?
« on: March 07, 2017, 11:02:53 AM »
This is what I did, hasn't failed me yet


Sent from my iPhone using SoCal Jet Boats

18
Interior / Re: Flag mounts?
« on: March 07, 2017, 08:16:46 AM »
Do you have an engine cover or an open motor with a ski bar?


Sent from my iPhone using SoCal Jet Boats

19
WTB / Re: Looking for a straight snoot
« on: February 28, 2017, 04:29:51 PM »
Do you have a droop it swap with? I know someone that has one and wants a droop


Sent from my iPhone using SoCal Jet Boats

20
SCJB Top 10 List / Re: Top Ten List
« on: November 23, 2016, 09:48:26 PM »

I will say as of now the #6-9  boats are all 100mph boats. And johhny Windle is definitely doing some changes this year as well.


BECKY WITH THE GOOD HAIR!
Definitely am partner, have to do I can keep up with the big dogs, another great summer with everyone and can't wait for the next season 👌🏻👍🏻🍻


Teamwindle🚤🇺🇸

21
The No Wake Zone / Re: I want to see tow riggs
« on: October 06, 2016, 11:06:55 AM »
Rocket hauler for the red rocket


Teamwindle🚤🇺🇸

22
Events / Re: Annual SCJB 2016 Fall Get Together
« on: October 06, 2016, 11:04:14 AM »

Nice " you guys rock "


Sent from my iPhone using SoCal Jet Boats
🍻👊🏻


Teamwindle🚤🇺🇸

23
Events / Re: Annual SCJB 2016 Fall Get Together
« on: October 06, 2016, 08:46:32 AM »
Team windle and Garrett leaving today around 3 330, kick the tires and light the fires, going to be a bad ass weekend 🍻


Teamwindle🚤🇺🇸

24
SCJB Top 10 List / Re: Position movement
« on: September 21, 2016, 09:06:15 AM »
Haha, don't have all the parts yet, hopefully will be here soon, want to try it again 👍🏻


Teamwindle🚤🇺🇸

25
SCJB Top 10 List / Position movement
« on: September 20, 2016, 09:03:54 PM »
I Teamwindle #7 want to call out #6 Dewey! 🍻


Teamwindle🚤🇺🇸

Pages: [1] 2 3 ... 5

Website Security Test
Powered by EzPortal
Null

Website Security Test