Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - king295

Pages: 1 ... 3 4 [5]
101
Engine Mechanical / Electrical / Re: Baseline Jetting Suggestions
« on: April 12, 2017, 08:15:47 PM »
Well my lack of knowledge is apparent... here are pictures of the carb, perhaps this will help? If not, what am I looking for? Thanks for all the replies thus far, where I lack in knowledge I make up for it with beer on the water this summer.


Sent from my iPhone using Tapatalk

102
Engine Mechanical / Electrical / Baseline Jetting Suggestions
« on: April 12, 2017, 11:32:25 AM »
Looking for some baseline jetting suggestions as I will be ordering jets for my carb in the next few days and wanted to get a read from you guys on where to start and the ranges I should get.

Boat:
19ft shallow v with a berkeley pump and diverter

Motor Setup:
454 BBC
Edelbrock Victor Jr. intake
Holley 850 carb (previously said 750)
Dooley air scoop
Don't know the exact cam but it is mild
OT Rewarder headers

Any suggestions / baselines are appreciated.

103
Engines / Engine Parts For Sale / Re: Bassett Headers for BBC
« on: April 02, 2017, 01:07:08 AM »
Price drop... $175 obo.

104
Engines / Engine Parts For Sale / Re: Bassett Headers for BBC
« on: March 31, 2017, 10:24:54 AM »
....

105
Engines / Engine Parts For Sale / Re: Bassett Headers for BBC
« on: March 30, 2017, 03:13:15 PM »
I wish u could ship I would take them of your hands

Sent from my XT1650 using SoCal Jet Boats mobile app

PM sent.

I updated the ad as well to drop the price for a small issue noted, see above.

106
Engines / Engine Parts For Sale / Bassett Headers for BBC
« on: March 29, 2017, 08:48:27 AM »
Bassett headers for a big block Chevy. Painted black with injection lines. In good condition with a small hole in one of the tubes next to the injection line (see second picture furthest tube to the left) . $175 obo. Located in Los Angeles / Orange County area. Prefer not to ship.


Sent from my iPhone using Tapatalk

107
WTB / Re: Hydraulic Place Diverter Parts and Misc. Other Items Wanted
« on: March 24, 2017, 10:37:56 AM »
I have an extra lid for the hydraulic pump, you can have it if you haven't already got one, just pay for shipping lol

Sent from my SM-N910V using SoCal Jet Boats mobile app

PM Sent

108
WTB / Re: Hydraulic Place Diverter Parts and Misc. Other Items Wanted
« on: March 22, 2017, 08:22:11 AM »
Updated to add a set of BBC valve covers. Just looking for a cheap set to temporarily cover my heads while my regular covers are being polished. Boat will not be ran with these on.

109
WTB / Re: Hydraulic Place Diverter Parts and Misc. Other Items Wanted
« on: March 21, 2017, 03:52:31 PM »
Don't have anything to sell you

But just an FYI

Go to G&J in Ontario. They can make you the lines and get you some bulkhead fittings for a hell of a lot cheaper than pd

Mine were 16 each and I already had the  -4 bulk head fittings


Sent from my iPhone using SoCal Jet Boats

Thanks for the info, liking those lines. PM sent for more info.

110
Real Estate For Sale / **DELETE**
« on: March 21, 2017, 11:25:23 AM »
Found what I was looking for

111
WTB / DELETE
« on: March 21, 2017, 08:16:37 AM »
Mods, please delete. Thanks.   :beer: :beer:

112
Young gun powder in rancho Cucamonga does a nice job with ceramic coating. Don't know where you are though...

Sent from my Z981 using SoCal Jet Boats mobile app

Thanks for the lead, I will give them a call. Updated my profile, I'm in OC but don't mind dropping them somewhere. Just looking to get it done right at a reasonable price.

113
Engine Mechanical / Electrical / New boat - Carb and header questions
« on: March 14, 2017, 10:58:16 AM »
Just picked up this original owner Silverado with a stock BBC. The boat has been sitting for a few years so it needs some attention.

Looking for some help identifying the carb on as I would like to buy a rebuild kit and pick up a traditional Bassett style air scoop.

I am also interested in ceramic coating or re-chroming the headers but not sure what my options are there. They have been painted black every year by the previous owner and presumably sanded down each time so I'm not sure what they would even look like if I tried to go this route. Thoughts?

I am also in search of a complete hydraulic place diverter if anyone has a lead.













114
Random Boat Parts For Sale / Re: Parts
« on: March 13, 2017, 10:11:13 AM »
PM sent  8)

115
The No Wake Zone / Re: What to look out for... (warning new guy post)
« on: January 19, 2017, 11:33:24 AM »
My dad's best quote.

"Don't buy it unless you can steal it"

Small ball peen hammer to test stringer integrity. Should sounds like you're hitting concrete, not a tissue box.

Compression test on the engine, pull the dipstick, look for moisture and/or rust.

What pump?
Look at the electrical under the dash (shocking how often this gets missed).

Look under the hull at the keel in the bow area (common for beaching damage to occur)

Crawl under it and look into the pump.

Take it for a test drive, even if it costs you a tank of gas and a 12 pack of beer.

Best advice I can give you, look at EVERYTHING. If you really want a Chevy, buy a boat with a Chevy, don't settle because it's cheap.

GT

Great points, thanks! I should have mentioned it has a Berkeley jet. Is there anything specific I can look for? Bearings, play, etc.?

If the weather permits on Saturday I am going to try and get it out on the water at Lake Perris prior to buying it.

I have a Chevy powered boat lined up that is a family friend's that I will ultimately buy if the wife enjoys this cheaper introduction..... who am I kidding I will buy it either way, I can always sleep on the couch. Besides two boats are better than one.

116
The No Wake Zone / What to look out for... (warning new guy post)
« on: January 19, 2017, 09:42:55 AM »
New to the forum but have been lurking around for a few years. Finally deciding to pull the trigger on a jet boat since I sold my Ski Nautique. I have a 1970's Rogers lined up to take a look at this weekend. Its got a 455 olds in it (not my preference, bow tie would be better) and looks to be in fair shape with the upholstery recently redone. The price is right and won't sting too bad if I don't use it as much as I would like.

I'm looking for any suggestions on things to look out for that are unique to jet boats (olds motors, pump, hull, etc.). I've owned ski boats, jet skis, and motorcycles so I am familiar with the general things to look for but wanted to see if there is anything specific I should be on the look out for. Any input is greatly appreciated and will be repaid in beer on the water this summer.  :beer:

Pages: 1 ... 3 4 [5]

Website Security Test
Powered by EzPortal

Null

Website Security Test