SoCal Jet Boats

Tech Talk => Projects => Topic started by: 2savage4you on February 15, 2008, 11:32:20 AM

Title: BAHNER
Post by: 2savage4you on February 15, 2008, 11:32:20 AM
I just went down to see about new upholstery for the boat , i think i got a deal since this is my third jet boat they are doing, Hey Rod you wanna give me some color idea's for the interior ??? Were thinking light blue with yellow accents...

And NO im not starting another project thread........ this is my keeper.....................BITCHES >:D
(http://i223.photobucket.com/albums/dd269/2savage4you/019-1.jpg)
This interior went back into the Omega.. I want it done right.. This ride WONT be pieced together from other boat parts   well atleast not from the Omega ;D

Soooooooo throw me some ideas on the upholstery..... Oh ya Brad i need some more stickers :-*
New boat, trailer, back window and how about a deal on the big one for my windshield ;D Just because im an AZ boy dont mean i cant represent.........

2sav
Title: Re: BAHNER
Post by: OC2Vegas on February 15, 2008, 02:19:07 PM
how much are they doing the interior for?
Title: Re: BAHNER
Post by: 2savage4you on February 15, 2008, 02:57:09 PM
Depending on how much carpet they use, Right around 1K

My last 2 boats they did i spent Over 2K each :o

2sav
Title: Re: BAHNER
Post by: Marcsrollin on February 15, 2008, 03:02:33 PM
We hand built this and paid $800 to get it uphulstered.


[attachimg=#]
Title: Re: BAHNER
Post by: hotrod56cars on February 15, 2008, 03:03:48 PM
... Hey Rod you wanna give me some color idea's for the interior ??? Were thinking light blue with yellow accents...


2sav

I'd say that at least 80% of the people on this board think my color choices and photoshopped paint schemes are disgusting and that my artistic ability is low, I agree with that 80+% on the artistic ability. You may want some advice from a pro. BUT  >:D  if I get a chance I'll phuck with it in photoshop, changing the interior color is a lot easier and faster than doing a photoshopped paint job. Spare time is gone, now that I am working and all... [attachimg=#]
Title: Re: BAHNER
Post by: COORS HEAVY on February 15, 2008, 03:04:25 PM
HOLY SHIT 2K WHEN I DID MINE I MADE MY OWN SEATS (JUST COPIED THE ONES THAT WERE IN THERE ALREADY). AND THEY CHARGED ME 300.00 AND THAT WAS TWO SEATS TWO BENCHES A PULLEY COVER SIDE PANELS TO COVER THE TANKS AND A REAR PIECE. WHITE WITH BLUE AND ORANGE STRIPES AND BLUE PIPING. THE THE CARPET WAS 350.00 ALL THE WAY TO THE NOSE.
Title: Re: BAHNER
Post by: FORKEDUP on February 15, 2008, 03:37:41 PM
damn, i need to find your guys upholstery shops, the ones i have checked with have all been 700+ to recover my seats, 2 buckets and bench, just recover no wood or foam, and one place wants 350.00 just to change the piping to another color, nothing else replaced :banghead:
Title: Re: BAHNER
Post by: 2savage4you on February 15, 2008, 03:55:34 PM
We hand built this and paid $800 to get it uphulstered


Looks killer, im getting All new wood carpet and upohlstered for about $1k

I think thats a good deal ;D

2sav
Title: Re: BAHNER
Post by: Marcsrollin on February 15, 2008, 04:17:07 PM

Looks killer, im getting All new wood carpet and upohlstered for about $1k

I think thats a good deal ;D

2sav

How long is the turn around?
Title: Re: BAHNER
Post by: hotrod56cars on February 15, 2008, 04:26:55 PM
Damnit! I did it backwards!!  :banghead:  :banghead:
[attachimg=#]
Title: Re: BAHNER
Post by: 2savage4you on February 15, 2008, 04:33:01 PM
How long is the turn around?


Last time it was 2 days.

2sav
Title: Re: BAHNER
Post by: pw_Tony on February 15, 2008, 04:56:18 PM
Dude, gotta have white seats. The light blue or mustard yellow base doesn't look good IMHO. How about a white base, with yellow stripes, and blue trim on the edges
Title: Re: BAHNER
Post by: hotrod56cars on February 15, 2008, 05:14:40 PM
 :screwy:
[attachimg=#]
Title: Re: BAHNER
Post by: Luckie Stiff on February 15, 2008, 05:26:49 PM
I kinda like Tony's idea with the white/yellow/blue combo.
Title: Re: BAHNER
Post by: 2savage4you on February 15, 2008, 05:30:07 PM
I kinda like Tony's idea with the white/yellow/blue combo.

Yeah im thinking the same thing ??? tooooo much yellow, it makes me wanna peeeee :screwy:

2sav
Title: Re: BAHNER
Post by: hotrod56cars on February 15, 2008, 05:33:36 PM
Yeah im thinking the same thing ??? tooooo much yellow, it makes me wanna peeeee :screwy:

2sav

LMFAO  ::)

[attachimg=#]

Title: Re: BAHNER
Post by: flytime on February 15, 2008, 05:36:22 PM
Youre getting there Rod. Now make the blue a little darker. The first 2 colors almost made me throw up. ;D
Title: Re: BAHNER
Post by: pw_Tony on February 15, 2008, 05:43:35 PM
Wow Rod you're really good at that shit, do you use some program or something?
Title: Re: BAHNER
Post by: 2savage4you on February 15, 2008, 05:46:05 PM
Wife say's dark blue trim :banghead:

2sav ;D
Title: Re: BAHNER
Post by: hotrod56cars on February 15, 2008, 05:51:53 PM
Adobe Photoshop 7.0, a quite awhile ago friend of mine hooked me up with the program when he built my computer for me. Another friend sat me down at my computer for about a half hour several years ago and showed me some sh!t. Just been playing with the program here and there ever since. But seriously though, I suck at it, pro's can use this program and make it look totaly "real".


Darker?

[attachimg=#]
Title: Re: BAHNER
Post by: 2savage4you on February 15, 2008, 05:53:18 PM
Wife say's YES!!!! Darker

2sav ;)
Title: Re: BAHNER
Post by: flytime on February 15, 2008, 05:54:00 PM
Thats the one Rod. Good job.
Title: Re: BAHNER
Post by: pw_Tony on February 15, 2008, 05:59:43 PM
I personally like square seats myself....

(http://i227.photobucket.com/albums/dd6/pw383426/16Picture_001.jpg)
(http://i227.photobucket.com/albums/dd6/pw383426/P7110023.jpg)
(http://i227.photobucket.com/albums/dd6/pw383426/IMG_3891.jpg)
Title: Re: BAHNER
Post by: flytime on February 15, 2008, 06:01:13 PM
I personally like square seats myself....

(http://i227.photobucket.com/albums/dd6/pw383426/16Picture_001.jpg)
(http://i227.photobucket.com/albums/dd6/pw383426/P7110023.jpg)
(http://i227.photobucket.com/albums/dd6/pw383426/IMG_3891.jpg)

Looks too modern in classic boat to me. Just my .02
Title: Re: BAHNER
Post by: hotrod56cars on February 15, 2008, 06:29:06 PM
Looks too modern in classic boat to me. Just my .02

I agree with this particular Bahner. I think the square seats can look really good though in the right boat.
Title: Re: BAHNER
Post by: hotrod56cars on February 15, 2008, 06:40:23 PM
Darker?

[attachimg=#]
Title: Re: BAHNER
Post by: 2savage4you on February 16, 2008, 09:09:11 AM
Hey Rod thanks man ;)  I dont know what it is but i think its the YELLOW that is throwin me off.... Its hard to come up with a good color combo with the colors at hand :banghead: Sooooooooo.......... im thinking white seats with blue accents ;D   Sound familiar >:D   I think the boat has enough YELLOW in it , it needs some neutral colors....... What do you guy's think ???

2sav
Title: Re: BAHNER
Post by: propless on February 16, 2008, 09:24:02 AM
 How about white seats , blue stripes, yellow trim  ???  That way theres not to much yellow but enough to make it look like it belongs there.
Title: Re: BAHNER
Post by: 2savage4you on February 16, 2008, 05:27:16 PM
Yesturday i decided to get the Bahner striped and cleaned up before it go's in for new upholstery
(http://i223.photobucket.com/albums/dd269/2savage4you/001-17.jpg)
ive never seen so much silicon :o
(http://i223.photobucket.com/albums/dd269/2savage4you/002-8.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-9.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on February 16, 2008, 05:28:51 PM
Today i found out why the bow is sagging
(http://i223.photobucket.com/albums/dd269/2savage4you/001-16.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-7.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-7.jpg)
2sav ::)
Title: Re: BAHNER
Post by: 2savage4you on February 16, 2008, 05:31:05 PM
This is what they used to brace it
(http://i223.photobucket.com/albums/dd269/2savage4you/004-8.jpg)
 So i cut some wood for a bandaide..... it might not have been the right way of doing it , but it worked
(http://i223.photobucket.com/albums/dd269/2savage4you/006-4.jpg)
Had to jack it back up
(http://i223.photobucket.com/albums/dd269/2savage4you/005-8.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on February 16, 2008, 05:34:07 PM
Well i guess after all the years of racing , something is gonna give :o
Heres what i have so far, i will finish it up tomorrow
(http://i223.photobucket.com/albums/dd269/2savage4you/007-6.jpg)
Now the big question , what do i use to seal this up again ??? Im getting new carpet and dont want to have to pull it up if it leaks
(http://i223.photobucket.com/albums/dd269/2savage4you/008-4.jpg)
2sav
Title: Re: BAHNER
Post by: HDriderTH on February 16, 2008, 05:49:55 PM
good job Bahner boy.....
Title: Re: BAHNER
Post by: 2savage4you on February 16, 2008, 05:55:43 PM
good job Bahner boy.....


Thanks HD, now how do i seal it up ???

2sav :banghead:
Title: Re: BAHNER
Post by: pw_Tony on February 16, 2008, 06:22:52 PM
Does it leak? Maybe pour some water in there and see if any drips out. If the bottom is epoxied it shouldn't leak. Is the bottom of the boat covered up the bolts?
Title: Re: BAHNER
Post by: 2savage4you on February 16, 2008, 06:28:35 PM
Its all cracked and brittle sooo...... i  wanna fix it.....i will try the water tomorrow. Who know's   maybe it will grow ;D

2sav
Title: Re: BAHNER
Post by: HDriderTH on February 16, 2008, 09:23:02 PM
Its all cracked and brittle sooo...... i  wanna fix it.....i will try the water tomorrow. Who know's   maybe it will grow ;D

2sav

I've heard you use marine bondo for that shinizle
Title: Re: BAHNER
Post by: Brad @ SCJB on February 17, 2008, 06:50:23 AM
if you want to patch it quick and get it doen with.....marc and i tried using some of that bondo glass when we filled in the gauge holes on the liberty....that stuff is nice....but kicks REAL quick.....make several small batches instead of one big one.

if you got time ...use some of the sea goin poxy putty....the downside is that it takes a day to cure.


how was the left foot pedal mounted? i got a setup like that, but theres nothing to mount the left pedal to. I need some ideas.
Title: Re: BAHNER
Post by: 2savage4you on February 17, 2008, 06:56:25 AM
if you want to patch it quick and get it doen with.....marc and i tried using some of that bondo glass when we filled in the gauge holes on the liberty....that stuff is nice....but kicks REAL quick.....make several small batches instead of one big one.

if you got time ...use some of the sea goin poxy putty....the downside is that it takes a day to cure.


how was the left foot pedal mounted? i got a setup like that, but theres nothing to mount the left pedal to. I need some ideas.

Where do i find the poxy putty online?

I will take a pic of how it was mounted  ;D

Thanks.

2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on February 17, 2008, 07:01:20 AM
CP:

http://www.cpperformance.com/SearchResult.aspx?CategoryID=466

unless your mounting intakes...1 order of this stuff goes a long way.

Title: Re: BAHNER
Post by: 2savage4you on February 17, 2008, 07:05:12 AM
Thanks, i will see if i can get it here first but i kinda doubt it , thats why i wanted the online info ;)
2sav
Title: Re: BAHNER
Post by: GAWnCA on February 17, 2008, 07:06:33 AM
bondo glass....that stuff is nice....but kicks REAL quick.

Brad, you got that right.  Almost cures before you get it mixed. 
Title: Re: BAHNER
Post by: 76 Bonneville on February 17, 2008, 08:53:08 AM
I've bought sea goin poxy putty at my local boat shop. If you dont want to wait for shipping I would check that first, its pretty common stuff.
Title: Re: BAHNER
Post by: pw_Tony on February 17, 2008, 10:03:48 AM
I believe Walmart carries Sea Goin epoxy
Title: Re: BAHNER
Post by: beerjet on February 17, 2008, 10:44:06 AM
Pull the fin out and set it back in with the poxy putty . Hardest part is going to be pulling it out . When that shit is dry . It is in there for good . Dont buy the smallest one they have . It almost wasnt enough for mine .

-beerjet-
Title: Re: BAHNER
Post by: 2savage4you on February 19, 2008, 04:46:06 PM
Got the floor all ready for carpet. It looked like they used silicon on the whole floor. Tomorrow i will tackle the bilge area , pull the line and rails. Im hoping it will clean up good enough to just lay down some resin but if not, it gets the bed liner........F-IT
(http://i223.photobucket.com/albums/dd269/2savage4you/003-13.jpg)
Put the bulkhead back in today. I found the bow eye was ready to fall out, Man what a bitch , and im closter fobick (sp) :banghead: But its tight again.
(http://i223.photobucket.com/albums/dd269/2savage4you/003-12.jpg)
I forgot to put the floaty things back in before glassing it in
(http://i223.photobucket.com/albums/dd269/2savage4you/004-12.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on February 19, 2008, 04:48:21 PM
Hey Brad im thinking about having some stickers made that say " NO STEP" for my fiberglass fenders..

Have any ideas ???
(http://i223.photobucket.com/albums/dd269/2savage4you/005-10.jpg)
2sav ::)
Title: Re: BAHNER
Post by: UNDONE on February 19, 2008, 05:21:33 PM
WOW you moved really quick on this! The patch jobs look pretty darned good. Good luck with that fin, hope you're having fun, looks like we'll be seeing you in June.
Title: Re: BAHNER
Post by: 2savage4you on February 19, 2008, 06:02:12 PM
Hey thanks man ;) Im like a kid in the candy store with this boat, i just love the shit out of it.(is that wrong,do i need therapy) ??? But anyway it will be there. it wont be the fastest or the best looking boat, but it will be there, if i can help it :banghead:

2sav
Title: Re: BAHNER
Post by: flytime on February 19, 2008, 08:22:38 PM
Keep up the good work 2sav. Now finish this one would ya :o
Title: Re: BAHNER
Post by: FORKEDUP on February 19, 2008, 08:23:28 PM
looking good, cant wait to see it in parker
Title: Re: BAHNER
Post by: 2savage4you on February 20, 2008, 11:46:27 AM
Didnt want  to come out...... :banghead:
(http://i223.photobucket.com/albums/dd269/2savage4you/001-19.jpg)
I won ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/002-10.jpg)
 filled the boat with water........ No bubbles so that means it dont leak RIGHT :o
(http://i223.photobucket.com/albums/dd269/2savage4you/005-11.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on February 20, 2008, 11:49:00 AM
Another no leaky
(http://i223.photobucket.com/albums/dd269/2savage4you/004-13.jpg)
and the bottom
(http://i223.photobucket.com/albums/dd269/2savage4you/006-6.jpg)
Soooooooooo........ should i just leave it alone and continue on or do you think i need to yank it out and re seal it ???

2sav
And you guy's thought i was just playing on the computer ;D
Title: Re: BAHNER
Post by: 2savage4you on February 20, 2008, 01:11:39 PM
Anybody ???

2sav
Title: Re: BAHNER
Post by: beerjet on February 20, 2008, 01:13:11 PM
Leave it .....  :D

-beerjet-
Title: Re: BAHNER
Post by: COORS HEAVY on February 20, 2008, 01:19:18 PM
I AGREE  BUT MAYBE IF ANYTHING SINCE YOU DO HAVE THE AREA CLEANED UP A COAT OF RESIN TO SEAL IT
Title: Re: BAHNER
Post by: hotrod56cars on February 20, 2008, 01:20:01 PM
I don't see how leaving it could hurt anything, it doesn't leak, leave it.
Title: Re: BAHNER
Post by: 2savage4you on February 20, 2008, 01:25:57 PM
 :-* :-* :-*
Thank you guy's  I gotto tell ya, i was scared shitlesss to take it out........ My track record hasnt been the best this last year ;)

Yes im going to glass a new cross piece in there and do it good.......... I love you man!!!!!!


2sav 
Title: Re: BAHNER
Post by: beerjet on February 20, 2008, 01:28:39 PM
:-* :-* :-*
Thank you guy's  I gotto tell ya, i was scared shitlesss to take it out........ My track record hasnt been the best this last year ;)

Yes im going to glass a new cross piece in there and do it good.......... I love you man!!!!!!


2sav 
I didnt think you would have been able to get it out anyways . Most people usually beat the hell out of them forever and then give up and cut them fukers off .  ;D

-beerjet-
Title: Re: BAHNER
Post by: 2savage4you on February 23, 2008, 06:13:00 PM
I filled all the upholstery holes and what nots in the stringers today, im so tired of fiberglass :banghead:
(http://i223.photobucket.com/albums/dd269/2savage4you/001-20.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-14.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-14.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on February 23, 2008, 06:16:05 PM
(http://i223.photobucket.com/albums/dd269/2savage4you/005-12.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/006-7.jpg)
tomorrow it gets a bath and then a acetone wipe down, and then the bilge gets painted. and then i can install the rails again. and then one day at band camp :o

2sav
Title: Re: BAHNER
Post by: 2savage4you on February 23, 2008, 06:18:05 PM
soon as im done with the bilge area im going to drop this 454 in ;D and then work from the dash back. going to install new guages and so on ;)
(http://i223.photobucket.com/albums/dd269/2savage4you/009-8.jpg)
2sav
Title: Re: BAHNER
Post by: OC2Vegas on February 23, 2008, 06:46:26 PM
holy crap sav might actually finish it! :sly:
Title: Re: BAHNER
Post by: propless on February 23, 2008, 07:01:40 PM
 
holy crap sav might actually finish it! :sly:
I have to admit, it looks like your right  :o :o...   Looking good 2sav,  just dont get distracted, again  >:D
Title: Re: BAHNER
Post by: hotrod56cars on February 23, 2008, 09:34:11 PM
... im so tired of fiberglass :banghead:
2sav

You wouldn't be if you finished and kept 1 boat!
Title: Re: BAHNER
Post by: flytime on February 23, 2008, 09:35:12 PM
 ;D
Title: Re: BAHNER
Post by: 2savage4you on February 24, 2008, 06:13:07 AM
You wouldn't be if you finished and kept 1 boat!

And how many boats have you gone through,   Huh......

2sav ;D
Title: Re: BAHNER
Post by: hotrod56cars on February 24, 2008, 09:26:02 AM
And how many boats have you gone through,   Huh......

2sav ;D

I haven't counted, but it was probably around 10 last year. But the one boat that was purchased as a keeper before all of those 10 I still have and am still keeping.  ;)  Most were purchased with known hull/stringer problem's and I never planned on fixing them. Probably the only one I purchased with known wood rot problem's that I planned on fixing at the time of purchase would be the Hawiian I got from Ralph, I never intended on keeping that one either, I planned on fixing it and resaling it, but I got intimidated on the wood rot (at that point I hadn't tried repairing wood rot yet) and regretfully resold it instead.
Title: Re: BAHNER
Post by: 2savage4you on February 24, 2008, 02:59:48 PM
A little more progress today . Now she is ready for carpet...
http://s223.photobucket.com/albums/dd269/2savage4you/?albumview=slideshow
2sav
Title: Re: BAHNER
Post by: HDriderTH on February 24, 2008, 05:05:48 PM
You go Bahnerboy, paint the motor and drop it tomorrow?
Title: Re: BAHNER
Post by: 2savage4you on March 10, 2008, 02:23:29 PM
Is $750 the norm for carpet :banghead:

I might have to do it myself ???
2sav
Title: Re: BAHNER
Post by: Blue on March 10, 2008, 03:09:52 PM
Damn what are you getting a 50 year warranty berber??? Do it yourself for $200. If you have a compressor go get a cheap gun for spray glue.
Title: Re: BAHNER
Post by: Ralph Brunt on March 10, 2008, 03:11:18 PM
Damn what are you getting a 50 year warranty berber??? Do it yourself for $200. If you have a compressor go get a cheap gun for spray glue.
yeah what blue said
Title: Re: BAHNER
Post by: HDriderTH on March 10, 2008, 04:32:28 PM
I did my jet for about $50. Got carpet from L&L marine, 30 sumpthin  and glue from West Marine $20, still have most of it left.............Hell I'll do it for $650
Title: Re: BAHNER
Post by: Josh@JBP on March 10, 2008, 05:47:24 PM
Is $750 the norm for carpet :banghead:

I might have to do it myself ???
2sav
Do they give you a reach arround with that price ???  For that price they ought to hem the edges and put snaps in for quick removal like the roll bar boats.

Do it your self: http://www.boatcarpetbuys.com/boatcarpet-type/321-8--Wide-16oz-Marine-Carpet.asp Just one of the places I found on a google search
Title: Re: BAHNER
Post by: 2savage4you on March 10, 2008, 07:33:51 PM
Well i finally put the oil pump on ;D Just one step closer to getting r done :banghead:
(http://i223.photobucket.com/albums/dd269/2savage4you/001-9.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-6.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-7.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-6.jpg)
2sav
Title: Re: BAHNER
Post by: pw_Tony on March 10, 2008, 07:47:16 PM
What's up with the hose out the oil pan?
Title: Re: BAHNER
Post by: 2savage4you on March 10, 2008, 08:00:50 PM
What's up with the hose out the oil pan?

Well if you had a jetboat , you would know.............its how you change the oil :o
I hook up my little pump and suck it all out ;D

2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on March 10, 2008, 08:07:02 PM
What's up with the hose out the oil pan?

oil return for the massive turbo system hes gunna put on it.  ;D
Title: Re: BAHNER
Post by: pw_Tony on March 10, 2008, 08:15:21 PM
Well if you had a jetboat , you would know.............its how you change the oil :o
I hook up my little pump and suck it all out ;D

2sav

Good idea, I'm used to draining out the bilge. I'm going to have to pick up a pump now  :o
Title: Re: BAHNER
Post by: 2savage4you on March 10, 2008, 08:27:47 PM
Good idea, I'm used to draining out the bilge. I'm going to have to pick up a pump now  :o


Just borrow mine ;D  No need to buy one.................

oil return for the massive turbo system hes gunna put on it.  ;D



  Sssshhhhh its a secret ;)

2sav
Title: Re: BAHNER
Post by: BOOST on March 10, 2008, 08:32:11 PM
Good idea, I'm used to draining out the bilge. I'm going to have to pick up a pump now  :o
How hard is it to clean that mess ?
Title: Re: BAHNER
Post by: pw_Tony on March 10, 2008, 08:33:48 PM
How hard is it to clean that mess ?

It's not like my oil has chunks in it lol, a little gas and water and you're good
Title: Re: BAHNER
Post by: crewchief22 on March 10, 2008, 09:54:09 PM
 O0 anybody need a light?            j/k
Title: Re: BAHNER
Post by: The Chaz on March 11, 2008, 10:05:32 PM
It's not like my oil has chunks in it lol, a little gas and water and you're good

What he really meant to say is just pull the bildge plug and drive it around for a while  >:D
Title: Re: BAHNER
Post by: 2savage4you on March 13, 2008, 02:00:19 PM
Well i just talked to my upholstery guy and he said that we can work something out for around a thousand.........so i might be getting full interior and carpet  ;D  After all he said this is the third boat im doing for you, i got to cut you a break sooner or later ;)

I never should have went to the other upholstery shop for estimates, I kinda feel guilty now ???

I will post pics when it happens ::)

2sav  This shits coming together bitches  >:D
Title: Re: BAHNER
Post by: 2savage4you on March 15, 2008, 06:52:11 PM
Just another step closer to getting it wet :o
(http://i223.photobucket.com/albums/dd269/2savage4you/001-12.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-9.jpg)
2sav ;D
Title: Re: BAHNER
Post by: hotrod56cars on March 15, 2008, 06:56:09 PM
Looks good 2Sav.
Title: Re: BAHNER
Post by: 2savage4you on March 15, 2008, 06:58:30 PM
Were going to eliminate the white upholstery idea and go black with dark blue accents ;)

Im getting to where i cant stand the white :banghead:

2sav
Title: Re: BAHNER
Post by: hotrod56cars on March 15, 2008, 07:19:28 PM
Your asss is going to literaly burn with a black interior.
Title: Re: BAHNER
Post by: 2savage4you on March 15, 2008, 07:22:20 PM
Your asss is going to literaly burn with a black interior.

Thats what the upholstery shop said! but as long as we keep towels on it, should be ok ;D

I just dont want white :banghead:
2sav
Title: Re: BAHNER
Post by: The Chaz on March 15, 2008, 07:31:09 PM
Mine is light Grey and gets smokin hot on a cool day :screwy:
Title: Re: BAHNER
Post by: 2savage4you on March 16, 2008, 01:23:45 PM
Twisties won. Sooooooooo..........the wife is rubbing it in :banghead:  so i installed them and you know what ???

They look good ;D and they are in really good shape.
(http://i223.photobucket.com/albums/dd269/2savage4you/001-13.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-10.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-9.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-10.jpg)
Thanks for all who voted ;)
2sav
Title: Re: BAHNER
Post by: bkplesh on March 16, 2008, 03:49:02 PM
Your asss is going to literaly burn with a black interior.
x2 and white is easy to clean ;D
Title: Re: BAHNER
Post by: GAWnCA on March 16, 2008, 04:12:42 PM
2Sav - it's looking sexy but I have to agree, black will fry you man.  Go white with colored welting.
Title: Re: BAHNER
Post by: BOOST on March 16, 2008, 04:23:56 PM
2Sav - it's looking sexy but I have to agree, black will fry you man.  Go white with colored welting.
Project looking good,white the why to go good luck
Title: Re: BAHNER
Post by: 2savage4you on March 16, 2008, 05:02:14 PM
Yeah the black will get hot as hell but i need something other than white :banghead: It stands out WAY to much and is starting to annoy me ;D.....

After i get my buckets, i can talk to the upholsterer and go from there ???

Who knows whats gonna happen , i got plenty of time

2sav
Title: Re: BAHNER
Post by: hotrod56cars on March 16, 2008, 05:43:54 PM
white white white white white  :o
Title: Re: BAHNER
Post by: 2savage4you on March 16, 2008, 05:47:12 PM
white white white white white  :o

 :banghead: What did i ever do to you :banghead: :screwy:

2sav ;D
Title: Re: BAHNER
Post by: The Chaz on March 16, 2008, 10:22:55 PM
Are you keeping the color scheme?  Might look cool if you match with light yellow highlighted with Blue ???
Title: Re: BAHNER
Post by: Nordie on March 16, 2008, 10:30:34 PM
Are you keeping the color scheme?  Might look cool if you match with light yellow highlighted with Blue ???


thats what i was thinking, bet it would look cool
Title: Re: BAHNER
Post by: pw_Tony on March 16, 2008, 11:22:05 PM
That rail kit looks sweeet
Title: Re: BAHNER
Post by: 2savage4you on March 18, 2008, 06:22:33 PM
Well after looking at Ralphs liberty project and the floor he put in it , that made me get off my ass and do one myself ;D now all i have to do is order my seats and carpet....I will do the carpet myself and save a bundle  ;)
Before
(http://i223.photobucket.com/albums/dd269/2savage4you/001-14.jpg)
during
(http://i223.photobucket.com/albums/dd269/2savage4you/005-7.jpg)
and after
(http://i223.photobucket.com/albums/dd269/2savage4you/008-5.jpg)
It will look alot better once i get the carpet installed ( still have to order it ) :o
And thanks again Ryan, this would have been a bitch , but your help made it an easy install ;)
2sav
Title: Re: BAHNER
Post by: pw_Tony on March 18, 2008, 06:24:16 PM
Where's the half dollar?  ;)
Title: Re: BAHNER
Post by: 2savage4you on March 18, 2008, 06:29:15 PM
Where's the half dollar?  ;)

Your daddy wasnt here ;D
2sav
Title: Re: BAHNER
Post by: Ralph Brunt on March 18, 2008, 07:00:20 PM
WOW thats looks great  ;) ;D
Title: Re: BAHNER
Post by: ryanbrindle on March 18, 2008, 07:04:18 PM
Dont let him lie to ya!! I just mainly stood around for support!! Hey 2sav thanks for helping with that crank today.
Title: Re: BAHNER
Post by: pw_Tony on March 18, 2008, 08:32:13 PM
Dont let him lie to ya!! I just mainly stood around for support!! Hey 2sav thanks for helping with that crank today.

That's the way I felt over there sometimes too lol.... get it done right now attitude  ;D
Title: Re: BAHNER
Post by: 2savage4you on March 27, 2008, 02:28:10 PM
That's the way I felt over there sometimes too lol.... get it done right now attitude  ;D

You must be talking about your daddys boat :o J/K

Well it looks like im walking backwards again, causing more work for myself :banghead: I put the bulkhead in to far forward so the bow was sagging after i installed the new gauges /steering ext & wheel...... But i almost got it fixed.....Im cutting a brand new Bulkhead and adding some small braces under the deck ;) This has set me back a week or more :banghead:

On a good note i received my seats/brackets, and my carpet.   But for some reason the carpet dont fit right..... I just hope i have enough ;D
2sav >:D
(http://i223.photobucket.com/albums/dd269/2savage4you/001-15.jpg)
Title: Re: BAHNER
Post by: KonaCole on March 27, 2008, 03:10:53 PM
where did you get your carpet?
Title: Re: BAHNER
Post by: 2savage4you on March 27, 2008, 03:21:23 PM
where did you get your carpet?

http://www.boatcarpetbuys.com/

I got everything for $150 shipped, Carpet and 1 gallon of glue ;D

2sav
Title: Re: BAHNER
Post by: propless on March 27, 2008, 07:39:39 PM
 But for some reason the carpet dont fit right..... I just hope i have enough ;D
2sav >:D
Damm universal carpet kits  :banghead: , thats how mine fit too  ;D
Title: Re: BAHNER
Post by: HDriderTH on March 27, 2008, 07:56:52 PM
lay that shit out in the sun for a day, keep stretchin it out
Title: Re: BAHNER
Post by: 2savage4you on March 27, 2008, 08:06:26 PM
lay that shit out in the sun for a day, keep stretchin it out

I was thinking about that today, im glad its warming up ;) Im going to have a shit load left over.........Hey another project yeah thats it ;D

Its going to be at least another week before i get to the carpet :banghead: Should be even warmer ;)
2sav
Title: Re: BAHNER
Post by: The Chaz on March 27, 2008, 09:57:09 PM
Thats where I got my carpet, I like it so far :D
Title: Re: BAHNER
Post by: 702fairlanedave on March 28, 2008, 12:53:11 AM
hey sav this is the guy that bought ford mounts who,s doing your upolstry and your boat looks good
Title: Re: BAHNER
Post by: 2savage4you on March 28, 2008, 10:41:59 AM
hey sav this is the guy that bought ford mounts who,s doing your upolstry and your boat looks good

Hey Dave, how ya been ?  Hey guy's he's another Ford lover :banghead: J/k

Don's custom upholstery on Marina  Right By my house ;) Sort of.........

How's that project coming along? Good to see you make it over here.....These guy's are  a great bunch of people.....you should come on down to parker with us in June...Its gonna be a blast

2sav
Title: Re: BAHNER
Post by: 702fairlanedave on March 29, 2008, 09:02:29 AM
so far i have replaced floor and stringers still need to glass top of floor picked up a 460 have mounts and exh logs but need a oil pan
Title: Re: BAHNER
Post by: 2savage4you on April 01, 2008, 09:05:47 PM
SOLD

2sav :'(
Title: Re: BAHNER
Post by: 82daytona on April 01, 2008, 09:13:43 PM
wtf :-\
Title: Re: BAHNER
Post by: Luckie Stiff on April 01, 2008, 09:14:32 PM
SOLD

2sav :'(

WTF do you mean SOLD? We need answers man!
Title: Re: BAHNER
Post by: UNDONE on April 01, 2008, 09:21:05 PM
You sold your bahner now????????????????
Title: Re: BAHNER
Post by: 82daytona on April 01, 2008, 09:24:43 PM
wtf 2sav dont keep us waiting  ::) :banghead:
Title: Re: BAHNER
Post by: propless on April 01, 2008, 11:01:39 PM
 
SOLD

2sav :'(
Im not falling for this one 2sav  ;D
Come on guys ,  think what day it is  ::) .
Title: Re: BAHNER
Post by: pw_Tony on April 01, 2008, 11:28:59 PM
  Im not falling for this one 2sav  ;D
Come on guys ,  think what day it is  ::) .

He's got a point
Title: Re: BAHNER
Post by: Brad @ SCJB on April 01, 2008, 11:30:12 PM
He's got a point

yeah, but this is 2sav we're talkin about here.  :-\
Title: Re: BAHNER
Post by: 82daytona on April 02, 2008, 06:47:02 AM
he fooled me
Title: Re: BAHNER
Post by: 702fairlanedave on April 02, 2008, 03:26:47 PM
I HOPE HE,S TALKING ABOUT HIS OIL PAN NOT HIS BOAT
Title: Re: BAHNER
Post by: 2savage4you on April 06, 2008, 06:41:29 PM
Well i wanted to have more done before i posted more pics , but i keep running into small problems :banghead: and im still waiting on parts............ and so on
Ryan Brindle and i did the carpet a few days ago, tried to install the tanks and rail kit but not feeling to good today :( I still have to trim some carpet in the bulkhead.

I was supposed to have all my upholstery ready to go but i have not even cut out my panels yet......
Im getting burned out i think :screwy:
Im hoping by the end of the week i will have the pump, upholstery,rail kit,tanks and engine back in it.
But who know's.
(http://i223.photobucket.com/albums/dd269/2savage4you/001-18.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-13.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-13.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on April 06, 2008, 06:43:39 PM
If your wondering what that paper is doing behind my supports, they were still tacky from the resin and i ran out of patience.......It will all come out tomorrow when i put the tanks in
(http://i223.photobucket.com/albums/dd269/2savage4you/002-13.jpg)
2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on April 06, 2008, 07:36:57 PM
looks good....really good. keep truckin.
Title: Re: BAHNER
Post by: pw_Tony on April 06, 2008, 08:05:03 PM
Looks good, so when you putting the 460 in?  ;D
Title: Re: BAHNER
Post by: flytime on April 06, 2008, 08:11:26 PM
Lookin good 2sav. Dont get burned out man. Your gettin close now! Keep up the good work.
Title: Re: BAHNER
Post by: Luckie Stiff on April 06, 2008, 08:35:42 PM
Hot Damn! Looking good man, keep it up, take your time, relax, and get it done. Looks sweet
Title: Re: BAHNER
Post by: BOOST on April 06, 2008, 08:54:15 PM
Hot Damn! Looking good man, keep it up, take your time, relax, and get it done. Looks sweet
x 2
Title: Re: BAHNER
Post by: FORKEDUP on April 06, 2008, 09:04:03 PM
that looks f'n great, keep it up and keep thinking about the end result, no burn outs :)
Title: Re: BAHNER
Post by: OC2Vegas on April 06, 2008, 09:31:33 PM
Fricken sweet!
Title: Re: BAHNER
Post by: hotrod56cars on April 06, 2008, 11:59:59 PM
... Im getting burned out i think :screwy:
...
2sav

Don't get bummed out 2Sav, you're doing great work... keep it up. If you have to: sit behind your computer, watch some of the v-drive video clips, drink your favorite beer, and then go work on the boat... your boat is looking good  :o
Title: Re: BAHNER
Post by: The Chaz on April 07, 2008, 08:30:51 PM
Wow!  Nice progress.  You are almost there.  I had to make list of things in my life that made me extremely happy (in a writing class at school) today.  Near the top of my list was my first ride in my boat after doing only some of the things you have done to get it in the water.  I went from an obsession to a love affair that Sunny spring day at Lake Elsinore ;D
Your hard work will pay off, and soon from the looks of it.
Title: Re: BAHNER
Post by: 2savage4you on April 07, 2008, 08:41:00 PM
Thanks guy's.  I got the panels cut and dropped at the upholstery shop, rail kit and tanks back in it today.....Why is it when you think whatever your going to do will be simple, it turns into a bitch :banghead:

2sav ;D
Title: Re: BAHNER
Post by: 429heads on April 07, 2008, 09:08:54 PM
LQQKING good Lets see  Glass man , Carpet layer, Motor man, Rigger , YOUR a BOAT BUILDER. dam sav new gig
                                               SAVAGE BOAT REPAIR
                                                 :banghead: :mad:
Title: Re: BAHNER
Post by: GAWnCA on April 07, 2008, 09:13:44 PM
If your wondering what that paper is doing behind my supports, they were still tacky from the resin and i ran out of patience.......It will all come out tomorrow when i put the tanks in
(http://i223.photobucket.com/albums/dd269/2savage4you/002-13.jpg)
2sav

Hey 2Sav,  Do they make that carpet in a dark blue?  That looks nice!
Title: Re: BAHNER
Post by: OC2Vegas on April 07, 2008, 09:14:35 PM
Thanks guy's.  I got the panels cut and dropped at the upholstery shop, rail kit and tanks back in it today.....Why is it when you think whatever your going to do will be simple, it turns into a bitch :banghead:

2sav ;D

Because it has to do with a boat!
Title: Re: BAHNER
Post by: 2savage4you on April 09, 2008, 07:00:32 PM
little more progress today, Tom @JBP sent me my gaskets and droop ;D......Thanks Tom...
Got the pump installed  and battery mount done. Not much today but its something.
(http://i223.photobucket.com/albums/dd269/2savage4you/001-20.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-15.jpg)
went to put on the droop and found a little problem.
(http://i223.photobucket.com/albums/dd269/2savage4you/003-15.jpg)
So do i cut the cone or the inside of the droop?? I dont want to disrupt the flow ???
(http://i223.photobucket.com/albums/dd269/2savage4you/002-16.jpg)
2sav
Title: Re: BAHNER
Post by: hotrod56cars on April 09, 2008, 08:20:25 PM
Why are you running the two wedges with the droop? You have inside info??

I have no idea which one you cut, but I bet Tom knows. I've never seen a cone like that before.

Looking good...
Title: Re: BAHNER
Post by: Brad @ SCJB on April 09, 2008, 10:18:05 PM
im not sure what im looking at....

youre saying the cone on the bowl is hitting the vane in the droop? is that an agressor droop?

i was told to cut the vane out of the agressor droop i am using. it serves no purpose and was only put there to offset the patent protection on the berk droop. dont know if that holds any water, but its what i was told.
Title: Re: BAHNER
Post by: Josh@JBP on April 10, 2008, 10:45:58 AM
You can notch the divider a bit. Or you can get an original aluminum Berkeley plug (shorter).

As far as the divider thats an argument right up there with Ford/Chevy etc....   I was told by not one but two different pump manufactures that it is in there to help equalize pressure differencials or something to that effect.  I believe they also stated that the vertical divider, was not only easier to cast but also help more than the horizontal one.  It also further helps to straighten out the flow.
Title: Re: BAHNER
Post by: wizard612 on April 10, 2008, 11:23:34 AM
I don't think I'm giving up any 30 year old trade secrets concerning two wedges. If you have a 12JR pump they are double drilled and if you have 2-6 degree wedges you can have any combination of 12 degrees up or down by 1 degree steps by rotating the wedges one clockwise one counterclockwise. Someone I remember even engraved them so you could just match up the marks for a specific angle.  Worked slick when you were adjusting to water conditions at the track. It would take some special length bolts though depending on what amount of wedge you needed.
Title: Re: BAHNER
Post by: Brad @ SCJB on April 10, 2008, 11:45:15 AM
You can notch the divider a bit. Or you can get an original aluminum Berkeley plug (shorter).

As far as the divider thats an argument right up there with Ford/Chevy etc....   I was told by not one but two different pump manufactures that it is in there to help equalize pressure differencials or something to that effect.  I believe they also stated that the vertical divider, was not only easier to cast but also help more than the horizontal one.  It also further helps to straighten out the flow.

well, in that case, i will be leaving mine in  ;)
Title: Re: BAHNER
Post by: 2savage4you on April 10, 2008, 11:46:48 AM
Well i have to do something, and it looks like im going to notch it a bit. 3/4-1" Is that too much?

2sav
Title: Re: BAHNER
Post by: Josh@JBP on April 10, 2008, 12:30:26 PM
Well i have to do something, and it looks like im going to notch it a bit. 3/4-1" Is that too much?

2sav
Just see how much you are deficiant and cut a v shape out of the middle of the divider, Error on the side of caution and cut it a lil  big, incase you change wedges later or what not.   If memory serves me Aggressors came that way.
Title: Re: BAHNER
Post by: 2savage4you on April 10, 2008, 07:16:32 PM
Droop is on the boat ;D as a mock up only............i forgot to order the gaskets :banghead:
(http://i223.photobucket.com/albums/dd269/2savage4you/015-4.jpg)
I notched a "v" in it like Josh said, Thanks Josh ;)  I also lost a wedge.
(http://i223.photobucket.com/albums/dd269/2savage4you/017-1.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/016.jpg)
2sav
Title: Re: BAHNER
Post by: hotrod56cars on April 10, 2008, 07:37:24 PM
2Sav I'm surprised that you would withhold top secret info. What's up with the 2 now 1 wedge?  ;D
Title: Re: BAHNER
Post by: 2savage4you on April 10, 2008, 07:50:30 PM
2Sav I'm surprised that you would withhold top secret info. What's up with the 2 now 1 wedge?  ;D

My studs weren't long enough to use both wedges and the droop ;)
2sav
Title: Re: BAHNER
Post by: The Chaz on April 10, 2008, 09:28:33 PM
My studs weren't long enough to use both wedges and the droop ;)
2sav

That sounds like something a girl might tell you >:D
Title: Re: BAHNER
Post by: hotrod56cars on April 10, 2008, 09:36:19 PM
My studs weren't long enough to use both wedges and the droop ;)
2sav

You see, that's my problem, always posting sh!t I shouldn't.  >:D   :-*
Title: Re: BAHNER
Post by: Josh@JBP on April 11, 2008, 10:23:44 AM
Droop is on the boat ;D as a mock up only............i forgot to order the gaskets :banghead:
??? bummer,  typically we send at least one with the droop.  We'll drop a couple in an envolope for ya.
Title: Re: BAHNER
Post by: OC2Vegas on April 11, 2008, 03:03:07 PM
??? bummer,  typically we send at least one with the droop.  We'll drop a couple in an envolope for ya.

You guys need to get your crap together before my pump gets there!  ;D
Title: Re: BAHNER
Post by: 2savage4you on April 11, 2008, 03:48:02 PM
??? bummer,  typically we send at least one with the droop.  We'll drop a couple in an envolope for ya.

That would be bitchen..............THANKS ;D

2sav
Title: Re: BAHNER
Post by: 2savage4you on April 14, 2008, 01:52:27 PM
Well its balls to the walls boy's , got to get this Bahner done............ I ran into a problem with the flexplate, The weight hits the motorplate when its tightened up. Is there a special one i should be using with a rail kit?

Anyone ::)

2sav
(http://i223.photobucket.com/albums/dd269/2savage4you/001-22.jpg)
Title: Re: BAHNER
Post by: Ralph Brunt on April 14, 2008, 01:55:44 PM
Well its balls to the walls boy's , got to get this Bahner done............ I ran into a problem with the flexplate, The weight hits the motorplate when its tightened up. Is there a special one i should be using with a rail kit?

Anyone ::)

2sav
(http://i223.photobucket.com/albums/dd269/2savage4you/001-22.jpg)
i cant see it at work but is it on back wards?
Title: Re: BAHNER
Post by: 2savage4you on April 14, 2008, 01:58:16 PM
I will put it in the gallery....And no its not backwards ;D
2sav
Title: Re: BAHNER
Post by: 2savage4you on April 14, 2008, 03:25:50 PM
I think i figured it out....... I put the starter on first then the motorplate and then flexplate.
I took the starter off and BAM it spins without hitting anything......... so i might need to notch out the motorplate a little more to fit the starter right? Or pick up a high torque..Its the cone on the starter that wont fit right in the plate,so it bowed it out

NO MO SHORTCUTS :banghead: :banghead: :banghead: :banghead:
2sav ;D
Title: Re: BAHNER
Post by: OC2Vegas on April 14, 2008, 03:41:28 PM
Get 'er done brotha!
Title: Re: BAHNER
Post by: 2savage4you on April 14, 2008, 06:11:59 PM
Well i got the flex plate all done and installed again, dont hit shit now ;) Its truly amazing what happens when you pay attention and have a grinder in you'r hand ;D....IT FITS.....


Ok now for the drive shaft.....The blue one came with the boat but im thinking of using one a little longer so i can move the engine forward.....What do you guys think ???
(http://i223.photobucket.com/albums/dd269/2savage4you/002-18.jpg)
2sav
Title: Re: BAHNER
Post by: 429heads on April 14, 2008, 06:15:29 PM
 Rape a Rope a round it and pull start it :mad: , your youn and Strong, go for it. LQQKs GQQD  :banghead:
Title: Re: BAHNER
Post by: Brad @ SCJB on April 14, 2008, 06:29:46 PM
stick with one of the 2 middle ones....the fact they seperate into 2 pieces makes it easy to remove the driveline without pulling the motor....which is handy when tuning on the trailer...(poor mans jetaway)
Title: Re: BAHNER
Post by: Ralph Brunt on April 14, 2008, 06:35:03 PM
so i can move the engine forward.....What do you guys think ???
(http://i223.photobucket.com/albums/dd269/2savage4you/002-18.jpg)
2sav
if you move it forward just pay attention to the angle, it may change. I dont think it would change much but, just check it before you drill new holes
Title: Re: BAHNER
Post by: hotrod56cars on April 14, 2008, 08:28:42 PM
stick with one of the 2 middle ones....the fact they seperate into 2 pieces makes it easy to remove the driveline without pulling the motor....which is handy when tuning on the trailer...(poor mans jetaway)

X2, definately!
Title: Re: BAHNER
Post by: FORKEDUP on April 14, 2008, 08:32:35 PM
i will have to agree  my driveline is similar to the middle one, and it makes it nice for removal as brad said
Title: Re: BAHNER
Post by: crewchief22 on April 14, 2008, 11:47:29 PM
Mine is like the one on the right, what a b*tch it was to replace the joints.

If I had a choice I would go with one of the center ones.

Just be sure to recheck/retighten all mounting bolts after running it the first time (I found the bolts on Brads loose on Saturday, they almost got missed).
Title: Re: BAHNER
Post by: 2savage4you on April 15, 2008, 06:34:49 PM
??? bummer,  typically we send at least one with the droop.  We'll drop a couple in an envolope for ya.


Got them today ;D  I love JBP...... :-*

Thanks.
2sav
Title: Re: BAHNER
Post by: 2savage4you on April 17, 2008, 04:24:33 PM
Well i finally got the bulkhead finished.....Pics are kinda blurry, i call it Bud Light ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/003-18.jpg)
And a little more storage space, I stole it from the ol'lady's van. think she will notice it gone ???
(http://i223.photobucket.com/albums/dd269/2savage4you/004-18.jpg)
and more
(http://i223.photobucket.com/albums/dd269/2savage4you/007-8.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/008-9.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on April 17, 2008, 04:27:37 PM
Ive come to a conclusion that the scoop is ugly and has to go :banghead:
(http://i223.photobucket.com/albums/dd269/2savage4you/012-4.jpg)
Got the drive shaft in , engine bolted down and now i have to take the drive shaft back out and replace the u joints. Just because.......
(http://i223.photobucket.com/albums/dd269/2savage4you/009-6.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/010-5.jpg)
Its getting closer ;D
2sav
Title: Re: BAHNER
Post by: propless on April 17, 2008, 05:00:37 PM
 Looks great 2sav !!!  I like the idea for storage, I have one of those sitting in my parts pile too  ;D

 re the scoop , I have one of those things on mine and your right, they are a little ugly  :-\ .
Title: Re: BAHNER
Post by: OC2Vegas on April 17, 2008, 05:04:17 PM
That cargo net is a damn-tastic idea! ;D
Title: Re: BAHNER
Post by: 2savage4you on April 17, 2008, 05:15:41 PM
That cargo net is a damn-tastic idea! ;D

Yeah , and its stolen ;D

2sav
Title: Re: BAHNER
Post by: HDriderTH on April 17, 2008, 05:27:46 PM
shit, looks like yer 'bout done...nice work
Title: Re: BAHNER
Post by: pw_Tony on April 17, 2008, 06:47:06 PM
shit, looks like yer 'bout done...nice work
Parker parker parker.....  ;D
Title: Re: BAHNER
Post by: 2savage4you on April 17, 2008, 07:33:47 PM
shit, looks like yer 'bout done...nice work

Brother , i still got a long way to gooooooooo............ All this little shit is killing me :banghead:

2sav
Title: Re: BAHNER
Post by: FORKEDUP on April 17, 2008, 08:06:47 PM
lookin good 2sav, keep it up and parker will be no problem :), did you get the gasket that you needed?
Title: Re: BAHNER
Post by: 2savage4you on April 17, 2008, 08:14:24 PM
lookin good 2sav, keep it up and parker will be no problem :), did you get the gasket that you needed?

Um no, i used Black rtv silicon.  I went to the parts house and they looked at me like i was stupid ???
Gaskets are everywhere's online but not in Bullhead :banghead:

Besides Terry said he dont even use a gasket, soooo......... i put 2 and 2 together and used silicon ;D
Im trying to get this bitch done, i cant wait till June..
2sav ;)
Title: Re: BAHNER
Post by: 2savage4you on April 19, 2008, 07:16:04 PM
 The upholstery guy called today and said its all done ;D  But he said he needs the other seat to add foam to it ??? Am i wrong but i thought the foam was added to the seat cover , not the seat itself. So i guess when i take off the cover there will still be foam in the seat.............Is this the right way guy's??  I have a feeling i might not be happy with this job :banghead:

Well i ran out of money so i cant buy any parts , but i had a lot of rubbing compound and wax ;D

And only 2 beers :'(
It really shines now.......
(http://i223.photobucket.com/albums/dd269/2savage4you/001-24.jpg)
2sav
Title: Re: BAHNER
Post by: HDriderTH on April 19, 2008, 07:42:02 PM
My guy glued 1-1/2 foam inside the buckets.....
Title: Re: BAHNER
Post by: crewchief22 on April 19, 2008, 07:59:43 PM
Most upholstery will only have a thin piece of foam attached to the cover, most of the padding will be glued to the wood.
Title: Re: BAHNER
Post by: propless on April 19, 2008, 08:12:22 PM
DAAAMMN 2sav, that looks great for only 2 beers  ;) !!    And dont worry about the seats, thats the way thay were on mine when I took them apart to change some of the wood.  ;D
Title: Re: BAHNER
Post by: Brad @ SCJB on April 19, 2008, 08:31:54 PM
same with the seats out of ralphs liberty that i have yet to finish  :-[
Title: Re: BAHNER
Post by: 2savage4you on April 19, 2008, 08:44:33 PM
The seats  are fiberglass not wood  ???

2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on April 19, 2008, 08:49:22 PM
The seats  are fiberglass not wood  ???

2sav

2sav,

the fiberglass seats i got from skip had the foam separate too.
Title: Re: BAHNER
Post by: 2savage4you on April 20, 2008, 06:32:33 AM
2sav,

the fiberglass seats i got from skip had the foam separate too.


Good news ;)  The last set of fiberglass seats i had were in my sandrail.......they had the padding built into the cover.  I guess they are different for boats..Thats good new's , thanks guy's ;D

I was ready to go to the upholstery shop.........pissed off :banghead:

2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on April 20, 2008, 06:44:06 AM
i dont think there is a right or wrong way....boats or sandrails....i dont see how either method could be a problem for either application.
Title: Re: BAHNER
Post by: hotrod56cars on April 20, 2008, 08:58:31 AM
All the boat seats I've seen had the foam seperate from the vynl. I agree, I don't see why it would be a problem either way. Maybe they're seperate to dry them out easier?
Title: Re: BAHNER
Post by: propless on April 20, 2008, 09:12:53 AM
 I just got up in the attic / secret storage, and looked at the sand rail seats I have.  hhmmm, the foam is on the covers.  Maybe thay do it that way on the sand toys so you can remove the covers and wash out all the dirt / sand without getting the foam wet  :-\
Title: Re: BAHNER
Post by: 2savage4you on April 21, 2008, 11:29:54 AM
Its time to make a list...... of what needs to be done :o
Intake gaskets
Carb
New u joints
oil + filter
Forward / reverse cable
Battery
Header gaskets
Wiring harness
Misc...nutz & bolts
Alternator and bracket
Bassett "T"
Pulley
Plumbing/ hoses fittings & accessories
fuel filter
New ignition....Possibly MSD ;D
plugs/wires
Bilge pump
Boat registration
Trailer registration
new trailer tires , possibly bearings ???

Im sure that is not all of it , but its a start :banghead:
2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on April 21, 2008, 12:42:44 PM
i got a bilge pump you can have...i will send it with the other goodies im sending you.
Title: Re: BAHNER
Post by: 2savage4you on April 21, 2008, 03:31:46 PM
i got a bilge pump you can have...i will send it with the other goodies im sending you.

Thanks Brad. Believe it or not that is a big help ;)  Remind me to give you a big wet one , when we get to Parker ;D




















A cold Coor's  ;D

And you guy's thought i was going to get gay on ya huh >:D

2sav
Title: Re: BAHNER
Post by: 2savage4you on April 21, 2008, 03:37:00 PM
Well its done but not mounted yet, i still have to run the cable and wiring harness , so i see no reason to mount the side panels and seats just yet...... But now i can mount my throttle pedal (Thanks RyanBrindle) and my new PD handle ;D
2sav
(http://i223.photobucket.com/albums/dd269/2savage4you/011-7.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/010-6.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/008-10.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/007-9.jpg)
Title: Re: BAHNER
Post by: crewchief22 on April 21, 2008, 05:48:49 PM
Looks really good.

Its time to make a list...... of what needs to be done :o

Carb


I can't help with much of the other parts, but if you'd make up your mind about what your going to do with the carb... I'd like to help with that.








If I have to tell you again I might have to charge you double  ;D
Title: Re: BAHNER
Post by: Ralph Brunt on April 21, 2008, 05:49:59 PM
2sav, i have to say she is looking sweeeeeeeeeet
Title: Re: BAHNER
Post by: 2savage4you on April 21, 2008, 07:16:06 PM
Thanks Guy's...... RE the carb.. I dont know which way im going with it yet , i think im leaning to the new carb...Pricey but they sure are purdy ;)
Got a little more done this evening, Droop , Place diverter......

Got a bunch to do tomorrow... rideplate , throttle , PD handle/cable   and so on :banghead:
(http://i223.photobucket.com/albums/dd269/2savage4you/012-5.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/013-4.jpg)
2sav
Title: Re: BAHNER
Post by: Ralph Brunt on April 21, 2008, 07:20:44 PM
Thanks Guy's...... RE the carb.. I dont know which way im going with it yet , i think im leaning to the new carb...Pricey but they sure are purdy ;)
no,no,no purdy dont get you on the water :banghead:  :banghead:
Title: Re: BAHNER
Post by: OC2Vegas on April 21, 2008, 07:21:51 PM
no,no,no purdy dont get you on the water :banghead:  :banghead:

x2...run the ugly one and get your ass on the water!
Title: Re: BAHNER
Post by: 2savage4you on April 21, 2008, 07:23:08 PM
no,no,no purdy dont get you on the water :banghead:  :banghead:


Yeah , but you'r the one that say's     if it dont run  "CHROME IT"
Now thats purdy ;D

2sav
Title: Re: BAHNER
Post by: OC2Vegas on April 21, 2008, 07:27:27 PM

Yeah , but you'r the one that say's     if it dont run  "CHROME IT"
Now thats purdy ;D

2sav

If you are getting low on $$$ and you want to buy unexpected parts you will end up cheaping out and buying something that you didnt really want. use the ugly one, save your pennies and then buy the bling bling!
Title: Re: BAHNER
Post by: Ralph Brunt on April 21, 2008, 07:28:08 PM

Yeah , but you'r the one that say's     if it dont run  "CHROME IT"
Now thats purdy ;D

2sav
you got me on that one, but hell man just get on the water and buy the purdy carb after testing you may want an all together different carb. you dont know what your motor will tell you until you hit the water.
i hope that makes sense
Title: Re: BAHNER
Post by: 2savage4you on April 21, 2008, 07:41:43 PM
you got me on that one, but hell man just get on the water and buy the purdy carb after testing you may want an all together different carb. you dont know what your motor will tell you until you hit the water.
i hope that makes sense


Makes sense.........I didnt think of it that way. I have no idea whats in this 454 , i do know its a 454   020 with a crane or comp cam...Thats all i know ???

But next summer, i will have my  Big Boy Motor ;D
I will  take a look at it tomorrow , see if its worth rebuilding.. I have never had good luck with Holleys :banghead:
Thanks ;)
2sav
Title: Re: BAHNER
Post by: FORKEDUP on April 21, 2008, 08:56:52 PM
lookin great 2sav, closer and closer to making parker, keep it up....and listen to them about using the current carb.
Title: Re: BAHNER
Post by: 2savage4you on April 22, 2008, 07:47:15 PM
I posted it there for a reason, some of us know the reason ;D
http://www.banderlog.com/phpBB2/viewtopic.php?t=5773





2sav
Title: Re: BAHNER
Post by: flytime on April 22, 2008, 08:43:30 PM
Looks great 2sav. Keep going man! Your'e almost home. ;D
Title: Re: BAHNER
Post by: BOOST on April 22, 2008, 09:07:06 PM
Looks great 2sav. Keep going man! Your'e almost home. ;D
Lot of time and a whole lot of money looks great.
Title: Re: BAHNER
Post by: 82daytona on April 23, 2008, 08:20:17 AM
lookin good 2sav
Title: Re: BAHNER
Post by: 2savage4you on May 01, 2008, 05:39:14 PM
well it is in , the Bahner will NOT make Parker...  Ran into some issue's while installing the rockers!

Valve hits the piston :banghead:  Motor is coming back out tomorrow , and maybe this weekend pw_Tony will come back and degree the cam for me ;D  Cam is also bigger than i thought so i need to get my other set of heads done and a new intake...
2sav
(http://i223.photobucket.com/albums/dd269/2savage4you/001-29.jpg)
Thanks again to pw_Tony and 429heads for coming over  and helping me out today...You guy's are great :-*
Title: Re: BAHNER
Post by: Marcsrollin on May 01, 2008, 05:45:51 PM
How bad is it hitting? Is it something that can be cured with a diffrent pushrod or rocker arm ratio?
Title: Re: BAHNER
Post by: Brad @ SCJB on May 01, 2008, 05:46:19 PM
i got a good hammer.
Title: Re: BAHNER
Post by: Marcsrollin on May 01, 2008, 05:51:42 PM
Or just change the cam!
Title: Re: BAHNER
Post by: 2savage4you on May 01, 2008, 05:53:26 PM
i got a good hammer.

Thanks, but its not a Ford ;D

2sav
Title: Re: BAHNER
Post by: 2savage4you on May 01, 2008, 05:55:07 PM
Or just change the cam!

Yes that is an option and the cheapest way of doing it for now....... But i planned on upgrading the engine during the off season, so i decided to just do it all now. One time!!

2sav
Title: Re: BAHNER
Post by: pw_Tony on May 01, 2008, 07:08:22 PM
How bad is it hitting? Is it something that can be cured with a diffrent pushrod or rocker arm ratio?

It's smacking it pretty hard, I don't think the push rods are off enough to cause it, they are pretty close. And it's only got a 1.7 rocker arm ratio. I think we're going to degree in the cam and see if that clears it, and if not out comes the valve relief cutter. It's not that it's tight, it's just straight smacking the piston
Title: Re: BAHNER
Post by: 429heads on May 01, 2008, 08:50:49 PM
I think the cam in Sav boat is comp cam xm278h Hy A impeller( in.564 ex566 )112 lobe sep 2000to6200 rpm spring all most match LS6 seat an open pres. 1.88=1.15  1.750=1.65  1.500 300

Title: Re: BAHNER
Post by: pw_Tony on May 01, 2008, 09:11:02 PM
I think the cam in Sav boat is comp cam xm278h Hy A impeller( in.564 ex566 )112 lobe sep 2000to6200 rpm spring all most match LS6 seat an open pres. 1.88=1.15  1.750=1.65  1.500 300



Did we forget to measure the installed height before we left?
Title: Re: BAHNER
Post by: 429heads on May 01, 2008, 09:17:18 PM
Yes but I checked with gage here at the stock seting.
Title: Re: BAHNER
Post by: pw_Tony on May 01, 2008, 09:20:17 PM
Yes but I checked with gage here at the stock seting.

So the stock height is 1.88, and the seat pressure is at 115lbs?
Title: Re: BAHNER
Post by: Marcsrollin on May 01, 2008, 09:44:52 PM
I woulde't clearence thos pistons too much being it is a chevy running flat tops! Flat tops in a chevy , what is that 8 to 1 compression?
Title: Re: BAHNER
Post by: 429heads on May 01, 2008, 09:46:42 PM
Ls6 is 1.880 120lb 1.500 275lb comp is 1.900 122lb 306 @140
Title: Re: BAHNER
Post by: hotrod56cars on May 01, 2008, 09:50:12 PM
I woulde't clearence thos pistons too much being it is a chevy running flat tops! Flat tops in a chevy , what is that 8 to 1 compression?

I think he's using early 396 heads, very small closed combustion chamber, I think
Title: Re: BAHNER
Post by: pw_Tony on May 01, 2008, 10:22:40 PM
I woulde't clearence thos pistons too much being it is a chevy running flat tops! Flat tops in a chevy , what is that 8 to 1 compression?

That's what I was thinking, but the factory pistons are dished I think, I'm pretty sure they're over 9:1, but I haven't done the math on it. It had peanut port heads, and once he got an idea of what sized cam it had he decided that he doesn't want to run those heads at all
Title: Re: BAHNER
Post by: 2savage4you on May 02, 2008, 11:01:42 AM
Ls6 is 1.880 120lb 1.500 275lb comp is 1.900 122lb 306 @140


Soooooo.......... what does this mean ?  Am i going to use those springs on my new heads or replace?

2sav
Title: Re: BAHNER
Post by: 429heads on May 02, 2008, 01:32:17 PM
replace them start new and rite have spring set spec for you to look at
they have chrome moly retainer and hardened locks dual spring. you can use these
with dfferent set up to 700 lift . Same spring nice tall spring. ON set  inst 1.915@110lb or
1.885 @120lb or 1.845 @135lb  open max lift 1.185 @408lb coil bind 1.105
Title: Re: BAHNER
Post by: 2savage4you on May 02, 2008, 01:38:49 PM
replace them start new and rite have spring set spec for you to look at
they have chrome moly retainer and hardened locks dual spring. you can use these
with dfferent set up to 700 lift . Same spring nice tall spring. ON set  inst 1.915@110lb or
1.885 @120lb or 1.845 @135lb  open max lift 1.185 @408lb coil bind 1.105


So if i understand this right. Im buying new springs ???
2confused ;)
Title: Re: BAHNER
Post by: 429heads on May 02, 2008, 02:50:09 PM
I would you dont think, you play and not pay did you "'what that you say get in line pay and pay then pray no more bend over drive".  Sell the ones you have with heads
Title: Re: BAHNER
Post by: pw_Tony on May 02, 2008, 02:50:56 PM
I would you dont think, you play and not pay did you "'what that you say get in line pay and pay then pray no more bend over drive".  Sell the ones you have with heads

WTF?  :screwy:
Title: Re: BAHNER
Post by: GAWnCA on May 02, 2008, 03:32:15 PM
Thanks, but its not a Ford ;D

2sav

There's the problem!!!   >:D
Title: Re: BAHNER
Post by: 2savage4you on May 02, 2008, 05:05:00 PM
I would you dont think, you play and not pay did you "'what that you say get in line pay and pay then pray no more bend over drive".  Sell the ones you have with heads

OK i think i get it......... I need my spring back so i can sell them ;)
Here is my timing marks @ compression and exhaust, is this right if a cam has been degreed ???
2sav
(http://i223.photobucket.com/albums/dd269/2savage4you/002-24.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/001-30.jpg)
Title: Re: BAHNER
Post by: pw_Tony on May 02, 2008, 05:26:50 PM
Who knows if it's right or not. I would imagine, since they are not using the marks provided on the keys, that the paint marks would line up  ???
Title: Re: BAHNER
Post by: HDriderTH on May 02, 2008, 05:39:16 PM
that thing is SO far out it aint funny. that first pic is off by like a hundred degrees, the second is off about 45
Title: Re: BAHNER
Post by: OC2Vegas on May 02, 2008, 05:47:56 PM
Who knows if its right if you pull the bolts and rotate it 45 degrees it looks like it would line up. Maybe the cam is right but it wasnt assembled exactly the way it came off
Title: Re: BAHNER
Post by: crewchief22 on May 02, 2008, 06:18:19 PM
The main reason to degree a cam is to verify that everything is where it is supposed to be when assembled.

Cam timing looks way off according to those pics.

Let me see if I can dig up some information on how to degree a cam (easier than me trying to explain it).
Title: Re: BAHNER
Post by: Josh@JBP on May 02, 2008, 06:25:15 PM
that thing is SO far out it aint funny. that first pic is off by like a hundred degrees, the second is off about 45
x2 ...........when those two marks are lined up it should be top dead 6 (on chevy), but you should still degree it like crewchief22  said.
Title: Re: BAHNER
Post by: Josh@JBP on May 02, 2008, 06:34:09 PM
Here a link for degreeing in the cam,  but if you don't have a kit to degree in a camshaft it might be near impossible http://www.compcams.com/Technical/Instructions/Files/145.pdf

In theory however you should be able to lineup the dots and run it, but this doesn't allow for slight missmachining of camshaft or timing gears. 
Title: Re: BAHNER
Post by: Oldsquirt on May 02, 2008, 06:44:45 PM
2sav, with the crankshaft in the position it is in in those pics(keyway pointing up center of #1 cylinder centerline) the dowel in the cam should be at 3 0-clock. This is the point where the marks on the cam and crank gear will be adjacent to each other(crank gear mark straight up, cam gear mark straight down). You are WAY OFF and that will bend lots of valves.
Title: Re: BAHNER
Post by: crewchief22 on May 02, 2008, 06:58:27 PM
Thanks Josh... I was trying to scan some pages from my Crane Cams book  :banghead:
Title: Re: BAHNER
Post by: HDriderTH on May 02, 2008, 07:29:57 PM
You gotta put a dead stop on #1 piston, turn crank both ways to deadstop (close to TDC) noteing reading on your degree wheel bolted to your crank or balencer. You then set the degree wheel by splitting the difference between the two readings you got earlier On the degree wheel while turning the crank both directions. NOW you have accurate TDC. Next you get out your cam card and figure out at what degree do you have .050 lift on what particular valve. You'll need a dial indicater for this, which can also be used as your dead stop. You then set up a dial indicater on the valve you want to check and rotate the motor untill indicater reads .050 lift, now cheack the degree wheel and see if it matches what your cam card says. The three key ways on your crank sprocket will retard or advance your cam by 4 derees i think it is, you can use this adjustment to put the cam at .050 lift at the specified crank degree. With all this high tech adjusting of the cam it still shouldnt be as much as a tooth off on the sprockets. Also, set your timing marks looking at each other at TDC..... ALWAYS! Your crank sprocket has three keyways, they should be marked with a circle a box and a triangle, if you use the keyway with the box, use the box near the sprocket teeth as your timing mark. This could be your problem, wrong timing mark. The circle will be "O" and the box and trianle will be retard and advanced positions.
Title: Re: BAHNER
Post by: 2savage4you on May 02, 2008, 08:37:05 PM
Thanks guy's.....Looks like we are going to get this thing straight tomorrow ;) I still need big heads ;D

2sav
Title: Re: BAHNER
Post by: pw_Tony on May 02, 2008, 09:02:36 PM
Hey 2Sav, I think that cam needs to be degreed  ;D
Title: Re: BAHNER
Post by: hotrod56cars on May 02, 2008, 10:18:35 PM
Entertaining thread...  :D
Title: Re: BAHNER
Post by: Oldsquirt on May 03, 2008, 07:38:03 PM
So,............any progress on getting this cam properly timed so it will be ready for the "degreeing" process?
Title: Re: BAHNER
Post by: pw_Tony on May 03, 2008, 11:07:08 PM
So,............any progress on getting this cam properly timed so it will be ready for the "degreeing" process?

Not really, the lifters we're kind of throwing off results, so we ended up with straight up. I think once Steve can get One solid lifter, we can get an accurate reading and do it again. But at least the valves are nice and far from the pistons  ;D
Title: Re: BAHNER
Post by: 2savage4you on May 04, 2008, 07:50:00 AM
 Here's pw_Tony fixin my shit!
(http://i223.photobucket.com/albums/dd269/2savage4you/001-31.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-25.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-21.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/005-15.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on May 04, 2008, 07:54:06 AM
(http://i223.photobucket.com/albums/dd269/2savage4you/007-12.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/006-13.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-21.jpg)
So now i can run it without banging up my valves, I have another set of heads that have the same valve size as the peanut heads but bigger ports..... I think i will run them..But maybe i should clean them up first ;D

(http://i223.photobucket.com/albums/dd269/2savage4you/012-7.jpg)
Thanks again Tony ;)

2sav
Title: Re: BAHNER
Post by: 2savage4you on May 04, 2008, 08:10:13 AM
I think the cam in Sav boat is comp cam xm278h Hy A impeller( in.564 ex566 )112 lobe sep 2000to6200 rpm spring all most match LS6 seat an open pres. 1.88=1.15  1.750=1.65  1.500 300



This one is correct . Comp Cam
HYDRAULIC-Jet boat with A or B impeller. Hyd. Hyd. 2500 to 6500 11-324-4 292AH 292 296 244 246 .568 .578 110°
Bracket racing or high performance use
2sav
Title: Re: BAHNER
Post by: 2savage4you on May 17, 2008, 07:07:40 PM
Well i hope you guys are sitting down cause i dont want nobody getting scared and falling down ;D
Here are some pics of whats to come.....The new Heartbeat for the Bahner ;)

Say it with me now.......ccccchhhhhheeeeeeevvvvvvvvyyy yyyyyy :o Oh ya bitches... dont be scared now :sly:
(http://i223.photobucket.com/albums/dd269/2savage4you/002-27.jpg)
Had to clean up all the casting flash, man was there alot of it and on the outside of the block aswell
(http://i223.photobucket.com/albums/dd269/2savage4you/001-36.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-23.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-23.jpg)
2sav
Title: Re: BAHNER
Post by: 2savage4you on May 17, 2008, 07:10:53 PM
Thanks to Pw_Tony , he donated a couple of cranks ;)
(http://i223.photobucket.com/albums/dd269/2savage4you/001-35.jpg)
I clean up the one im going to use (i hope) The machine shop will let me know im sure, trying to save some money :banghead:
(http://i223.photobucket.com/albums/dd269/2savage4you/006-14.jpg)
so we will see if it will fly or not, otherwise im still looking for a crank.. Locally ;D
2sav
Title: Re: BAHNER
Post by: flytime on May 17, 2008, 07:22:36 PM
Good job 2sav. Glad to see a new fire under your'e ass with this boat. Remember....4 weeks till Parker ;D

Bob
Title: Re: BAHNER
Post by: 2savage4you on May 17, 2008, 07:29:11 PM
Good job 2sav. Glad to see a new fire under your'e ass with this boat. Remember....4 weeks till Parker ;D

Bob

Well in four weeks i might have my set of heads payed for by then, but thats about it.. Bahners not going to make an appearance (sp) to parker, or anywhere else for that matter :banghead:

But when she does, she will be right ;)

2sav
Title: Re: BAHNER
Post by: 429heads on May 17, 2008, 07:41:17 PM
crank LQQK as good as if it cam from the local cam & crank grinder here in
Fortmohave  :banghead: hope you have it ground in a good shop not to shure
of work done here if you know what I mean. I know now that any work that I
cant do is not going to be down here. :screwy: I all ready seen the work here to day
work&rework. :banghead:
Title: Re: BAHNER
Post by: 2savage4you on May 17, 2008, 07:46:44 PM
crank LQQK as good as if it cam from the local cam & crank grinder here in
Fortmohave  :banghead: hope you have it ground in a good shop not to shure
of work done here if you know what I mean. I know now that any work that I
cant do is not going to be down here. :screwy: I all ready seen the work here to day
work&rework. :banghead:

Elwood , post some pics of the heads for me ;D

Lets show these guys we aint playin......
2sav
Title: Re: BAHNER
Post by: hotrod56cars on May 17, 2008, 07:57:42 PM
If anyone is going to Bullhead I have a 454 crank for 2Sav... garaunteed straight and not cracked with plenty of machining life left in it. Zero rust. Let me know in a PM.
Title: Re: BAHNER
Post by: 2savage4you on May 17, 2008, 08:10:43 PM
If anyone is going to Bullhead I have a 454 crank for 2Sav... garaunteed straight and not cracked with plenty of machining life left in it. Zero rust. Let me know in a PM.


Thanks Rod, thats way cool of you ;)

2sav
Title: Re: BAHNER
Post by: 429heads on May 17, 2008, 08:31:49 PM
Heads 290 cast 101cc chamber polished large oval port taken to rec port size Les 1/8 as witness line int 7 angle seat cut serdi blade all seat same size same depth all master cut
bowls blended and reshaped valves 45deg with30deg back cut to seat size all valves 11/32 stem int 2.250 ex 1.880 45 deg 30 deg back cut to burnish line. guides bronze replacement 1/2 no junk
guide liners no stone cut seats heads cc and cut on 570 broach all port lay out buy height Gage, valve steams all same length, all springs index and ends ground for true 90 deg set,
heads cc and match cut . Push rods to be indexed and proper roll out on stem. spring to match cam spec, intake rework to head port size heads work from 1500rpm to 6000 rpm small port high port  velocity . will show more pictures later :mad:
                                               
Title: Re: BAHNER
Post by: hotrod56cars on May 18, 2008, 08:40:13 AM
A set of pistons very similar to this piston
[attachimg=#]
made my 427 BBC have about 11:1 compression ratio with a 101cc head. I believe a flat top with a 101cc head puts it around 9.5:1 - 10:1. If your engine is a 454 and not a 427 then the compression ratio is going to be a little higher, say maybe 11.25:1 with pistons similar to the pistons I used. The small combustion chamber definately has advantages for a BBC over a larger combustion chamber and a bigger dome to get the same compression ratio due to how the A/F ratio is burnt in the combustion chamber (also a advantage for Ford's vs. Chevy's).

Here's what happens if you're a cheap asss  :banghead: that runs too low octane in a Chevy with 11:1 compression ratio using forged pistons.
[attachimg=#]
Title: Re: BAHNER
Post by: 2savage4you on May 18, 2008, 09:01:08 AM
Rod thats great info, i apreciate it VERY much.   Well i was thinking Hypers to save some money, but i guess in the long run it will just cost me more than buying the forged to begin with. So that is what i will do ;)

I was thinking about these as my choices. TRW forged pistons
(http://i223.photobucket.com/albums/dd269/2savage4you/trw-l2399f40_w_m.jpg)
Dome top will put me at 10.35:1 with 100.9cc heads
(http://i223.photobucket.com/albums/dd269/2savage4you/trw-l2377f40_w_m.jpg)
Flat top will put me at 8.62:1 with 100.9cc heads

I just dont want to make the same mistake as i did when i was mentally ill and trying to build a FORD :banghead:
2sav
Title: Re: BAHNER
Post by: hotrod56cars on May 18, 2008, 09:22:41 AM
8.62:1... ouch. I'm surprised those pistons with the small dome don't have any intake valve relief cut into them.  ???

Curious where did you get those compression ratio numbers at? I got mine from the guy that re-rebuilt my engine for me and it was his "best guess" without doing any math.
Title: Re: BAHNER
Post by: propless on May 18, 2008, 09:25:58 AM
Well i hope you guys are sitting down cause i dont want nobody getting scared and falling down ;D
Here are some pics of whats to come.....The new Heartbeat for the Bahner ;)

Say it with me now.......ccccchhhhhheeeeeeevvvvvvvvyyy yyyyyy :o Oh ya bitches... dont be scared now
2sav


I just dont want to make the same mistake as i did when i was mentally ill and trying to build a FORD :banghead:
2sav

 Allright Bahner boy thats about enough lip out of you !   It realy dosnt matter what pistons you use because the only time any of your "project boats" get wet is wen you wash them  :screwy:.  Why dont you save yourself some money and stress and just sit in the boat makeing vroom vroom noises while the wife mists you with a hose  ::).  Besides every one knows Chevy powered boats are faster on the trailer than on the water.  >:D ;D
Title: Re: BAHNER
Post by: hotrod56cars on May 18, 2008, 09:48:09 AM
Allright Bahner boy thats about enough lip out of you !   It realy dosnt matter what pistons you use because the only time any of your "project boats" get wet is wen you wash them  :screwy:.  Why dont you save yourself some money and stress and just sit in the boat makeing vroom vroom noises while the wife mists you with a hose  ::).  Besides every one knows Chevy powered boats are faster on the trailer than on the water.  >:D ;D

You're at Beerjets house aren't you!  :sly:
Title: Re: BAHNER
Post by: propless on May 18, 2008, 09:59:18 AM
You're at Beerjets house aren't you!  :sly:

Hmmm, point taken .  I'll be good now  ::)

 Looks great 2sav you'll be on the river in no time  ::)
Title: Re: BAHNER
Post by: 2savage4you on May 18, 2008, 10:16:17 AM
8.62:1... ouch. I'm surprised those pistons with the small dome don't have any intake valve relief cut into them.  ???

Curious where did you get those compression ratio numbers at? I got mine from the guy that re-rebuilt my engine for me and it was his "best guess" without doing any math.


Summits website is where i found these little gems.

2sav
Title: Re: BAHNER
Post by: 2savage4you on May 18, 2008, 10:18:10 AM
Allright Bahner boy thats about enough lip out of you !   It realy dosnt matter what pistons you use because the only time any of your "project boats" get wet is wen you wash them  :screwy:.  Why dont you save yourself some money and stress and just sit in the boat makeing vroom vroom noises while the wife mists you with a hose  ::).  Besides every one knows Chevy powered boats are faster on the trailer than on the water.  >:D ;D



Thats funny cause i do sit in it making noises and drinking my beer, Im still trying to convince the woman to do the mist thing......I think im getting closer ;)

2sav
Title: Re: BAHNER
Post by: Blue on May 18, 2008, 10:37:57 AM
i have at least 5 of everything you need. Let me know if you need pistons etc.
Title: Re: BAHNER
Post by: The Chaz on May 18, 2008, 10:42:16 AM


Thats funny cause i do sit in it making noises and drinking my beer, Im still trying to convince the woman to do the mist thing......I think im getting closer ;)

2sav

I can't believe I never thought of that for my non-running days >:D
Title: Re: BAHNER
Post by: hotrod56cars on May 18, 2008, 11:40:10 AM
I can't believe I never thought of that for my non-running days >:D

X2

Freakin' brilliant.
Title: Re: BAHNER
Post by: beerjet on May 18, 2008, 02:14:33 PM
Since your startin from scratch , just make sure your following your engine builders instructions or whomever's instruction you'll be taking . It's always good to get opinions and bounce ideas off of people and then run them by your builder . Good luck and we're here to help .

-beerjet-
Title: Re: BAHNER
Post by: 2savage4you on May 18, 2008, 02:28:59 PM
Since your startin from scratch , just make sure your following your engine builders instructions or whomever's instruction you'll be taking . It's always good to get opinions and bounce ideas off of people and then run them by your builder . Good luck and we're here to help .

-beerjet-

Thanks Omar ;)

As far as my engine builder go's  I dont have one. I might end up letting the machine shop build it, short block only which i think is my safest bet....  But you know me , i might pull something else out my ass :o

2sav
Title: Re: BAHNER
Post by: Luckie Stiff on May 18, 2008, 02:42:44 PM
Sav-

Do yourself a favor, call Jim Brock, he builds some amazing shit. It's a short drive from BHC to his shop, he'll even help you dial it in once it's in the boat, trust me you won't be disappointed.

Skip
Title: Re: BAHNER
Post by: 2savage4you on May 19, 2008, 06:07:14 PM
The Bahner has been tagged :o Now she can represent!!
(http://i223.photobucket.com/albums/dd269/2savage4you/004-24.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-24.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/001-37.jpg)
Thanks to Brad , hookin it up ;) I got a few more to be stickin on the cars >:D
Well i aint done shit to the boat, to busy being a broke ass ;D so i finished the ride plate today
(http://i223.photobucket.com/albums/dd269/2savage4you/005-17.jpg)
Dont know if its right or not, but its on......
2sav
Title: Re: BAHNER
Post by: Ralph Brunt on May 19, 2008, 06:42:49 PM

I just dont want to make the same mistake as i did when i was mentally ill and trying to build a FORD :banghead:
2sav
the ford would have been done already (DUH :banghead:)
Title: Re: BAHNER
Post by: skee on May 19, 2008, 10:46:14 PM
Come on now 2sav....ford,chevy,ford,chevy,ford,chevy :screwy:... :banghead: You shoulda stuck with the FoMoCo.....but ya didnt..so now yer STILL tryin' to get that thing to run >:D....lol!! Just so's ya know....My FORD TOWS my Chevy!  :P  ::)  8)  Come on Brother...get that thing done and GET IT WET! >:D
Title: Re: BAHNER
Post by: 2savage4you on May 20, 2008, 11:41:06 AM
the ford would have been done already (DUH :banghead:)


You are probably right.......BUT im probably the only one that feels this way about who i got it from!!Another engine i was lied to about, it would bug me to the end of the earth everytime i looked at it.

I have a bitchen block now,All machine work is payed for already just need to get my pistons. 429heads is hooking me up on the heads (payment plan)  I might have a good crank.. And with this stimulus check, i might be on the water sooner than you think ;D

Just bare with me guy's  Im really trying........

2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on May 20, 2008, 11:49:23 AM
you got about 3 weeks :sly:
Title: Re: BAHNER
Post by: OC2Vegas on May 31, 2008, 07:18:09 PM
Dude, just make it officially known: Did you sell it or not?

If he did....Let the hazing begin!
Title: Re: BAHNER
Post by: 2savage4you on May 31, 2008, 07:20:35 PM
Dude, just make it officially known: Did you sell it or not?

If he did....Let the hazing begin!


BRING IT...............

2sav ::)
Title: Re: BAHNER
Post by: Brad @ SCJB on May 31, 2008, 07:22:29 PM
yeah, he sold it...
Title: Re: BAHNER
Post by: flytime on May 31, 2008, 09:24:37 PM
 :screwy: :screwy: :screwy: :screwy: :screwy: ???
Title: Re: BAHNER
Post by: crewchief22 on May 31, 2008, 10:40:50 PM
Did Mrs.2Sav string him up or what?
Title: Re: BAHNER
Post by: 2savage4you on June 01, 2008, 07:30:09 AM
Did Mrs.2Sav string him up or what?


You forget, im the Man!!

2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on June 01, 2008, 07:31:31 AM

You forget, im the Man!!

2sav

dont make me call her again...  :sly:
Title: Re: BAHNER
Post by: 2savage4you on June 01, 2008, 07:35:01 AM
dont make me call her again...  :sly:

Im gonna change the phone numbers

2sav :banghead:
Title: Re: BAHNER
Post by: 2savage4you on June 01, 2008, 07:41:29 AM
Just so every one know's..............

The Bahner is still in the family and not going anywhere ;).  And no she's not making me keep it!! I put a down payment on a used 454 that runs, so its just a matter of picking it up, wiring the boat and plumbing it. And a few small things
(http://i223.photobucket.com/albums/dd269/2savage4you/001-41.jpg)
2sav
Title: Re: BAHNER
Post by: Brad @ SCJB on June 01, 2008, 07:48:49 AM
are you going to make it to parker?

even if the boat isnt done, i'd like to see you there. that goes for anyone. a running boat isnt a requirement. There will be plenty of boats there to get rides in.
Title: Re: BAHNER
Post by: 2savage4you on June 01, 2008, 08:02:29 AM
I spent the day at the river yesterday watching running boats and it sucked with mine this close and still sitting in the driveway :banghead:  I blame this on myself, trying to make everything perfect. Im not being picky any more im just trying to get it in the water. The picky part can come after its running..

I am taking vacation that week so we will see, but i kinda doubt it...

2sav
Title: Re: BAHNER
Post by: 2savs lady on June 01, 2008, 08:10:52 AM
are you going to make it to parker?

even if the boat isnt done, i'd like to see you there. that goes for anyone. a running boat isnt a requirement. There will be plenty of boats there to get rides in.

We're gonna try to come down for at least the day.

savslady
Title: Re: BAHNER
Post by: flytime on June 01, 2008, 08:53:50 AM
Just so every one know's..............

The Bahner is still in the family and not going anywhere ;).  And no she's not making me keep it!! I put a down payment on a used 454 that runs, so its just a matter of picking it up, wiring the boat and plumbing it. And a few small things
(http://i223.photobucket.com/albums/dd269/2savage4you/001-41.jpg)
2sav

Well thats a releif  ;D. Between you and Skip I cant keep up :screwy: Hopefully we will see you and boat in Parker. It would be a great start of the seson for you. Good luck.

Bob
Title: Re: BAHNER
Post by: HDriderTH on June 01, 2008, 09:23:16 AM
as always, need help dont hesitate
Title: Re: BAHNER
Post by: OC2Vegas on June 01, 2008, 04:59:59 PM
Im glad to hear that you havent given up on the Bahner!  I think your mindset about getting it on the water and then worrying about the "dreams" is a great idea....improving it is why we have winter!
Title: Re: BAHNER
Post by: Ralph Brunt on June 01, 2008, 05:01:20 PM
Im glad to hear that you havent given up on the Bahner!  I think your mindset about getting it on the water and then worrying about the "dreams" is a great idea....improving it is why we have winter!
couldn't have said it better myself ;D
Title: Re: BAHNER
Post by: FORKEDUP on June 01, 2008, 06:44:01 PM
ok who loged in under 2savs account ???  he is making way to much sense and thinking logically.  way to go buddy, hope to see you in parker ;D
Title: Re: BAHNER
Post by: 2savage4you on June 01, 2008, 07:26:17 PM
ok who loged in under 2savs account ???  he is making way to much sense and thinking logically.  way to go buddy, hope to see you in parker ;D


Yeah i think i hit my head or something :screwy:

2sav
Title: Re: BAHNER
Post by: hotrod56cars on June 01, 2008, 10:01:56 PM

Yeah i think i hit my head or something :screwy:

2sav

That's funny right there. Thanks.  ;)  :D
Title: Re: BAHNER
Post by: 2savage4you on June 03, 2008, 02:25:41 PM
Ok so  what is the proper term for these things? Turn finns, skags? When people ask i want to know what to tell them......
2sav
(http://i223.photobucket.com/albums/dd269/2savage4you/001-42.jpg)
Title: Re: BAHNER
Post by: pw_Tony on June 03, 2008, 02:31:03 PM
Turn fins
Title: Re: BAHNER
Post by: 2savage4you on June 03, 2008, 03:11:31 PM
Turn fins


Thats what i have called them and people look at me like im crazy :screwy:

O'well thanks for the info......

2sav
Title: Re: BAHNER
Post by: beerjet on June 03, 2008, 03:15:42 PM

Thats what i have called them and people look at me like im crazy :screwy:

O'well thanks for the info......

2sav
Make sure to clearify that the the one on the nozzle is the rudder .

-beerjet-
Title: Re: BAHNER
Post by: pw_Tony on June 03, 2008, 03:22:24 PM
I'm pretty sure Skegs turn, but hey I'm not a v-drive guy  ::)
Title: Re: BAHNER
Post by: 2savage4you on June 03, 2008, 03:26:10 PM
Make sure to clearify that the the one on the nozzle is the rudder .

-beerjet-

Thats funny Omar ;D

2sav
Title: Re: BAHNER
Post by: 2savage4you on June 06, 2008, 05:49:36 PM
Well its been awhile since i last worked on the Bahner, so i decided i am going to tie up all the loose ends on her.

I finally finished the seat mounts, that ugly wood look was buggin the hell outa me. I had a little carpet left, so i fixed her up purdy and all ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/001-43.jpg)
Eventhough you really wont be able to see the mounts after the boats complete....
(http://i223.photobucket.com/albums/dd269/2savage4you/002-30.jpg)
Oh well its some type of progress.  Tomorrow i can mount the passenger seat and side panel, but the drivers side will have to wait till i get the new forward/reverse cable....

Man i can almost taste the water................nevermind, its the light beer im drinking >:D

2sav
Title: Re: BAHNER
Post by: flytime on June 06, 2008, 05:53:58 PM
I gotta hand it to you 2 sav. Boat is looking really nice! I think I speak for everyone here by saying we cant wait to see it done.

Oh, one more thing,


GET YOUR ASS TO PARKER
Title: Re: BAHNER
Post by: 2savage4you on June 06, 2008, 06:02:50 PM
Im getting tired of see'ing all these turn key boats for sale, cheap.......

This one is local to me and can probably pick it up for $3,500

Maybe i really should sell this boat, cut my loss and buy a turn key ???
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=170225954250&ssPageName=STRK:MEWA:IT&ih=007
2sav ::)
Title: Re: BAHNER
Post by: flytime on June 06, 2008, 06:03:55 PM
Or......finish yours and make it turn key. Come on...youre soooo close.
Title: Re: BAHNER
Post by: BOOST on June 06, 2008, 06:51:15 PM
Im getting tired of see'ing all these turn key boats for sale, cheap.......

This one is local to me and can probably pick it up for $3,500

Maybe i really should sell this boat, cut my loss and buy a turn key ???
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=170225954250&ssPageName=STRK:MEWA:IT&ih=007
2sav ::)
come get the hawaiian make an offer
Title: Re: BAHNER
Post by: Marcsrollin on June 06, 2008, 06:51:30 PM
Im getting tired of see'ing all these turn key boats for sale, cheap.......

This one is local to me and can probably pick it up for $3,500

Maybe i really should sell this boat, cut my loss and buy a turn key ???
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=170225954250&ssPageName=STRK:MEWA:IT&ih=007
2sav ::)


Buy it 2sav , come back to the ford side!! >:D
Title: Re: BAHNER
Post by: 2savage4you on June 06, 2008, 06:57:27 PM

Buy it 2sav , come back to the ford side!! >:D

But then i would have to change my sig line, lets weigh it out.....................

..............................Phuck the sig line, give me a boat i can run >:D

If  i buy a ford, you phuckers better not give me no shit!!!!!

2sav ;D
Title: Re: BAHNER
Post by: BOOST on June 06, 2008, 07:04:27 PM
But then i would have to change my sig line, lets weigh it out.....................

..............................Phuck the sig line, give me a boat i can run >:D

If  i buy a ford, you phuckers better not give me no shit!!!!!

2sav ;D
lets do some thing i have three turn key boats here,i might sell my Hondo dont even use it
Title: Re: BAHNER
Post by: 2savage4you on June 06, 2008, 07:08:22 PM
lets do some thing i have three turn key boats here,i might sell my Hondo dont even use it

Before i can do anything i need to sell my Bahner and get  money back...... which means i need to list it :banghead:

Hondo, got pics?

2sav
Title: Re: BAHNER
Post by: BOOST on June 06, 2008, 07:13:20 PM
Before i can do anything i need to sell my Bahner and get  money back...... which means i need to list it :banghead:

Hondo, got pics?

2sav
here's a couple
Title: Re: BAHNER
Post by: 2savage4you on June 06, 2008, 07:15:30 PM
here's a couple


Now thats just SWEET..........

2sav
Title: Re: BAHNER
Post by: BOOST on June 06, 2008, 07:18:29 PM

Now thats just SWEET..........

2sav
what a shame dont even get used.
Title: Re: BAHNER
Post by: 2savage4you on June 06, 2008, 07:19:32 PM
what a shame dont even get used.

You got a price in mind ??? Or just tossing it around ?

2sav
Title: Re: BAHNER
Post by: BOOST on June 06, 2008, 07:22:28 PM
You got a price in mind ??? Or just tossing it around ?

2sav
just tossing it around every time i get ready to take it out something comes up to much time and money just to sit here.
Title: Re: BAHNER
Post by: GlassCutter on June 06, 2008, 08:23:50 PM
JUST BUY THE FRIGGING THING AND BE DONE WITH IT!
Title: Re: BAHNER
Post by: bkplesh on June 07, 2008, 08:10:27 AM
2sav, this post and you are starting to sound like The old HotRod!  You have a nice boat now!!!!!  Just get the thing DONE. If or when you sell the bahner, YOU WILL MISS HER!  So get her running and then make up your mind.
Title: Re: BAHNER
Post by: jrork on June 10, 2008, 08:12:10 PM
2sav, this post and you are starting to sound like The old HotRod!  You have a nice boat now!!!!!  Just get the thing DONE. If or when you sell the bahner, YOU WILL MISS HER!  So get her running and then make up your mind.

I gotta side with BK here. You've done a hell of a job, just finish it and enjoy (while looking for another boat to Compliment the one you just finished)
Title: Re: BAHNER
Post by: 2savage4you on June 11, 2008, 05:31:37 PM
Thanks guy's,  looks like i will be putting on my new forward /reverse cable and my steering swivel tomorrow, and then i can install the drivers seat (mine) and side panel ;D

Just getting all the little crap out of the way........ I swear i have replaced everything in this boat except the hull and pump. Atleast its all new :banghead:

 Now i just need to plumb it, wire it and  one day at band camp :screwy:
Yes im drinking.............

Vas2
Title: Re: BAHNER
Post by: 2savage4you on June 11, 2008, 07:12:34 PM
Forgot to mention @ 10am tomorrow the Bahner gets a new Heartbeat ;D   454 .030 OH YA........

But it really dont matter cause by the time i finish the boat, i wont be able to afford to put gas in it :banghead:


2sav :'(
Title: Re: BAHNER
Post by: propless on June 11, 2008, 07:34:05 PM
Forgot to mention @ 10am tomorrow the Bahner gets a new Heartbeat ;D   454 .030 OH YA........

But it really dont matter cause by the time i finish the boat, i wont be able to afford to put gas in it :banghead:


2sav :'(

 Way to go 2sav  ;D ;D . 

 Dont worry about the gas, You only have to go up river and float home  ;D
Title: Re: BAHNER
Post by: propless on June 12, 2008, 10:32:44 PM
 Sooo, wheres the pics of the new motor  ???
Title: Re: BAHNER
Post by: 2savage4you on June 13, 2008, 04:02:54 AM
Sooo, wheres the pics of the new motor  ???




Would you believe
(http://i223.photobucket.com/albums/dd269/2savage4you/5326852122220-477-CI-Blown-BBC-730H.jpg)
I dont know why i cant get it started, i think it swallowed a FORD :o...............hick up!
And mine has carpet ;D

2sav
Title: Re: BAHNER
Post by: 82daytona on June 13, 2008, 06:02:39 AM
you wish 2sav
Title: Re: BAHNER
Post by: OC2Vegas on June 13, 2008, 07:53:11 AM
actually that kinda looks like the side of 2savs house. curious now!
Title: Re: BAHNER
Post by: propless on June 13, 2008, 09:13:41 AM



Would you believe
(http://i223.photobucket.com/albums/dd269/2savage4you/5326852122220-477-CI-Blown-BBC-730H.jpg)
I dont know why i cant get it started, i think it swallowed a FORD :o...............hick up!
And mine has carpet ;D

2sav

 LOL,  Now thats some funny stuff right there !!  (http://i239.photobucket.com/albums/ff97/propless/lmao.gif) (http://i239.photobucket.com/albums/ff97/propless/lmao.gif)
Title: Re: BAHNER
Post by: 82daytona on June 13, 2008, 01:59:08 PM
hey fuker i just saw that same motor on racing junk :D
Title: Re: BAHNER
Post by: 2savage4you on June 13, 2008, 02:31:57 PM
hey fuker i just saw that same motor on racing junk :D


No way dude.............

2sav ;D
Title: Re: BAHNER
Post by: OC2Vegas on June 13, 2008, 08:07:01 PM
I dont know why you try to be all secretive about your part.....Thats it, I am driving to 2savs house and if its there I am putting it in my truck and bringing it to my house!
Title: Re: BAHNER
Post by: 2savage4you on June 13, 2008, 08:13:51 PM
I dont know why you try to be all secretive about your part.....Thats it, I am driving to 2savs house and if its there I am putting it in my truck and bringing it to my house!


Well with the gas prices i had to sell it and get something more economical ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/3581754748.jpg)

2sav ;D
Title: Re: BAHNER
Post by: OC2Vegas on June 13, 2008, 08:16:03 PM

Well with the gas prices i had to sell it and get something more economical ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/3581754748.jpg)

2sav ;D

How about a real picture (bigger) ;D
Title: Re: BAHNER
Post by: 2savage4you on June 13, 2008, 08:19:47 PM
How about a real picture (bigger) ;D


I said economical..........Didn't i ;D

2sav
Title: Re: BAHNER
Post by: OC2Vegas on June 13, 2008, 08:29:57 PM
is it one of those mini v8's? ;D
Title: Re: BAHNER
Post by: 2savage4you on June 17, 2008, 06:50:33 PM
Well boy's the reason the wife and i didn't get to Parker. As much as we wanted to make the trip, it just wasn't in the cards..... She got really sick, temp of 101.8 She's fine now, back to the same ol bitchen :banghead: ( I guess thats a good thing) ???

but i made a little progress with the boat. Here's a little story, i went to Holiday rv and marine after i called for a new forward/reverse cable and a steering swivel.... They said yeah we have it in stock ;D Wow for the first time they actually have something i need in stock, Woo Hoo...... After 45 mins of them being on the phone looking for it, they say it will be $165 and will be here in two days...Ok WTF happened to it being in stock ??? Whatever.... I left came straight home called Rex marine and had it here in Three days for only $121 ;D Now my pump is complete and ready to throw some roosts  >:D
Nevermind that gasket, i forgot to take it off before i put the swivel on. I guess i was just excited to get it finished.
(http://i223.photobucket.com/albums/dd269/2savage4you/004-27.jpg)
And now the motor, i spent the last 4 days getting it ready to drop in the boat......
It goes in tomorrow in the am, I have a new Holley 750 DP on the way, so now i just need a dizzy, Bilge pump, plumbing, and wiring and i think its time to get her wet ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/003-28.jpg)
Took a different route with the engine color, As you can see its bleeding chevy orange, but will be shitting out ford blue when its done ;D ( Thats for you Propless >:D)
Oh and B-rad im gonna trailer your ass ;) ;) ;)

2sav

Title: Re: BAHNER
Post by: BOOST on June 17, 2008, 06:58:20 PM
Well boy's the reason the wife and i didn't get to Parker. As much as we wanted to make the trip, it just wasn't in the cards..... She got really sick, temp of 101.8 She's fine now, back to the same ol bitchen :banghead: ( I guess thats a good thing) ???

but i made a little progress with the boat. Here's a little story, i went to Holiday rv and marine after i called for a new forward/reverse cable and a steering swivel.... They said yeah we have it in stock ;D Wow for the first time they actually have something i need in stock, Woo Hoo...... After 45 mins of them being on the phone looking for it, they say it will be $165 and will be here in two days...Ok WTF happened to it being in stock ??? Whatever.... I left came straight home called Rex marine and had it here in Three days for only $121 ;D Now my pump is complete and ready to throw some roosts  >:D
Nevermind that gasket, i forgot to take it off before i put the swivel on. I guess i was just excited to get it finished.
(http://i223.photobucket.com/albums/dd269/2savage4you/004-27.jpg)
And now the motor, i spent the last 4 days getting it ready to drop in the boat......
It goes in tomorrow in the am, I have a new Holley 750 DP on the way, so now i just need a dizzy, Bilge pump, plumbing, and wiring and i think its time to get her wet ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/003-28.jpg)
Took a different route with the engine color, As you can see its bleeding chevy orange, but will be shitting out ford blue when its done ;D ( Thats for you Propless >:D)
Oh and B-rad im gonna trailer your ass ;) ;) ;)

2sav


Dam that boat looks good nice to see you finishing it.
Title: Re: BAHNER
Post by: 82daytona on June 17, 2008, 07:01:16 PM
I dont belive it I may have to do a drive by and report back to scjb
Title: Re: BAHNER
Post by: 2savage4you on June 17, 2008, 07:25:09 PM
I dont belive it I may have to do a drive by and report back to scjb

Great, i have enough drive by's in my hood, whats one more ;D

2sav
Title: Re: BAHNER
Post by: FORKEDUP on June 17, 2008, 07:45:23 PM
good job 2sav, keep it up and you'll be on the water in no time
Title: Re: BAHNER
Post by: bkplesh on June 17, 2008, 07:46:16 PM
14 pages wow. Just get it done, before you past the Mach 1 (23 pages) >:D
Title: Re: BAHNER
Post by: 2savage4you on June 17, 2008, 07:48:27 PM
14 pages wow. Just get it done, before you past the Mach 1 (23 pages) >:D

I thought it was 27 pages ;D

2sav
Title: Re: BAHNER
Post by: propless on June 17, 2008, 07:59:57 PM
Took a different route with the engine color, As you can see its bleeding chevy orange, but will be shitting out ford blue when its done ;D ( Thats for you Propless >:D)
Oh and B-rad im gonna trailer your ass ;) ;) ;)

2sav



  :o :o  This boys on CRACK !!!!   I don't care what color you paint that boat anchor,  I'll smack you back onto your trailer so fast you wont know what happened !!  You better go find some canoes to race (get a few wins under your belt) before you call out the BIG DOGS !!!  >:D ;D

Title: Re: BAHNER
Post by: FORKEDUP on June 17, 2008, 08:03:50 PM
woooof ;D
Title: Re: BAHNER
Post by: 2savage4you on June 17, 2008, 08:05:45 PM
  :o :o  This boys on CRACK !!!!   I don't care what color you paint that boat anchor,  I'll smack you back onto your trailer so fast you wont know what happened !!  You better go find some canoes to race (get a few wins under your belt) before you call out the BIG DOGS !!!  >:D ;D


BIG DOGS, thats funny......

Its more like....Here Kitty kitty ;D

2sav O0
Title: Re: BAHNER
Post by: bkplesh on June 17, 2008, 08:06:15 PM
  :o :o  This boys on CRACK !!!!   I don't care what color you paint that boat anchor,  I'll smack you back onto your trailer so fast you wont know what happened !!  You better go find some canoes to race (get a few wins under your belt) before you call out the BIG DOGS !!!  >:D ;D


hahaha, oh no  :o
Title: Re: BAHNER
Post by: propless on June 17, 2008, 09:14:58 PM

BIG DOGS, thats funny......

Its more like....Here Kitty kitty ;D

2sav O0

 [attachimg=1]

 
::) ::)  Yea, that just screams performance  ::) ::) 

 
Title: Re: BAHNER
Post by: 2savage4you on June 18, 2008, 07:11:59 AM
Yeah, i just hope it don't sink like a rock ::)

2sav
Title: Re: BAHNER
Post by: 2savage4you on June 18, 2008, 01:26:01 PM
Its time to make a list...... of what needs to be done
Intake gaskets........Done, Thanks Ryan ;)
Carb.......................Done
New u joints............Can wait till later
oil + filter................Done
Forward / reverse cable......Done
Battery
Header gaskets..................Done
Wiring harness
Misc...nutz & bolts
Alternator and bracket
Bassett "T"
Alt Pulley
Plumbing/ hoses fittings & accessories...Still working on it ;D
fuel filter................................D one
New ignition....Possibly MSD.....NOT!!.....for now im Getting a cheap one from Ebay ;)
plugs/wires................................Done
Bilge pump
Boat registration
Trailer registration
new trailer tires , possibly bearings .......It can wait........

Im sure that is not all of it , but its a start

Just updating my list of to do's ;D

2sav
Title: Re: BAHNER
Post by: KonaCole on June 18, 2008, 01:48:29 PM
You forgot a savings account for gas  >:D
Title: Re: BAHNER
Post by: Brad @ SCJB on June 18, 2008, 01:55:27 PM
i got a bildge pump you can have

what plumbing fittings, etc do you need? i got a few spare AN's i can send you along with some random pieces of steel braded stuff.

let me know what sizes/lengths and i will dig through what i got.
Title: Re: BAHNER
Post by: Ralph Brunt on June 18, 2008, 02:08:12 PM
i got the bassett T i will get it from my dads this weekend and get it out on monday. please remind me before saturday
Title: Re: BAHNER
Post by: 2savage4you on June 18, 2008, 02:22:31 PM
Wow, thanks guy's.......After the wife reads this she might wanna kiss you guy's ;D


2sav
Title: Re: BAHNER
Post by: Ralph Brunt on June 18, 2008, 02:58:32 PM
Wow, thanks guy's.......After the wife reads this she might wanna kiss you guy's ;D


2sav
i wanna kiss YOU foo :o
Title: Re: BAHNER
Post by: Luckie Stiff on June 28, 2008, 08:33:33 AM
Steve, I'm in for a fuel feed line for your carb, measure up your hose and let me know what fittings you need, sizes and all that happy shit, I'll buy your hoses and UPS them to you. Scoop looks good  ;D
Title: Re: BAHNER
Post by: 2savage4you on June 28, 2008, 10:39:12 AM
Steve, I'm in for a fuel feed line for your carb, measure up your hose and let me know what fittings you need, sizes and all that happy shit, I'll buy your hoses and UPS them to you. Scoop looks good  ;D


Thanks for the offer , but i got the fuel line covered  ;)

Yeah, i dont know why i get so excited over a freakin scoop......But she does look good ;D
Going to the river today and wish i was taken her with me....Maybe next month  O0
Thanks again Skip........You are a cool MO FO ;D

2sav
Title: Re: BAHNER
Post by: HDriderTH on June 28, 2008, 01:05:56 PM
Get busy focker, we're all goin to the lake tomorrw...you should be ready by then.
Title: Re: BAHNER
Post by: Luckie Stiff on June 28, 2008, 01:42:36 PM
This is what I meant by fuel thingie
(http://app.infopia.com/img/image/fp/VPID/4083584)

Now measure up all your water lines, give me sizes and fittings and I'll get them to you.
Don't fuck around, you can make the AVI trip, shit I'm coming so I expect you to be there

WITH THE BAHNER!
Title: Re: BAHNER
Post by: Nordie on June 28, 2008, 01:52:05 PM
luckie im only an hour and a half away if you want me to go knock him upside the head and a swift kick in the ass...after that we'll drink beer and i'll help him run around in circles
Title: Re: BAHNER
Post by: Luckie Stiff on June 28, 2008, 01:59:03 PM
I think you may have to! That boat's too damn close to being river ready.
Title: Re: BAHNER
Post by: Nordie on June 28, 2008, 02:04:31 PM
maybe the pictures from the lake mead violation will help him out...we got a small crew going tomorrow going to hang out, cook some brats and burgers and what not
Title: Re: BAHNER
Post by: 2savage4you on June 28, 2008, 03:39:45 PM
This is what I meant by fuel thingie
(http://app.infopia.com/img/image/fp/VPID/4083584)

Now measure up all your water lines, give me sizes and fittings and I'll get them to you.
Don't **** around, you can make the AVI trip, shit I'm coming so I expect you to be there

WITH THE BAHNER!

 Ok that i can use ;D   Water lines also.....But i dont know where to start ???
Looks like you guys want this boat to get wet as bad as i do ;D

 I will go measure my shiznit >:D

2sav
Title: Re: BAHNER
Post by: Luckie Stiff on June 28, 2008, 05:50:07 PM
I ran -8 (5/8") hose from the pump to my tee, to my H2O inlets, from my Tstat housing to the headers and the overboard dump.  What size threads are in your water pump blockoff plate and your T-stat housing?
Title: Re: BAHNER
Post by: 2savage4you on June 28, 2008, 06:01:21 PM
  What size threads are in your water pump blockoff plate and your T-stat housing?

Dont have any in my block off plates, i was thinking of running a cross over like Boost did on his Hondo...

The thermo has AN fittings in it and i dont know what size they are.........There blue ;D does that help ???

2confused O0
Title: Re: BAHNER
Post by: BOOST on June 28, 2008, 06:15:35 PM
Dont have any in my block off plates, i was thinking of running a cross over like Boost did on his Hondo...

The thermo has AN fittings in it and i dont know what size they are.........There blue ;D does that help ???

2confused O0
some thing like this
Title: Re: BAHNER
Post by: 2savage4you on June 28, 2008, 06:17:50 PM
some thing like this

Yeah, im going by what you have.. I would like to do the same thing, looks easy enough ;)

2sav
Title: Re: BAHNER
Post by: BOOST on June 28, 2008, 06:20:05 PM
Yeah, im going by what you have.. I would like to do the same thing, looks easy enough ;)

2sav
REX marine took care of me on that something like $50.00
Title: Re: BAHNER
Post by: 2savage4you on June 28, 2008, 06:27:13 PM
REX marine took care of me on that something like $50.00

How long ago was that? i just checked and it was $100........

2sav
Title: Re: BAHNER
Post by: BOOST on June 28, 2008, 06:29:24 PM
How long ago was that? i just checked and it was $100........

2sav
back in JAN 2008
Title: Re: BAHNER
Post by: BOOST on June 28, 2008, 07:49:40 PM
Well its been awhile since i last worked on the Bahner, so i decided i am going to tie up all the loose ends on her.

I finally finished the seat mounts, that ugly wood look was buggin the hell outa me. I had a little carpet left, so i fixed her up purdy and all ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/001-43.jpg)
Eventhough you really wont be able to see the mounts after the boats complete....
(http://i223.photobucket.com/albums/dd269/2savage4you/002-30.jpg)
Oh well its some type of progress.  Tomorrow i can mount the passenger seat and side panel, but the drivers side will have to wait till i get the new forward/reverse cable....

Man i can almost taste the water................nevermind, its the light beer im drinking >:D

2sav
cant stop looking at your boat looking good
Title: Re: BAHNER
Post by: bkplesh on June 28, 2008, 10:52:24 PM
Are you going to run a back seat?
Title: Re: BAHNER
Post by: Luckie Stiff on June 28, 2008, 11:58:30 PM
Sav-

f uck all that fancy shit, give me the thread sizes and I'll get your fittings and hose, I'm thinking it's all 3/8" NPT but I NEEED to know befor I buy all this shit, you owe me one Coors
Title: Re: BAHNER
Post by: 2savage4you on June 29, 2008, 06:18:47 AM
cant stop looking at your boat looking good

Yeah, its going to be one of the best looking boats on the river.........And yes im biased ;D
you can always buy it ;)

2sav
Title: Re: BAHNER
Post by: 2savage4you on June 29, 2008, 06:22:15 AM
Are you going to run a back seat?

Next season......Its all about getting it in the water right now, Hell now that i think about it we got five kids. Maybe i will leave the back seat out so the woman and i have a little get away time >:D

They can always ride in Grampa's boat ;D

2sav
Title: Re: BAHNER
Post by: 2savage4you on June 29, 2008, 06:28:34 AM
Sav-

f uck all that fancy shit, give me the thread sizes and I'll get your fittings and hose, I'm thinking it's all 3/8" NPT but I NEEED to know befor I buy all this shit, you owe me one Coors

Agreed with the fancy shit.........Fuel line is 3/8"  i think the water lines will be 5/8"  Ralph is also sending me a Bassett "T"  don't know what size fittings it takes, im assuming 5/8" as well ???


I owe you alot more than one "COORS" ;)

2sav
Title: Re: BAHNER
Post by: 2savage4you on June 29, 2008, 06:52:23 AM
After what boost put up there ::) I realized i didn't post up the newer pics.......
Pump is done, all brand new cables are hooked up and ready to go play ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/002-33.jpg)
The seats are installed along with the side panels.....Done ......
(http://i223.photobucket.com/albums/dd269/2savage4you/007-14.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-31.jpg)
Still looks the same, but one less thing do get done...... Went to Wallmart a few days ago and the wife picked up all new wire and lights for the trailer......Soooo.......that will be all done and ready to roll in a few days......

2sav
Title: Re: BAHNER
Post by: flytime on June 29, 2008, 07:55:12 AM
Looking REALLY good 2sav. You gotta feel good about finally getting this biatch done. Sounds like you will be getting her wet soon. Way to go.

Bob
Title: Re: BAHNER
Post by: BOOST on June 29, 2008, 08:04:51 AM
Looking REALLY good 2sav. You gotta feel good about finally getting this biatch done. Sounds like you will be getting her wet soon. Way to go.

Bob
  any day know  is that what i'm hearing you'll be like me know the boats done what do i do with all this free time, hopefully in the water good luck
Title: Re: BAHNER
Post by: 2savage4you on June 29, 2008, 08:05:51 AM
Looking REALLY good 2sav. You gotta feel good about finally getting this biatch done. Sounds like you will be getting her wet soon. Way to go.

Bob

Yeah, thanks to the good people/friends on this site , helping me out.... Man im stoked ;D

She's gonna be getting wet sooner than expected.... I will be posting a video of the first time i start her and the first run....... This is too bitchen.....

2sav ;D ;D ;D ;D
Title: Re: BAHNER
Post by: 2savage4you on June 29, 2008, 08:08:07 AM
  any day know  is that what i'm hearing you'll be like me know the boats done what do i do with all this free time, hopefully in the water good luck


I have access to three boat ramps behind my place....... ten minutes its in the water ;)
Yeah i will be there........

2sav
Title: Re: BAHNER
Post by: 2savage4you on July 01, 2008, 03:24:39 PM
Well i went out and got the trailer almost finished up to be road ready ;D
Before....
(http://i223.photobucket.com/albums/dd269/2savage4you/084.jpg)
After....
(http://i223.photobucket.com/albums/dd269/2savage4you/087.jpg)
Also get my shim kit for the flexplate, so its all together now!
(http://i223.photobucket.com/albums/dd269/2savage4you/088.jpg)
Its hotter than hell here, and i aint doing no mo today, its beer time ;)

2sav....Peace out  O0
Title: Re: BAHNER
Post by: BOOST on July 01, 2008, 04:58:01 PM
 what in the water for the 4 of July work on the boat and drink  get her done great job
Title: Re: BAHNER
Post by: BOOST on July 01, 2008, 05:17:05 PM
what in the water for the 4 of July work on the boat and drink  get her done great job
I have a tow ski bar for an BBC great shape its your if you need it
Title: Re: BAHNER
Post by: 2savage4you on July 02, 2008, 08:49:32 AM
I have a tow ski bar for an BBC great shape its your if you need it


Thanks. I wasn't shure i was going to use one or not , but i hear they are good to tie up to cause i can't beach the boat with the turn fins in it :banghead:

2sav
Title: Re: BAHNER
Post by: GAWnCA on July 02, 2008, 09:23:52 AM

Thanks. I wasn't shure i was going to use one or not , but i hear they are good to tie up to cause i can't beach the boat with the turn fins in it :banghead:

2sav

By not beaching the boat, you'll save the bottom!!!  That sand and rock really gouge through a hull....  Think of it as 36 grit sand paper rubbing the bottom every time you beach and every time another boat goes by and makes a wake. 
Title: Re: BAHNER
Post by: 2savage4you on July 02, 2008, 09:59:05 AM
By not beaching the boat, you'll save the bottom!!!  That sand and rock really gouge through a hull....  Think of it as 36 grit sand paper rubbing the bottom every time you beach and every time another boat goes by and makes a wake. 

Maybe i said it wrong, but i have no intentions of beaching my boat, i couldn't if i wanted to.... I was looking for another way to tie her up, and a ski tow makes perfect sense ;) I see these boats ties up in the bow and transom to keep them from moving when it gets in tight spots (Lotsaboats)  WooHoo >:D

Everything you posted above, makes perfect sense...... ;D thanks....

2sav
Title: Re: BAHNER
Post by: GAWnCA on July 02, 2008, 10:29:26 AM
I took that ski tow off my boat since I don't plan on towing anyone but still wanted to have a tie spot, just in case so I went with this http://shopping.rexmar.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=skitowstransombil from Rex Marine.  I may add another and then use them for tieing to and also use as the tie down for the tailer tie downs. 
Title: Re: BAHNER
Post by: 2savage4you on July 02, 2008, 10:32:56 AM
The Bahner is a really LIGHT lay up and i would have to reinforce it with some wood........But i would not feel comfy about it, i think im better off with a ski tow..... But thanks for the info ;)

2sav
Title: Re: BAHNER
Post by: 2savage4you on July 02, 2008, 11:01:35 AM
Its time to make a list...... of what needs to be done
Intake gaskets........Done, Thanks Ryan
Carb.......................Done
New u joints............Can wait till later
oil + filter................Done
Forward / reverse cable......Done
Battery
Header gaskets..................Done
Wiring harness
Misc...nutz & bolts
Alternator and bracket
Bassett "T"...........................Thanks Ralph ;)
Alt Pulley
Plumbing/ hoses fittings & accessories...Still working on it
fuel filter................................D one
New ignition....Possibly MSD.....NOT!!.....for now im Getting a cheap one from Ebay
plugs/wires................................Done
Bilge pump
Boat registration
Trailer registration
new trailer tires , possibly bearings .......It can wait........

Im sure that is not all of it , but its a start

Just updating my list of to do's

2sav
Title: Re: BAHNER
Post by: BOOST on July 10, 2008, 09:12:03 PM
Its time to make a list...... of what needs to be done
Intake gaskets........Done, Thanks Ryan
Carb.......................Done
New u joints............Can wait till later
oil + filter................Done
Forward / reverse cable......Done
Battery
Header gaskets..................Done
Wiring harness
Misc...nutz & bolts
Alternator and bracket
Bassett "T"...........................Thanks Ralph ;)
Alt Pulley
Plumbing/ hoses fittings & accessories...Still working on it
fuel filter................................D one
New ignition....Possibly MSD.....NOT!!.....for now im Getting a cheap one from Ebay
plugs/wires................................Done
Bilge pump
Boat registration
Trailer registration
new trailer tires , possibly bearings .......It can wait........

Im sure that is not all of it , but its a start

Just updating my list of to do's

2sav
is the boat in the water yet
Title: Re: BAHNER
Post by: GlassCutter on July 10, 2008, 09:33:51 PM
You really don't wanna go there do you?
Title: Re: BAHNER
Post by: BOOST on July 10, 2008, 09:45:20 PM
You really don't wanna go there do you?
A little motivation trying to help the guy out
Title: Re: BAHNER
Post by: OC2Vegas on July 11, 2008, 12:19:37 AM
Here ya go Steve....

http://orangecounty.craigslist.org/boa/745983675.html (http://orangecounty.craigslist.org/boa/745983675.html)

A lil motivation for you.
Title: Re: BAHNER
Post by: bkplesh on July 11, 2008, 04:55:14 AM
ya but it's  a TUNNEL BOTTOM BAHNER!  >:D
Title: Re: BAHNER
Post by: 82daytona on July 11, 2008, 07:04:06 AM
I hope my thread dosent go to 16 pages with out being done  ;D
Title: Re: BAHNER
Post by: OC2Vegas on July 11, 2008, 08:02:51 AM
ya but it's  a TUNNEL BOTTOM BAHNER!  >:D

but in none of the pictures can u see the tunnel bottom
Title: Re: BAHNER
Post by: HDriderTH on July 11, 2008, 08:17:06 AM
NEW LIST

1.  Put boat together
2.  Put boat in water
Title: Re: BAHNER
Post by: 82daytona on July 11, 2008, 08:24:09 AM
NEW LIST

1.  Put boat together
2.  Put boat in water


I say sell it  ;D and start over
Title: Re: BAHNER
Post by: 2savage4you on July 11, 2008, 01:04:32 PM
I see you guy's are having some fun huh :D

2sav
Title: Re: BAHNER
Post by: 2savage4you on July 11, 2008, 01:24:00 PM
I hope my thread dosent go to 16 pages with out being done  ;D

It probably wont, since you pay someone to do your work for you ;)

By the way, how's the Daytona ::)


2sav
Title: Re: BAHNER
Post by: 82daytona on July 11, 2008, 02:01:27 PM
it should be leaving in a few days if the work schedule allows
Title: Re: BAHNER
Post by: bkplesh on July 11, 2008, 03:30:47 PM
I hope my thread dosent go to 16 pages with out being done  ;D
it going to go like 25+ and I think this is getting to be like the Mac 1 posting. But the mac 1 was on the water once or twice before blowing a motor  ;D

2sav, It look like you're almost done, so just get-ur-done already!  >:D
Title: Re: BAHNER
Post by: 2savage4you on July 11, 2008, 03:54:52 PM
2sav, It look like you're almost done, so just get-ur-done already!  >:D


What makes you think im not trying ???   Oh the fact that im not made of money!!

His boat and mine are 2 different situations.....sooooooo..........fuck off!!!!!

2sav
Title: Re: BAHNER
Post by: 82daytona on July 11, 2008, 04:24:07 PM
I wish I had as much money as everyone seems to think  :banghead:
Title: Re: BAHNER
Post by: bkplesh on July 11, 2008, 04:43:17 PM
I wish I had as much money as everyone seems to think  :banghead:
why would you want less money. you haave more money then people think you have >:D
Title: Re: BAHNER
Post by: bkplesh on July 11, 2008, 04:48:53 PM

What makes you think im not trying ???   Oh the fact that im not made of money!!

His boat and mine are 2 different situations.....sooooooo..........**** off!!!!!

2sav
relax 2 sav, I was j/k  ;D 
I was just think that after 17 pages, the boat should have run!  alot of people give Rod a hard time for doing the same thing. (be a post whore >:D)


I'm should you're trying your best to get it done!!!  And done the way you want it (nice & clean)
Title: Re: BAHNER
Post by: 2savage4you on July 11, 2008, 05:00:04 PM
relax 2 sav, I was j/k  ;D 
I was just think that after 17 pages, the boat should have run!  alot of people give Rod a hard time for doing the same thing. (be a post whore >:D)


I'm should you're trying your best to get it done!!!  And done the way you want it (nice & clean)

Whoops......... I forgot the  ;D   i know whats up ;)   Havn't had much to post so , cause i havn't done much to her.....I got the money..... But i dont know what i want to do first..
1 New ignition
2 Plumbing
3 wire it
 I have the money to do one or the other , not all of it at once.... I did find a shop her in the valley that will do all my lines for me SS braided hose :o so it looks like monday im going down there and getting it plumbed ;D

Boy she is going to be purdy........Remember, if it don't run chrome it ;)
And of course i will post pics......  I just have to figure out what it is that i need as far as fitting go ???


2sav
Title: Re: BAHNER
Post by: bkplesh on July 11, 2008, 05:55:30 PM
I like your boat! I had one just like it, but brown. lite lay up with a ford motor and a berkely pump. It ran 78mph and the pump was very very warn(gear it an the bearing noise goes away ;)) I also did the same thing as you(redid it) wish I didnt do that >:D I spend like 5 to 6k on it and the sold it 3 river trip later. (get like 8500 for it) But I painted it , carpeted it, wired it, plumbed it, painted the trailer, gauges, enclosed the motor and put a electic hatch. plus a blower for the gas fumes. oh ya int. too  ;D
I did all that and I liked it better old sh!tty broan and tan :banghead: I just use the boat more when it was old looking :screwy:
Title: Re: BAHNER
Post by: Ralph Brunt on July 11, 2008, 05:59:44 PM

I did all that and I liked it better old sh!tty broan and tan :banghead: I just use the boat more when it was old looking :screwy:
I'm kinda the same i dont want to worry about my kids sandy feet walking or sliding across a new paint job so  i just keep it the way it is and enjoy it with my family.

get it done 2sav
Title: Re: BAHNER
Post by: 2savage4you on July 11, 2008, 06:12:51 PM
Guy's i appreciate what you are trying to say, but its not like i had this boat forever and then just decided to rebuild it... And i dont think anyone would have just put a motor in it and run it with there family in it and all ???

Gauges where junk, wiring was VERY brittle and you know the rest of the story...

What was...........
(http://i223.photobucket.com/albums/dd269/2savage4you/100_1494.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/100_1491.jpg)
to what is :D
(http://i223.photobucket.com/albums/dd269/2savage4you/004-31.jpg)

 And if i knew what i was doing, it might of been done by now.........Regardless i love my boat

2sav O0
Title: Re: BAHNER
Post by: bkplesh on July 11, 2008, 06:46:35 PM
that's a big change  :o
Title: Re: BAHNER
Post by: propless on July 11, 2008, 07:25:41 PM
 Dont let them get to you 2sav  ;) .  Its your project and it needs to make you happy, so let it be done when its done !!!  Theres no need to rush things or cut corners now, you have way to much time and money in it to halfass it together to get it on the water. Thats what Rod did and it cost him a motor, now hes taking his time and doing it right.  When people ask me when the Eliminator will be done, I say, when its done it will be done and not a day sooner  ;D ;D 

 BTW, its looking good, keep it up and get-it-done  ;) ;D
Title: Re: BAHNER
Post by: bkplesh on July 11, 2008, 09:25:10 PM
How did it cost rod a motor? The motor was built right. From what I heard. It was Rod that ran old gas that blew the motor up ;D You forgot the Rod factor! :banghead: O0
Title: Re: BAHNER
Post by: propless on July 12, 2008, 12:16:44 AM
How did it cost rod a motor? The motor was built right. From what I heard. It was Rod that ran old gas that blew the motor up ;D You forgot the Rod factor! :banghead: O0

 Do you mean the Sanford factor  ::) ::) ?  Yea you have a point there,  but can you explain how "bad gas" only affects one cylinder  ??? ??? 
Dont forget this,
 (quote Rod from the Mach 1 thread)  I had a mechanic briefly look at the engine in the Mach 1 this morning (he's here to fix the family boat's water pump and eratic running condition). He said it looked to him like there was a bad vacuum leak on that cylinder. He asked if the heads were surfaced (yes), asked if the block was surfaced (yes), asked how it idled (didn't idle very well at all), asked if it had any popping out the exhaust (yes), I then showed him the cylinder head and he looked at the gaskets and said that he could tell the gasket wasn't sealing and then he showed me how he could tell.
(unquote)
Bad gas my a** .   ::), that motor was in big trouble before it ever saw water, but he ran it anyway.  Go back and look at that thread , it was running like crap (wouldnt idle, popping, etc, etc) and he ran anyway just to get it on the water and try to get it faster than 49 mph  :screwy:.  Lesson to be learned = take your time and build it right, than if something is wrong fix it before you go to the lake.   

Sorry for the thread jack 2sav, now get back to work !!  ;) ;D
Title: Re: BAHNER
Post by: bkplesh on July 12, 2008, 07:15:07 AM
Do you mean the Sanford factor  ::) ::) ?  Yea you have a point there,  but can you explain how "bad gas" only affects one cylinder  ??? ??? 
Dont forget this,
 (quote Rod from the Mach 1 thread)  I had a mechanic briefly look at the engine in the Mach 1 this morning (he's here to fix the family boat's water pump and eratic running condition). He said it looked to him like there was a bad vacuum leak on that cylinder. He asked if the heads were surfaced (yes), asked if the block was surfaced (yes), asked how it idled (didn't idle very well at all), asked if it had any popping out the exhaust (yes), I then showed him the cylinder head and he looked at the gaskets and said that he could tell the gasket wasn't sealing and then he showed me how he could tell.
(unquote) sanford factor(yes) I think and I'll ask today. The motor I think was new right! Yes it was all about the gas thing about it did help that it was a year and a half old (something like that) did it!
Sorry 2sav,  O0
Bad gas my a** .   ::), that motor was in big trouble before it ever saw water, but he ran it anyway.  Go back and look at that thread , it was running like crap (wouldnt idle, popping, etc, etc) and he ran anyway just to get it on the water and try to get it faster than 49 mph  :screwy:.  Lesson to be learned = take your time and build it right, than if something is wrong fix it before you go to the lake.   

Sorry for the thread jack 2sav, now get back to work !!  ;) ;D
Title: Re: BAHNER
Post by: HDriderTH on July 12, 2008, 09:45:14 AM
building boats do get expensive. summer before last i owned two jet boats, boated all summer and made two grand off 'em. I have NEVER baught a turn key boat. My boat was supposed to be turn key and it took a month before i started it and i've had everything out  of it but the block, trans and steering. I t was turn key yesterday till i pulled the mag, will be again when i put the new one in today. It takes alot to make 'em turn key so hang in there, do it your way and get r done....just keep it! I started w/ a $1500 boat and in a year i worked up to a blown flatty and am into it well under 10 G's
Title: Re: BAHNER
Post by: BOOST on July 12, 2008, 10:36:49 AM
 very well said Terry
Title: Re: BAHNER
Post by: HDriderTH on July 12, 2008, 11:17:20 AM
very well said Terry

Really? I thot i was rambling.
Title: Re: BAHNER
Post by: TrollerDave on July 30, 2008, 11:06:42 PM
It's been a few weeks. What's the latest on this thing?
Title: Re: BAHNER
Post by: 82daytona on July 31, 2008, 09:58:47 AM
It's been a few weeks. What's the latest on this thing?
x2 ???
Title: Re: BAHNER
Post by: HDriderTH on July 31, 2008, 10:17:43 AM
x200
Title: Re: BAHNER
Post by: OC2Vegas on July 31, 2008, 11:17:45 AM
I think hes not posting anything because he sold it and doesnt want to say anything ;D j/k  ;)
Title: Re: BAHNER
Post by: 2savage4you on July 31, 2008, 11:57:27 AM
Nope  didn't sell her........  Just been having some vehicle problems.  Had to put the wife's van into the shop and the bill came up to $1880.67 :banghead: luckily the warranty covered some of it.

Thats why i have not done shit to the Bahner :'(
Started to do the wiring yesturday.....I ran out of shrink tubing so i had to just drink beer instead.
(http://i223.photobucket.com/albums/dd269/2savage4you/001-57.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-38.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-35.jpg)
Stopped of at Ace hardware and picked up some more so i can finish it today.  (maybe)

2sav
Title: Re: BAHNER
Post by: pw_Tony on July 31, 2008, 03:14:45 PM
Hey Steve... the Hondo's looking the same way, right before the AVI I had to reqire the whole thing >:(

And now just the short block is sitting in the boat....but hopefully it'll go back together tonight  :banghead:
Title: Re: BAHNER
Post by: flytime on August 15, 2008, 05:21:55 PM
Any news on the boat Steve? We are all in suspence ???

Bob
Title: Re: BAHNER
Post by: 2savage4you on August 15, 2008, 06:37:54 PM
Any news on the boat Steve? We are all in suspence ???

Bob

 No , not really . I did install a couple of fittings in the ram today ;D  Other than that not much to talk about.... This thread is so long now with out any good coming out of it yet , i just backed off of posting pics and such ::)

Right now im just running everything , hoses and wiring. And then im gonna pull the engine and rebuild her for next summer..Its been a hard road ALOT of speedbumps along the way that had nothing to do with the boat , but it made me push the boat back farther and farther.. O'well one day it will get wet or sold :D
(http://i223.photobucket.com/albums/dd269/2savage4you/plumb.jpg)
Title: Re: BAHNER
Post by: flytime on August 16, 2008, 04:19:48 PM
Just keep wittiling(sp) at it Steve. It WILL get done. We will try to be patient ;D
Title: Re: BAHNER
Post by: 2savage4you on August 24, 2008, 04:19:15 PM
 Wow 18 pages , is this a record yet  ???

Look what the Bahner got for her new motor. found it on P.B and it was local to me.. I stole all the kids lunch money to get it  and no , i don't feel bad  :D My new heads will be ready this week i hope , and then we start the new motor. I have people helping me with the new build so this is the one, Yeah its gonna happen.. believe it or not  :sly:
 Check it ..  Hey Proppy , you see this shit man.... Ford killer >:D
(http://i223.photobucket.com/albums/dd269/2savage4you/003-37.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-36.jpg)
I was going to put a SoCal sticker where the Rex sticker is , but they all fell behind the gun safe and um..... its not gonna move so  ........B-rad  ;D i need more stickers
(http://i223.photobucket.com/albums/dd269/2savage4you/005-25.jpg)
Its ok , dont get scared ford boys  O0
Title: Re: BAHNER
Post by: BOOST on August 24, 2008, 04:24:48 PM
almost their looks good ;D
Title: Re: BAHNER
Post by: HDriderTH on August 24, 2008, 04:25:41 PM
What the hell is all that shit in the scoop? I jus got fucd w/ by the PO PO for haveing my scoop forward/ no spark arresters, do they even make 'em for Dominaters?
Title: Re: BAHNER
Post by: 2savage4you on August 24, 2008, 04:34:05 PM
What the hell is all that shit in the scoop? I jus got fucd w/ by the PO PO for haveing my scoop forward/ no spark arresters, do they even make 'em for Dominaters?

Its a cover to keep lake lice and Fords out of the all mighty BBC  ;D
otherwise it will hick up and fart :o
(http://i223.photobucket.com/albums/dd269/2savage4you/006-20.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/007-19.jpg)
Title: Re: BAHNER
Post by: beerjet on August 24, 2008, 05:01:59 PM
Yes they do make flame arrestors for dominators . Call uuuuuumm ...... rex  :sly:

-beerjet-
Title: Re: BAHNER
Post by: HDriderTH on August 24, 2008, 05:11:13 PM
Yes they do make flame arrestors for dominators . Call uuuuuumm ...... rex  :sly:

-beerjet-

I dont want one..or two. I told Oppy I had some at the crib, played dumb. Prolly cut one in half and stick in the front of the scoop like this hillbillys window. I DO want that red canapy tho!
Title: Re: BAHNER
Post by: beerjet on August 24, 2008, 05:21:36 PM
I dont want one..or two. I told Oppy I had some at the crib, played dumb. Prolly cut one in half and stick in the front of the scoop like this hillbillys window. I DO want that red canapy tho!
Skippy beat ya to the punch  :-\

-beerjet-
Title: Re: BAHNER
Post by: HDriderTH on August 24, 2008, 05:35:23 PM
I know, I go out on the pond for a couple hours and everyboddy breaks out the goods.. :banghead:
Title: Re: BAHNER
Post by: 78CoLe on August 25, 2008, 09:44:08 AM
is that bahner ready for a ford a$Z woopin
Title: Re: BAHNER
Post by: 2savage4you on August 25, 2008, 09:58:47 AM
is that bahner ready for a ford a$Z woopin

You'r writing checks you can't cash ;D

Will be ready soon
Title: Re: BAHNER
Post by: Marcsrollin on August 25, 2008, 11:05:58 AM
You'r writing checks you can't cash ;D

Will be ready soon

That would be a good race , Jeremy's boat is slow! ::)
Title: Re: BAHNER
Post by: 2savage4you on August 25, 2008, 11:10:21 AM
That would be a good race , Jeremy's boat is slow! ::)

Nice try , i seen the vid  ;D
Title: Re: BAHNER
Post by: Marcsrollin on August 25, 2008, 11:52:56 AM
Nice try , i seen the vid  ;D

They played that video in fast forward!
Title: Re: BAHNER
Post by: propless on August 25, 2008, 07:30:53 PM
Check it ..  Hey Proppy , you see this shit man.... Ford killer >:D
(http://i223.photobucket.com/albums/dd269/2savage4you/003-37.jpg)

Its ok , dont get scared ford boys  O0

 LOL, you have got to be joking !!  You ain't scaring anybody with that stuff !!  You better keep that plastic window in that scoop so my roost don't drown that dump truck motor as I go flying past you !!  >:D

Better yet , why don't you just donate that hull to beerjet as his new race hull.  You know you wont finish it  ( I bet he could have it on the water in 3 days).

 Crazy kids  ::) ::) ;D
Title: Re: BAHNER
Post by: 78CoLe on August 26, 2008, 12:48:46 PM
looking good get it done need more boating local partners pm if you ever need something
Title: Re: BAHNER
Post by: 2savage4you on August 27, 2008, 07:31:05 AM
looking good get it done need more boating local partners pm if you ever need something

Thanks , i agree we need more people to hang with.......... Even though ita always gonna be a Ford VS Chevy kinda thing  ;D

Should be interesting..
Well i went out and checked on my heads yesturday , Elwood is kickin some ass ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/016-3.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-37.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/007-20.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/015-8.jpg)
Title: Re: BAHNER
Post by: 2savage4you on August 27, 2008, 07:32:10 AM
Guess which ones are in my heads  ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/025-1.jpg)


 ;)
Title: Re: BAHNER
Post by: 78CoLe on August 27, 2008, 08:57:17 AM
no its never about ford vs chevy in the valley its about the ford waiting for the chevy  ;D
Title: Re: BAHNER
Post by: 2savage4you on August 27, 2008, 09:00:19 AM
no its never about ford vs chevy in the valley its about the ford waiting for the chevy  ;D

At this time you'r right . I will give you that....

I am pulling the BBC out of the Bahner today for tear down.

Its gonna come back PISSED OFF  :o and hungry for a ford  ;D


Title: Re: BAHNER
Post by: pw_Tony on August 27, 2008, 09:50:55 AM
Elwood sure does love his Dicam  ;D
Title: Re: BAHNER
Post by: Brad @ SCJB on August 27, 2008, 09:57:11 AM
Elwood sure does love his Dicam  ;D

no kidding....looks like someone got beat in the face with those heads.
Title: Re: BAHNER
Post by: 2savage4you on August 27, 2008, 11:11:21 AM
Elwood sure does love his Dicam  ;D


It's really not dicam.....


Its Ford blood that these heads are going to spill ;D

Just getting them used to the taste :D
Title: Re: BAHNER
Post by: HDriderTH on August 27, 2008, 11:24:45 AM
Elmer lose a finger?
Title: Re: BAHNER
Post by: Brad @ SCJB on August 27, 2008, 11:28:01 AM

It's really not dicam.....


Its Ford blood that these heads are going to spill ;D

Just getting them used to the taste :D

all this ford smack talk....lets run.

you should be done with yours at about the same time as mine (NEVER!) lol
Title: Re: BAHNER
Post by: 2savage4you on August 27, 2008, 11:42:02 AM
all this ford smack talk....lets run.

you should be done with yours at about the same time as mine (NEVER!) lol


 ::)

LMAO


Bad thing is your probably right  ;D
Title: Re: BAHNER
Post by: propless on August 27, 2008, 07:05:14 PM

It's really not dicam.....


Its Ford blood that these heads are going to spill ;D

Just getting them used to the taste :D

 Not true !!!  Everyone knows Ford blood is Blue  ::) .   He must have struck a vein in those heads  ;D .
[attachimg=1]
Title: Re: BAHNER
Post by: 2savage4you on August 28, 2008, 11:12:45 AM
Not true !!!  Everyone knows Ford blood is Blue  ::) .   
(Attachment Link)


Thats because it's contaminated   :D
Title: Re: BAHNER
Post by: Brad @ SCJB on September 08, 2008, 11:35:04 AM
status update please.
Title: Re: BAHNER
Post by: 2savage4you on September 08, 2008, 11:37:04 AM
status update please.

I can't tell you , i would have to kill to many people knowing top secret info ;D
Title: Re: BAHNER
Post by: crewchief22 on September 08, 2008, 12:35:09 PM
I can't tell you , i would have to kill to many people knowing top secret info ;D

Translates to "I haven't had the (time, money, other...) to do anything in the last couple weeks"  ;D
Title: Re: BAHNER
Post by: 2savage4you on September 08, 2008, 03:04:39 PM
Translates to "I haven't had the (time, money, other...) to do anything in the last couple weeks"  ;D

 Time yes. money kinda..............OTHER BOAT is taking priority :banghead:

And all the Bahner needs is a shortblock i got the rest ;D
Title: Re: BAHNER
Post by: Nordie on September 14, 2008, 04:46:03 PM
and the plot continues to thinken
Title: Re: BAHNER
Post by: 2savage4you on September 14, 2008, 05:28:24 PM
Huh  ???  ::)
Title: Re: BAHNER
Post by: Nordie on September 14, 2008, 06:24:43 PM
someone please explain
Title: Re: BAHNER
Post by: 2savage4you on September 14, 2008, 06:32:36 PM
someone please explain

Explain what ?
Title: Re: BAHNER
Post by: 2savage4you on September 23, 2008, 03:29:30 PM
http://www.performanceboats.com/html/forums/showthread.php?t=19214

IM DONE
Title: Re: BAHNER
Post by: pw_Tony on September 23, 2008, 03:34:00 PM
I thought all you needed to do was finish the motor  ???
Title: Re: BAHNER
Post by: KonaCole on September 23, 2008, 03:53:29 PM
you were so close
Title: Re: BAHNER
Post by: beerjet on September 23, 2008, 03:54:23 PM
$50  :D

-beerjet-
Title: Re: BAHNER
Post by: KonaCole on September 23, 2008, 03:55:42 PM
$50  :D

-beerjet-
And you want the 468 >:D
Title: Re: BAHNER
Post by: beerjet on September 23, 2008, 04:19:24 PM
Thats the offer for the whole shebang !  ;D

-beerjet-
Title: Re: BAHNER
Post by: crewchief22 on September 23, 2008, 05:51:13 PM
Quick, somebody trade him something with a Ford in it so we can bag on him for that for a while  ;D


Back to reality,  2Sav-468Bahner-tahiti boy whatever,  I've sold couple projects and always end up kicking myself for not finishing them as planned.  I have been working on my 68 CJ5 for about 8 years now and am determined to finish it.  Sometimes its very hard but your a hell of a lot closer with this boat than the others. 

In my best Dr Phil voice  ;D  I think you need to get your sh** together and finish this boat just to show yourself and everyone else that you can do it (it will help get some people off your back to).  Then you can sell it or trade it and not have to take any sh** from anyone.

Good luck in whatever you do.
Title: Re: BAHNER
Post by: beerjet on September 23, 2008, 06:06:25 PM
Hey Chief , uuuuuh , bless your heart .  8)

-beerjet-
Title: Re: BAHNER
Post by: GlassCutter on September 23, 2008, 06:10:10 PM
All it needs is a shortblock???  How hard can it be to find a BBC shortblock???   Follow Chief's advice - finish this up first.  It doesn't have to be perfect.  Hell you live at the river, this could give your family hours/days of pleasure still this year and next.   Another boat is just another set of problems that right now are someone else's >:D

Finish this one and you will be much happier.   Or put your wife back on the site and maybe we can talk some sense into her.
Title: Re: BAHNER
Post by: Ralph Brunt on September 23, 2008, 06:46:49 PM
probably worth more finished too
Title: Re: BAHNER
Post by: propless on September 23, 2008, 07:08:32 PM
 Whats wrong now Bahner Boy ??  Quit your job today ?  Knock up the old lady again ?  Broke another car/truck ?  Theres lots of other things around there for you to sell (like that Tahiti  ::) )
 
This boat is not for sale !!!   Make him finish what he started this time !!!
Title: Re: BAHNER
Post by: 2savage4you on September 24, 2008, 07:39:25 AM
Whats wrong now Bahner Boy ??  Quit your job today ?  Knock up the old lady again ?  Broke another car/truck ?  Theres lots of other things around there for you to sell (like that Tahiti  ::) )
 
This boat is not for sale !!!   Make him finish what he started this time !!!

No nothing is wrong. ( Knock on wood ) Just tired of project boats and the woman BITCHEN :banghead:
If i can sell it i will buy this boat.
http://www.performanceboats.com/html/forums/showthread.php?t=15881

And if not, these were posted yesturday , and it makes me want to buy them and finish it :sly:
http://www.performanceboats.com/html/forums/showthread.php?t=19127

Soooo........... we shall see what happens. i dont expect much , not with the way things are going lately :screwy:
Title: Re: BAHNER
Post by: KonaCole on September 24, 2008, 07:46:33 AM
So, you are looking at a Southwind with a um... FORD.  Something doesn't seem right about this.
Title: Re: BAHNER
Post by: 2savage4you on September 24, 2008, 07:49:36 AM
So, you are looking at a Southwind with a um... FORD.  Something doesn't seem right about this.


It runs , whats wrong about that  ;D

And its a nice looking boat......... ???
Title: Re: BAHNER
Post by: KonaCole on September 24, 2008, 08:06:12 AM
Nothin, just giving you a hard time about Chevy today, Ford tomorrow.  But I am worse, I built an Olds
Title: Re: BAHNER
Post by: 2savage4you on September 24, 2008, 09:09:18 AM
Nothin, just giving you a hard time about Chevy today, Ford tomorrow.  But I am worse, I built an Olds

The Olds is what started it for me....... It blew up. If it was still running i would still have the same ol boat... And then i would be like you guys.
Title: Re: BAHNER
Post by: 82daytona on September 24, 2008, 09:12:05 AM
now its for sale on craigslist  ? what are you going to change your name to now  :screwy:
Title: Re: BAHNER
Post by: 2savage4you on September 24, 2008, 09:37:39 AM
now its for sale on craigslist  ? what are you going to change your name to now  :screwy:


Go back to

































2sav ;D
Title: Re: BAHNER
Post by: realHawaiianJet on September 28, 2008, 10:27:23 AM
Quitter!!!!!!!!!!!!!!!!!!!!!!!!!Quitter!!!!!!!!!!!!!!!!!!!!!!!!!Quitter!!!!!!!!!!!!!!!!!!!!!!!!!


Quitter

Main Entry: quit·ter
Pronunciation: \ˈkwi-tər\
Function: noun
Date: 1611

: one that quits ; especially : one that gives up too easily

http://www.merriam-webster.com/dictionary/quitter (http://www.merriam-webster.com/dictionary/quitter)
Title: Re: BAHNER
Post by: 2savage4you on September 28, 2008, 10:49:53 AM
Quitter!!!!!!!!!!!!!!!!!!!!!!!!!Quitter!!!!!!!!!!!!!!!!!!!!!!!!!Quitter!!!!!!!!!!!!!!!!!!!!!!!!!


Quitter

Main Entry: quit·ter
Pronunciation: \ˈkwi-tər\
Function: noun
Date: 1611

: one that quits ; especially : one that gives up too easily


Wow now thats a good inspiration ::)


HJ you suck!!!!! :D

http://www.merriam-webster.com/dictionary/quitter (http://www.merriam-webster.com/dictionary/quitter)
Title: Re: BAHNER
Post by: FORKEDUP on September 28, 2008, 10:53:28 AM
Quitter!!!!!!!!!!!!!!!!!!!!!!!!!Quitter!!!!!!!!!!!!!!!!!!!!!!!!!Quitter!!!!!!!!!!!!!!!!!!!!!!!!!


Quitter

Main Entry: quit·ter
Pronunciation: \ˈkwi-tər\
Function: noun
Date: 1611

: one that quits ; especially : one that gives up too easily

http://www.merriam-webster.com/dictionary/quitter (http://www.merriam-webster.com/dictionary/quitter)


you can also substitute in 2sav or 468bahner in its place and be correct
Title: Re: BAHNER
Post by: realHawaiianJet on September 28, 2008, 11:37:38 AM
Just trying to help. :D
Title: Re: BAHNER
Post by: 2savage4you on September 30, 2008, 07:57:23 PM
Haha , made you look..........

You seen the Bahner up on the right side of your screen and first thought was.....WTF is he doing or done now :screwy:


Nothing.............Im just phukin with you :D :D :D :D :D

Carry on ;)
Title: Re: BAHNER
Post by: pw_Tony on September 30, 2008, 08:01:42 PM
Haha , made you look..........

You seen the Bahner up on the right side of your screen and first thought was.....WTF is he doing or done now :screwy:


Nothing.............Im just phukin with you :D :D :D :D :D

Carry on ;)

Bastard got me  ;D
Title: Re: BAHNER
Post by: propless on September 30, 2008, 08:16:01 PM
Bastard got me  ;D

:(  Me too.
Title: Re: BAHNER
Post by: 2savage4you on October 06, 2008, 08:03:21 PM
Anybody know who Concept boats is , or where they are ?

This deal could fix my world of pain......
http://www.performanceboats.com/html/forums/showthread.php?t=20224

Buy the boat , drop the engine in the bahner , and sell the boat..

Problem fixed and the Bahner is wet :D
Title: Re: BAHNER
Post by: propless on October 06, 2008, 08:22:59 PM
 You might want to check that thread again  :o (BANNED !!)
Title: Re: BAHNER
Post by: 76 Bonneville on October 06, 2008, 08:24:55 PM
Looks like a Hornet with the dropped chine and the dam around the transom.
Title: Re: BAHNER
Post by: 2savage4you on October 06, 2008, 08:28:01 PM
You might want to check that thread again  :o (BANNED !!)

Yeah , i know.  Now my world just came to an end....

So much for the easy way out :D

 Well there's always the sunken V-drive :screwy:

Now you need to go to the other forum mister V-drive guy ;)
Title: Re: BAHNER
Post by: propless on October 06, 2008, 09:00:13 PM
 I love this thread, its like watching Wile E coyote building a boat  ;D ;D.  We need a web cam on you (duct taped to your head)

 Maybe you could just strap a bunch of those hobby rockets on it and call it done (http://i239.photobucket.com/albums/ff97/propless/lmao.gif) (http://i239.photobucket.com/albums/ff97/propless/lmao.gif)
Title: Re: BAHNER
Post by: crewchief22 on October 06, 2008, 09:04:51 PM
Brought to you by ACME Jet Boats  ;D
Title: Re: BAHNER
Post by: 82daytona on October 07, 2008, 03:49:02 AM
I love this thread, its like watching Wile E coyote building a boat  ;D ;D.  We need a web cam on you (duct taped to your head)

 Maybe you could just strap a bunch of those hobby rockets on it and call it done (http://i239.photobucket.com/albums/ff97/propless/lmao.gif) (http://i239.photobucket.com/albums/ff97/propless/lmao.gif)
lol  ;D
Title: Re: BAHNER
Post by: 2savage4you on October 07, 2008, 06:23:36 AM
Thanks, Asshole's
Title: Re: BAHNER
Post by: HDriderTH on October 07, 2008, 06:39:33 AM
It's all love.........
Title: Re: BAHNER
Post by: propless on October 07, 2008, 09:00:46 AM
Thanks, Asshole's
It's all love.........
Yea Steve, don't get all touchy.   You know we love you  :-* :-*


 Now get back to work  ;D
Title: Re: BAHNER
Post by: 2savage4you on October 07, 2008, 09:10:35 AM
Yea Steve, don't get all touchy.   You know we love you  :-* :-*


 Now get back to work  ;D

Yeah, feelings mutual , even though you guys are azzzhoollleeesssssss  :'(

One day you will see , ive got a top secret operation goin on down here........... :sly:

 :-*
Title: Re: BAHNER
Post by: FORKEDUP on October 07, 2008, 10:52:46 AM
Yeah, feelings mutual , even though you guys are azzzhoollleeesssssss  :'(

One day you will see , ive got a top secret operation goin on down here........... :sly:

 :-*

meth or heroin?     






cause we all no you aint finishing boats down there ;D
Title: Re: BAHNER
Post by: 2savage4you on October 07, 2008, 04:19:35 PM
meth or heroin?     
cause we all no you aint finishing boats down there ;D

Yeah you fuggers are funny.

If i can make just one more trip , i will have enough money too  ;D
Title: Re: BAHNER
Post by: 82daytona on October 07, 2008, 04:30:08 PM
meth or heroin?     
 haha good one bill  ;D





cause we all no you aint finishing boats down there ;D
Title: Re: BAHNER
Post by: propless on October 07, 2008, 07:01:02 PM
Yeah you fuggers are funny.

If i can make just one more trip , i will have enough money too  ;D

  Hes smuggling illegal immigrants with the sub !!    ;D ;D
Title: Re: BAHNER
Post by: 2savage4you on October 07, 2008, 07:18:08 PM
  Hes smuggling illegal immigrants with the sub !!    ;D ;D


Great thanks for giving up my secret operation......


Now i have to go back to the meth lab , just hope i didn't leave the stove on :o



 :D
Title: Re: BAHNER
Post by: bkplesh on October 07, 2008, 07:27:43 PM
does this boat run or what? It been longer than Rod post. What's the story ;D
Title: Re: BAHNER
Post by: 2savage4you on October 07, 2008, 07:33:51 PM
does this boat run or what? It been longer than Rod post. What's the story ;D

NO!!!!!...............ITS ...........NEVER...........GOING....... ..TO..........RUN
Title: Re: BAHNER
Post by: realHawaiianJet on October 08, 2008, 08:58:30 PM
NO!!!!!...............ITS ...........NEVER...........GOING....... ..TO..........RUN

Looks like it didn't sink in!!! :banghead: I guess I'll have to post it again. ;D

Quitter!!!!!!!!!!!!!!!!!!!!!!!!!Quitter!!!!!!!!!!!!!!!!!!!!!!!!!Quitter!!!!!!!!!!!!!!!!!!!!!!!!!


Quitter

Main Entry: quit·ter
Pronunciation: \ˈkwi-tər\
Function: noun
Date: 1611

: one that quits ; especially : one that gives up too easily ; also 2sav or 468bahner can be used in this definition

http://www.merriam-webster.com/dictionary/quitter (http://www.merriam-webster.com/dictionary/quitter)
Title: Re: BAHNER
Post by: realHawaiianJet on October 08, 2008, 09:00:08 PM
I love reading this thread!!! ;D I always get a good laugh out of you guys!!! ;D
Title: Re: BAHNER
Post by: 2savage4you on October 08, 2008, 09:07:59 PM
I love reading this thread!!! ;D I always get a good laugh out of you guys!!! ;D


Yeah , cause they are a bunch of unforgiving BONEHEADS :D
Title: Re: BAHNER
Post by: BOOST on October 08, 2008, 09:11:57 PM

Yeah , cause they are a bunch of unforgiving BONEHEADS :D
(Sensitive) Kinda like me never know what you want :banghead:
Title: Re: BAHNER
Post by: 2savage4you on October 08, 2008, 09:15:25 PM
Sensitive

Now thats funny,  Hey nice avatar   :sly:
Title: Re: BAHNER
Post by: BOOST on October 08, 2008, 09:18:58 PM
Now thats funny,  Hey nice avatar   :sly:
I'm all mess up I had 7 boats this year, I'm confused
Title: Re: BAHNER
Post by: 2savage4you on October 08, 2008, 09:22:10 PM
I'm all mess up I had 7 boats this year, I'm confused

No your not confused............Your addicted :D

Its all good ;)
Title: Re: BAHNER
Post by: BOOST on October 08, 2008, 09:23:55 PM
No your not confused............Your addicted :D

Its all good ;)
Try telling that to the wife
Title: Re: BAHNER
Post by: 2savage4you on October 08, 2008, 09:26:18 PM
Try telling that to the wife


Thats easy, try telling that to my crazy G/F :screwy:
Title: Re: BAHNER
Post by: BOOST on October 08, 2008, 09:30:17 PM

Thats easy, try telling that to my crazy G/F :screwy:
That explains it good luck thats why you got us over here for support
Title: Re: BAHNER
Post by: 2savage4you on October 10, 2008, 10:36:11 AM
That explains it good luck thats why you got us over here for support

 Yeah :banghead:

I have to tell everyone that i know they are here to help and push me to get this done. I know you guys want it on the water as i do.... And just want to say thanks for everyone's input, help, guidance and so on..



Even though most of the time i went another way  :screwy:  Yeah this boat could have been in the water months ago............BUT!!!!  I have a thick head :sly:
Certain people here have helped me ALOT!!  you know who you are :-*


 So i got to tell you. The Bahner is going to a better place, she will no longer be living in the land of the dead!!!!

So when you hear that BBC coming up behind you on the river, Dont say......

Is that a bird , is that a plane ?  Just say no ...... Thats the Bahner :D

Stay tuned for the next episode of...

"The Bahner trailers propless"
Love ya man ;)
Title: Re: BAHNER
Post by: FORKEDUP on October 10, 2008, 01:08:36 PM
i think all that meth your secretley making is going to your head :screwy: :sly:
Title: Re: BAHNER
Post by: 2savage4you on October 10, 2008, 01:20:36 PM
i think all that meth your secretley making is going to your head :screwy: :sly:


WHAT am i the only one seeing the purdy color's  ::)

Their real dam it!!!!

 ???
Title: Re: BAHNER
Post by: BOOST on October 10, 2008, 05:33:43 PM

WHAT am i the only one seeing the purdy color's  ::)

Their real dam it!!!!

 ???
I'm missing the hole thing whats your plan
Title: Re: BAHNER
Post by: propless on October 10, 2008, 08:12:53 PM
Yeah :banghead:

 So i got to tell you. The Bahner is going to a better place, she will no longer be living in the land of the dead!!!!


 Did you sell it or put it in storage  ???



Stay tuned for the next episode of...

"The Bahner trailers propless"
Love ya man ;)

 ::) ::) Someone better be building a blower motor for that thing !!  Or a BBF  ;D ;D . 
Title: Re: BAHNER
Post by: Brad @ SCJB on October 10, 2008, 08:42:15 PM
i have gotten more accomplished typing this post (live from the toilet at the wynn in las vegas - 1980nordic would be proud) then you have in this whole thread (all puns intended) ...do what youre going to do....quit talkin about it and just do it. we all love ya and want to see this or any project on this site to succeed. think of it as a support group!
Title: Re: BAHNER
Post by: 2savage4you on October 10, 2008, 08:45:02 PM
i have gotten more accomplished typing this post (live from the toilet at the wynn in las vegas - 1980nordic would be proud) then you have in this whole thread (all puns intended) ...do what youre going to do....quit talkin about it and just do it. we all love ya and want to see this or any project on this site to succeed. think of it as a support group!


 I need a twelve step course.........Don't i :D
Title: Re: BAHNER
Post by: blackbeard on October 10, 2008, 11:58:24 PM
nope you apparently need a 21 step(page) program.  :D
Title: Re: BAHNER
Post by: 2savage4you on October 11, 2008, 06:38:30 AM
nope you apparently need a 21 step(page) program.  :D

Maybe in Oklahoma city..............



But here in the cowboy country we call 21.......................the kill zone :sly:

Are you HJ's cousin   ???
Title: Re: BAHNER
Post by: realHawaiianJet on October 11, 2008, 06:54:58 AM
Maybe in Oklahoma city..............



But here in the cowboy country we call 21.......................the kill zone :sly:

Are you HJ's cousin   ???

Hey now, why'd ya have to drag me into this thing now??? :screwy:

I can't believe that somebody actually has a thicker skull than me. :banghead:

Good luck with whatever you finally decide to do. :D
Title: Re: BAHNER
Post by: 2savage4you on October 11, 2008, 07:11:20 AM
Hey now, why'd ya have to drag me into this thing now??? :screwy:

I can't believe that somebody actually has a thicker skull than me. :banghead:

Good luck with whatever you finally decide to do. :D


Thanks............

It's been decided and is happening TODAY!!!!!!!! :D
Title: Re: BAHNER
Post by: Brad @ SCJB on October 11, 2008, 10:33:46 AM

Thanks............

It's been decided and is happening TODAY!!!!!!!! :D

youre gunna get it wet?! see ya on the water!!  ;D
Title: Re: BAHNER
Post by: Nordie on October 11, 2008, 02:42:49 PM
i have gotten more accomplished typing this post (live from the toilet at the wynn in las vegas - 1980nordic would be proud)

hell yeah im damn proud, but how are you going to wipe if your computer is on your lap?
Title: Re: BAHNER
Post by: OC2Vegas on October 11, 2008, 04:41:02 PM
not a laptop, i believe he is doing what i am doing right now and using his cell phone...god we need help!
Title: Re: BAHNER
Post by: Nordie on October 12, 2008, 02:01:50 PM
where is bahner boy? Hm I hope he is doing what we all hope he is doing...
Title: Re: BAHNER
Post by: 2savage4you on October 12, 2008, 06:21:42 PM
where is bahner boy? Hm I hope he is doing what we all hope he is doing...

wHAT CONTEMPLATING SUICIDE :banghead:
Title: Re: BAHNER
Post by: Nordie on October 12, 2008, 06:29:28 PM
close but no cigar :screwy:
Title: Re: BAHNER
Post by: BOOST on October 12, 2008, 08:15:43 PM
 Hes holding out its getting old
Title: Re: BAHNER
Post by: 2savage4you on October 12, 2008, 08:24:58 PM
Hes holding out its getting old

Then stop posting ::)

 ;)
Title: Re: BAHNER
Post by: BOOST on October 12, 2008, 08:27:45 PM
Then stop posting ::)

 ;)
Ouch
Title: Re: BAHNER
Post by: 2savage4you on October 12, 2008, 08:29:27 PM
Ouch


 :-*

 :D  You will find out soon enough my friend ;)
Title: Re: BAHNER
Post by: pw_Tony on October 14, 2008, 08:15:45 PM
Sooooo.....  ???
Title: Re: BAHNER
Post by: BOOST on October 14, 2008, 08:16:55 PM
Still waiting :banghead:
Title: Re: BAHNER
Post by: 2savage4you on October 14, 2008, 09:43:12 PM
Still waiting :banghead:

Well ok you asked for it :sly:
Yesturday, it was windy as phuk. Couldn't do shit soooooo............

(http://i223.photobucket.com/albums/dd269/2savage4you/007-24.jpg)
Today........
(http://i223.photobucket.com/albums/dd269/2savage4you/001-71.jpg)
Here's Elwood (429heads) ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/004-46.jpg)
Here's some of the crap that came out of the water jackets :o
(http://i223.photobucket.com/albums/dd269/2savage4you/006-27.jpg)
Title: Re: BAHNER
Post by: 2savage4you on October 14, 2008, 09:47:59 PM
Gonna clean up the heads.
(http://i223.photobucket.com/albums/dd269/2savage4you/007-25.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/009-18.jpg)
This is gonna be a simple fix, only needing new gaskets to fresh again...
Look at what we found in the bottom of the pan...
(http://i223.photobucket.com/albums/dd269/2savage4you/010-12.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/011-13.jpg)
 I would bet money this happenned when Omar spun out, man that had to be VIOLENT.

Pulled the #1 rod cap and checked the bearing and it looks great ;)
Title: Re: BAHNER
Post by: 2savage4you on October 14, 2008, 09:51:42 PM
So all and all, everything looks really good, of course i have to repaint it. Cause that Ford blue just don't work for this Chebby guy :D

Ive got a new pump. another pan, and timing cover to go on it tomorrow. Finish the heads, install my hillbilly scoop and drop it in the Bahner...


WOOOO  HOOOOOO
Title: Re: BAHNER
Post by: GT Jets on October 14, 2008, 09:57:37 PM

WOOOO  HOOOOOO

Does this mean your going tits up?   ;D

(get it Wa Mu....?)

Or does it mean it was funded by the Feds?  ;D ;D

I thought it was funny....

Sweet 468, can't wait...

GT
Title: Re: BAHNER
Post by: beerjet on October 14, 2008, 09:59:22 PM
Looky looky  :o  I did have a couple bent motor mount bolts . Violent is a pretty good description of how it went down . In the time it took me to blink , I was airborne , the motor went silent , and ended up with my back against the motor . Good times  :screwy:

-beerjet-
Title: Re: BAHNER
Post by: GlassCutter on October 14, 2008, 10:02:02 PM
"Sweet 468" ???     Is that what he is calling himself NOW???   So hard to keep up  >:D




Seriously dude, good luck with this project.  Git'r done already !
Title: Re: BAHNER
Post by: 2savage4you on October 14, 2008, 10:02:26 PM
Looky looky  :o  I did have a couple bent motor mount bolts . Violent is a pretty good description of how it went down . In the time it took me to blink , I was airborne , the motor went silent , and ended up with my back against the motor . Good times  :screwy:

-beerjet-

Yeah as soon as i seen that, i knew you took a wild ride....... ;D

Atleast it was the boat that lost the battle and not you :-*

Thanks again ........ ;)
Title: Re: BAHNER
Post by: GT Jets on October 14, 2008, 10:04:17 PM
Looky looky  :o  I did have a couple bent motor mount bolts . Violent is a pretty good description of how it went down . In the time it took me to blink , I was airborne , the motor went silent , and ended up with my back against the motor . Good times  :screwy:

-beerjet-

So you're telling us you broke the motor with your ass....now that's impressive. ;D
Title: Re: BAHNER
Post by: beerjet on October 14, 2008, 10:07:34 PM
So you're telling us you broke the motor with your ass....now that's impressive. ;D
My glutes by themselves are impressive . Imagine them in action .

-beerjet-
Title: Re: BAHNER
Post by: GT Jets on October 14, 2008, 10:11:58 PM
My glutes by themselves are impressive . Imagine them in action .

-beerjet-

OK if we don't? :P
Title: Re: BAHNER
Post by: beerjet on October 14, 2008, 10:15:10 PM
OK if we don't? :P
You have not lived .  :P You have no idea how pumped I am that steve is inching his way towards taking a dip .  :'( I'm so proud of you  :'(

-beerjet-
Title: Re: BAHNER
Post by: 2savage4you on October 20, 2008, 06:07:23 PM
Here's some more progress pics as of today, could have more done but been under the weather all last week O0

Before (ugly Ferd blue)
(http://i223.photobucket.com/albums/dd269/2savage4you/001-73.jpg)
Now cast iron gray ;)............Better
(http://i223.photobucket.com/albums/dd269/2savage4you/004-48.jpg)
Put on the new oil pump and gasket.
(http://i223.photobucket.com/albums/dd269/2savage4you/003-50.jpg)
 Well she's half way there.
(http://i223.photobucket.com/albums/dd269/2savage4you/005-34.jpg)
Title: Re: BAHNER
Post by: 2savage4you on October 20, 2008, 06:09:52 PM
Tomorrow we start cleaning the heads up.
(http://i223.photobucket.com/albums/dd269/2savage4you/006-28.jpg)
All the exhaust valves are being replaced with these.
(http://i223.photobucket.com/albums/dd269/2savage4you/007-26.jpg)


Just a little bit longer ;)
Title: Re: BAHNER
Post by: Ralph Brunt on October 20, 2008, 06:40:54 PM
 ;D .
Title: Re: BAHNER
Post by: crewchief22 on October 20, 2008, 06:48:35 PM
Good job  ;D
Title: Re: BAHNER
Post by: 82daytona on October 20, 2008, 07:31:20 PM
are you working on the heads in your bedroom :-\
Title: Re: BAHNER
Post by: HDriderTH on October 20, 2008, 07:35:56 PM
are you working on the heads in your bedroom :-\

doesnt everybody? I knew a guy with a vise on his dresser.
Title: Re: BAHNER
Post by: 2savage4you on October 20, 2008, 07:40:23 PM
are you working on the heads in your bedroom :-\

Go back a page, on the bottom. 
http://www.socaljetboats.com/index.php?topic=2830.525

Elwood's garage ;)

My bedroom, are you kidding me........My G/F would flip :screwy:
Title: Re: BAHNER
Post by: 82daytona on October 20, 2008, 07:45:06 PM
Go back a page, on the bottom. 
http://www.socaljetboats.com/index.php?topic=2830.525

Elwood's garage ;)

My bedroom, are you kidding me........My G/F would flip :screwy:
23 pages I cant keep up any more
Title: Re: BAHNER
Post by: 2savage4you on October 20, 2008, 07:46:30 PM
23 pages I cant keep up any more

Then its working :D

Wait till this motor is finished and i sell it to :o
Title: Re: BAHNER
Post by: propless on October 20, 2008, 08:51:20 PM
Wait till this motor is finished and i sell it to :o

 That wouldn't surprise me at all  :-\ .
Title: Re: BAHNER
Post by: 2savage4you on October 21, 2008, 05:02:38 PM
Well we got the heads done today...
(http://i223.photobucket.com/albums/dd269/2savage4you/001-74.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-56.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-51.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-49.jpg)
Title: Re: BAHNER
Post by: 2savage4you on October 21, 2008, 05:04:45 PM
(http://i223.photobucket.com/albums/dd269/2savage4you/006-29.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/007-27.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/005-35.jpg)
And here they are............. Ready to be bolted up.
(http://i223.photobucket.com/albums/dd269/2savage4you/008-22.jpg)
Gonna try to find some ARP head bolts tomorrow, and then i can bolt them on and paint to match.

I owe alot of this progress to Elwood  (429heads)

Thanks buddy ;)
Title: Re: BAHNER
Post by: Ralph Brunt on October 21, 2008, 05:39:00 PM
great work guys,

why cant you use the stock head bolts ??? you dont have crazy compression do u ???
Title: Re: BAHNER
Post by: pw_Tony on October 21, 2008, 05:43:16 PM
That's one of them double throw me down, racey back cuts right thar.... where the hell is Elwood?  :screwy:
Title: Re: BAHNER
Post by: 76NORDIC on October 21, 2008, 06:16:35 PM
Hey 2sav go to headbolts.com, they have really good prices on the head bolts, both stock and ARP. They also have every bolt, fastener, woodruff key, you name it, for engines. I bought the stock head bolts from them and saved quite a bit on them ;D
Title: Re: BAHNER
Post by: 2savage4you on October 21, 2008, 07:14:59 PM
great work guys,

why cant you use the stock head bolts ??? you dont have crazy compression do u ???

Well i just thought everybody says to use the ARP bolts ???

I guess i can use the stockers and it would save me some money right there :D
Title: Re: BAHNER
Post by: 2savage4you on October 21, 2008, 07:16:20 PM
Hey 2sav go to headbolts.com, they have really good prices on the head bolts, both stock and ARP. They also have every bolt, fastener, woodruff key, you name it, for engines. I bought the stock head bolts from them and saved quite a bit on them ;D

Thanks , i will check em out ;)
Title: Re: BAHNER
Post by: 2savage4you on October 22, 2008, 05:01:59 PM
Just ordered the new ARP Headbolts and intake bolts from Jegs , should be here friday. Sooooooooo.....looks like the engine will be going into the Bahner sometime next week ;D

Now i just need to decide if i want to go with a elect pump or use the Edelbrock mech pump i have now ???
Im thinking electric.


IT'S ALMOST THERE BITCHES ;D

Hey Proppy dont be scared 8)
Title: Re: BAHNER
Post by: OC2Vegas on October 22, 2008, 05:13:32 PM
I got 5 bucks he sales it by Monday because he cant decide which pump to use!  ;D :D >:D

Title: Re: BAHNER
Post by: 76NORDIC on October 22, 2008, 05:14:44 PM
Hey 2sav were the bolts cheaper thru jegs than the place I told ya about ???  Just curious    mark
Title: Re: BAHNER
Post by: propless on October 22, 2008, 07:39:31 PM
IT'S AMOST THERE BITCHES ;D

Hey Proppy dont be scared 8)

 Nothing to be scared of 2sav, it'll never be done  ::).

I got 5 bucks he sales it by Monday because he cant decide which pump to use!  ;D :D >:D


  ;D ;D
Title: Re: BAHNER
Post by: 2savage4you on October 22, 2008, 07:50:36 PM
I got 5 bucks he sales it by Monday because he cant decide which pump to use!  ;D :D >:D

How's your boat coming along ???

Hey 2sav were the bolts cheaper thru jegs than the place I told ya about ???  Just curious    mark

Probably not , but i bought a few other things i needed to soooo........ ;)

Nothing to be scared of 2sav, it'll never be done  ::).

Reverse psychology huh ;D  NICE........

Title: Re: BAHNER
Post by: realHawaiianJet on October 22, 2008, 08:41:53 PM
You mean you're not done yet, jeez!!! :banghead: I figured after 1 week you'd be out on the water by now. Oh wait, I'm talking to 2sav, it'll be another 2 years, if he doesn't sell it first. :D J/K :-*


Congrats on continuing this project, and getting a new mill for it. ;D I can't wait to see the pics of it on the water!!!!!!!!!! >:D Now hurry the fuk up, I'm tired of waiting!!!!!! :mad: ;D

BTW, my vote is for the mechanical pump. ;)

Good luck Bahner!!!!!!!!! :)
Title: Re: BAHNER
Post by: Nordie on October 22, 2008, 08:59:38 PM
dear bahner boy,

either pump will make the thing fire...lets get the bad boy wet, and give some of us boys some closure

love
nordie
Title: Re: BAHNER
Post by: 76NORDIC on October 22, 2008, 09:05:19 PM
My vote is for the mechanical ;D  we are voting arent we :screwy:
Title: Re: BAHNER
Post by: beerjet on October 22, 2008, 09:39:26 PM
I ran stock bolts . Not that it matters now but ..... Mechanical pump brah !
I'm getting super fukin excited !

-beerjet-
Title: Re: BAHNER
Post by: OC2Vegas on October 22, 2008, 10:45:48 PM
How's your boat coming along ???

Sold...gone...looking for what I really want!
Title: Re: BAHNER
Post by: propless on October 22, 2008, 11:01:23 PM
 Oops I forgot to vote  ;).  Use the mech pump you already have !  We dont want to wait for you to order an electric one and than start a new thread on how to hook it up.   :-* ;D





 
Title: Re: BAHNER
Post by: crewchief22 on October 23, 2008, 05:52:43 AM
Oops I forgot to vote  ;).  Use the mech pump you already have !  We dont want to wait for you to order an electric one and than start a new thread on how to hook it up.   :-* ;D


X2   ;)
Title: Re: BAHNER
Post by: 2savage4you on October 23, 2008, 12:20:20 PM
Oops I forgot to vote  ;).  Use the mech pump you already have !  We dont want to wait for you to order an electric one and than start a new thread on how to hook it up.   :-* ;D


X2   ;)


You guy's feel better now ::)


JEALOUSY WILL GET YOU NO WHERE'S ;D :-*
Title: Re: BAHNER
Post by: 78CoLe on October 23, 2008, 12:29:15 PM
is that pos even real or are you photochopping pics of the neighbors boat
Title: Re: BAHNER
Post by: 2savage4you on October 23, 2008, 12:33:27 PM
is that pos even real or are you photochopping pics of the neighbors boat

You are more than welcome to come see it yourself.  Its in the drive can't miss it
Title: Re: BAHNER
Post by: propless on October 23, 2008, 01:07:31 PM

You guy's feel better now ::)


 Yes  ;D



 Now get back to work !!   Maybe this year Santa will bring you some gas if its done, or maybe that should be the Easter Bunny. 

Title: Re: BAHNER
Post by: 78CoLe on October 23, 2008, 01:31:46 PM
just messing with you bahner
Title: Re: BAHNER
Post by: beerjet on October 23, 2008, 03:42:11 PM
just messing with you bahner
Reality is , Jeremie wants to snuggle with you steve , just like he wants to snuggle with me . I'll be there to pour the inaugural tank of gas and give it it's (not technically) first foot mashing ! I can already hear the symphonic sounds of valvetrain chatter (http://www.socaljetboats.com/cpg/albums/userpics/10034/spoogeqe6.gif)

-beerjet-
Title: Re: BAHNER
Post by: 2savage4you on October 23, 2008, 04:27:44 PM
Reality is , Jeremie wants to snuggle with you steve , just like he wants to snuggle with me . I'll be there to pour the inaugural tank of gas and give it it's (not technically) first foot mashing ! I can already hear the symphonic sounds of valvetrain chatter (http://www.socaljetboats.com/cpg/albums/userpics/10034/spoogeqe6.gif)

-beerjet-

He won't admit it but he really wants to be a chevy guy deep down inside ;)

And yes you need to be here if at all possible, hell everybody should come..

But only Omar and myself can molest it ;D
Title: Re: BAHNER
Post by: OC2Vegas on October 23, 2008, 05:54:46 PM
And yes you need to be here if at all possible, hell everybody should come..
If that boat gets wet it will be one of the biggest events in SCJB history...at least as big an event as when Brad tried to rock crawl a jet boat!  ;D
Title: Re: BAHNER
Post by: 2savage4you on October 23, 2008, 07:50:17 PM
If that boat gets wet it will be one of the biggest events in SCJB history...at least as big an event as when Brad tried to rock crawl a jet boat!  ;D

Man that aint even cool........




























But it's funny as hell :D
Title: Re: BAHNER
Post by: 82daytona on October 23, 2008, 07:51:18 PM
 :D
Title: Re: BAHNER
Post by: realHawaiianJet on October 23, 2008, 07:51:48 PM
He won't admit it but he really wants to be a chevy guy deep down inside ;)

And yes you need to be here if at all possible, hell everybody should come..

But only Omar and myself can molest it ;D

Buy me a plane ticket and I'll show up too!!!! ;D
Title: Re: BAHNER
Post by: 2savage4you on October 23, 2008, 07:57:42 PM
Buy me a plane ticket and I'll show up too!!!! ;D

The bad thing is it's gonna be phukin cold here and the river is gonna be LOW!!!

 Might have to take it to the lake, and that would have to be first thing in the am ???

F-that next summer aint that far away.
Title: Re: BAHNER
Post by: OC2Vegas on October 23, 2008, 08:01:13 PM
Man that aint even cool........


But it's funny as hell :D

Thought you guys would get a kick out of it....Just yanking your chain Brad dont BAN me!
Title: Re: BAHNER
Post by: 2savage4you on October 23, 2008, 08:02:50 PM
Thought you guys would get a kick out of it....Just pulling your chain Brad you dont have the balls to BAN me!

Fixed it ::)


 :D
Title: Re: BAHNER
Post by: OC2Vegas on October 23, 2008, 08:03:41 PM
Fixed it ::)


 :D

 ;D
Title: Re: BAHNER
Post by: 82daytona on October 23, 2008, 08:04:30 PM
Thought you guys would get a kick out of it....Just yanking your chain Brad dont BAN me!
whos Brad  ;D
Title: Re: BAHNER
Post by: Nordie on October 23, 2008, 08:05:43 PM
there is nothing wrong with mojave...we just need some damn closure...it would be pretty awesome to see this thing run...im tired of everyone messing with the poor guy...i mean i can see why, but maybe just maybe we dont tease him for like a week or two, and ignore him on the site so he can spend more time working on the bahner and make some early morning passes over at kathrins landing...probably spelled that wrong but whatever...come on bahner boy "you can do it"
Title: Re: BAHNER
Post by: 2savage4you on October 23, 2008, 08:06:46 PM
whos Brad  ;D

Don't know. But i hear there is a guy named B-rad thats a bouncer at a gay bar in Vegas ???

What happens in Vegas stay's in Vegas...........Its ok ;)
Title: Re: BAHNER
Post by: OC2Vegas on October 23, 2008, 08:08:02 PM
If we were not here "motivating" steve that boat would never be done or hae been sold by now! When this thing gets done we should all buy steve a drink and then pat ourselves on the back for the "motivation"
Title: Re: BAHNER
Post by: 2savage4you on October 23, 2008, 08:09:27 PM
If we were not here "motivating" steve that boat would never be done or hae been sold by now! When this thing gets done we should all buy steve a drink and then pat ourselves on the back for the "motivation"

Maybe its done now hmm..

Im thirsty ;D
Title: Re: BAHNER
Post by: realHawaiianJet on October 23, 2008, 08:30:38 PM
The bad thing is it's gonna be phukin cold here and the river is gonna be LOW!!!

 Might have to take it to the lake, and that would have to be first thing in the am ???

F-that next summer aint that far away.

You big PUSSY!!!! >:D

It was cold as balls here last week when I took mine out, and I'm still alive and so is the boat. ;) It was a little hard to drive cause my foot was shaking so much, but she ran great in the cold. Hell I picked up 3 mph in the cold air, also after a 40 mile (round trip) run down the river.

Just put on a coat and wear some jeans, and you'll be fine. ;) It doesn't get cold in Arizona anyways, lol, J/K. ;D
Title: Re: BAHNER
Post by: 2savage4you on October 24, 2008, 02:17:02 PM
You big PUSSY!!!! >:D

It was cold as balls here last week when I took mine out, and I'm still alive and so is the boat. ;) It was a little hard to drive cause my foot was shaking so much, but she ran great in the cold. Hell I picked up 3 mph in the cold air, also after a 40 mile (round trip) run down the river.

Just put on a coat and wear some jeans, and you'll be fine. ;) It doesn't get cold in Arizona anyways, lol, J/K. ;D


You can't possibly think i won't get it wet ::) It can be phukin snowin and ill be out throwing a roost :D It has to be tested before next summer PERIOD...... its already had toooooo mmmuuuccchhhh down time now.

Look what the Fedex dude just brought me.   I think i love him :-*
Thread sealer, intake bolts, head bolts, and a new harmonic bolt&washer. My old one was ugly sooooo........
(http://i223.photobucket.com/albums/dd269/2savage4you/001-75.jpg)

I can almost feel the power of the BBC.

Ohhh my hair is standing up O0
Title: Re: BAHNER
Post by: beerjet on October 24, 2008, 05:22:08 PM
Ohhh my hair is standing up O0

Still  ???

-beerjet-
Title: Re: BAHNER
Post by: 429heads on October 24, 2008, 05:40:58 PM
Hey Steve can you come over early I need to go and help on the race car Super stock
#20 Perry Misner My heads on car last race to take the champion ship were # 1 now in points MOHAVE VALLEY Raceway Sat night Champions are crowned that night10/25/08 race  starts at 6:pm
Title: Re: BAHNER
Post by: 2savage4you on October 24, 2008, 05:48:23 PM
Hey Steve can you come over early I need to go and help on the race car Super stock
#20 Perry Misner My heads on car last race to take the champion ship were # 1 now in points MOHAVE VALLEY Raceway Sat night Champions are crowned that night10/25/08 race  starts at 6:pm

And this message was brought to you by :D










How about monday after work , tomorrow is my busy day :banghead:

Monday i could be there by 11am or around that  ;D

Or sunday morning ???

Title: Re: BAHNER
Post by: 429heads on October 24, 2008, 06:48:33 PM
You got it I had to beat to of them ford heads of your motor they said
it look good enough to screw. I said no he has preeety new bolts for it
see when you get here
Title: Re: BAHNER
Post by: beerjet on October 24, 2008, 08:30:51 PM
(http://www.socaljetboats.com/cpg/albums/userpics/10034/boat.gif)

-beerjet-
Title: Re: BAHNER
Post by: realHawaiianJet on October 24, 2008, 08:46:21 PM

You can't possibly think i won't get it wet ::) It can be phukin snowin and ill be out throwing a roost :D It has to be tested before next summer PERIOD...... its already had toooooo mmmuuuccchhhh down time now.

Look what the Fedex dude just brought me.   I think i love him :-*
Thread sealer, intake bolts, head bolts, and a new harmonic bolt&washer. My old one was ugly sooooo........

I can almost feel the power of the BBC.

Ohhh my hair is standing up O0

I need to post up some pics of what the UPS guy and the Fedex guy brought me on Wednesday and Thursday, you'll hate me. ;D They're so purdy and shiney!!! :D I'll get some pics tomorrow and post em up for you. ;)

Shit, I'm thinking about taking mine out tomorrow or Sunday, and I think the high is only gonna be 54*, but that won't be until like 4:00 pm. So it's gonna be a cold ride for sure. :P
Title: Re: BAHNER
Post by: beerjet on October 24, 2008, 09:02:16 PM
I'll sell you my boat so you have something to do over the winter .  :D

-beerjet-
Title: Re: BAHNER
Post by: realHawaiianJet on October 24, 2008, 09:13:00 PM
I'll sell you my boat so you have something to do over the winter .  :D

-beerjet-

Me or 2sav? ??? ;D I've got plenty to do over winter, gonna try to make my turd slightly less of a turd, wish me luck. :banghead:

I don't even know what you have. :P
Title: Re: BAHNER
Post by: realHawaiianJet on October 25, 2008, 09:11:30 PM
Ok Bahner boy, I posted my pics up in my little thread on this site. ;D
Title: Re: BAHNER
Post by: 2savage4you on October 26, 2008, 05:36:24 AM
Ok Bahner boy, I posted my pics up in my little thread on this site. ;D


Yeah , valve covers and a scoop ???


And whoever said you can't polish a turd is lying  :D


Im thinking of the same valve covers for my boat , Nice job HJ ;)
Title: Re: BAHNER
Post by: propless on October 26, 2008, 09:27:55 AM
 Yea, thats what you both need to solve your problems, new valve covers  ::) ::)
Title: Re: BAHNER
Post by: 2savage4you on October 26, 2008, 10:16:28 AM
Yea, thats what you both need to solve your problems, new valve covers  ::) ::)

Sarcastic much ::)


 :-* :D
Title: Re: BAHNER
Post by: propless on October 26, 2008, 10:35:17 AM
 Sorry, I'm just frustrated and sick of polishing parts for mine.  :banghead:

 You know I hope you get yours done soon so at least one of us can be on the water this year, I'm sick of looking at mine in 3 different rooms (but I wont give up !!! )
Title: Re: BAHNER
Post by: 2savage4you on October 26, 2008, 01:15:05 PM
Sorry, I'm just frustrated and sick of polishing parts for mine.  :banghead:

 You know I hope you get yours done soon so at least one of us can be on the water this year, I'm sick of looking at mine in 3 different rooms (but I wont give up !!! )

3 different rooms huh , it's a good thing your single. Or you would be anyways :D

Ok now on with the show!!!!!

Im putting my list together and need some info......

Bilge pump... 500 gph ok or need bigger, im even thinking of running 2 down the road ;)
Alternator ,how many amp and im thinking of getting the one wire dealio. Ive always used em sooooo...... How many amp alt ? i run 100 amp on my 4x4's cause of all the lights, so whats a good size for a boat thats not going to be overkill in the pocket book ???

 I need a single pulley for the alt/crank. Anybody got one cheap :-*


Damn , i picked the wrong day to stop sniffing glue.. I forgot what else i needed :banghead:

To be continued
Title: Re: BAHNER
Post by: GT Jets on October 26, 2008, 01:42:35 PM
3 different rooms huh , it's a good thing your single. Or you would be anyways :D

Ok now on with the show!!!!!

Im putting my list together and need some info......

Bilge pump... 500 gph ok or need bigger, im even thinking of running 2 down the road ;)
Alternator ,how many amp and im thinking of getting the one wire dealio. Ive always used em sooooo...... How many amp alt ? i run 100 amp on my 4x4's cause of all the lights, so whats a good size for a boat thats not going to be overkill in the pocket book ???

 I need a single pulley for the alt/crank. Anybody got one cheap :-*
Damn , i picked the wrong day to stop sniffing glue.. I forgot what else i needed :banghead:

To be continued

Hell if your talking bilge pumps and alternators, that fukr's getting close!

35 amp IMO is plenty of alternator, 360 GPH is plenty of bilge pump (unless you plan on having leaks), as far as the pulley, I would have to go scrounge...as far as the glue, switch to lake/river water and boat exhaust for crying out loud!!!!!!! ;D

Git-er' done!

GT
Title: Re: BAHNER
Post by: realHawaiianJet on October 26, 2008, 04:16:05 PM
I like my 625 gph bilge pump, I just flip the switch for a few seconds and it basically empties it out. I've also got a 500 gph, wired to a float switch but I've only used it once, when I got swamped by some asshole in another boat. :mad: And the big one could have handled it, but I wanted to get the water out fast.
Title: Re: BAHNER
Post by: FORKEDUP on October 26, 2008, 04:30:36 PM
i have three automatic 500 gph in forkedup and have never had a problem with them falling behind,  check thechromeguy.com he might have the pulley you are looking for, and he is very reasonable on $$$, he is right down the road so i can pick it up for you if you wanted and ship/mail it to you, just an option ;D
Title: Re: BAHNER
Post by: 2savage4you on October 27, 2008, 06:51:06 PM
i have three automatic 500 gph in forkedup and have never had a problem with them falling behind,  check thechromeguy.com he might have the pulley you are looking for, and he is very reasonable on $$$, he is right down the road so i can pick it up for you if you wanted and ship/mail it to you, just an option ;D

Thanks, i appreciate all the help i can get. And im going to need one soon.
Check it.............
(http://i223.photobucket.com/albums/dd269/2savage4you/005-36.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/006-30.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/007-28.jpg)
Should be finished tomorrow
Title: Re: BAHNER
Post by: OC2Vegas on October 27, 2008, 07:04:52 PM
Should be finished tomorrow

2Sav code for "3 Tuesdays from tomorrow"  :D
Title: Re: BAHNER
Post by: 76 Bonneville on October 27, 2008, 07:23:29 PM
Looking good 2 sav, temps are still in the 90's. You've got the weather on your side. Should be wet soon.
Title: Re: BAHNER
Post by: 76NORDIC on October 27, 2008, 07:36:17 PM
2Sav code for "3 Tuesdays from tomorrow"  :D
     Dont ya mean the second tuesday of next week ;D ;D ;D
Title: Re: BAHNER
Post by: 76NORDIC on October 27, 2008, 07:38:17 PM
Gotta say tho, its lookin good 2sav ;D
Title: Re: BAHNER
Post by: FORKEDUP on October 28, 2008, 08:50:12 AM
looking great there bahner boy, keep it up and it will be wet in no time ;D
Title: Re: BAHNER
Post by: 2savage4you on October 28, 2008, 05:53:58 PM
looking great there bahner boy, keep it up and it will be wet in no time ;D

Thanks , she's coming home tomorrow and back in the boat ;)
Finished her up today.
Cleaned the lifters and put them in with a little suger grease :D
(http://i223.photobucket.com/albums/dd269/2savage4you/001-76.jpg)
I was chasing some threads and dropped this in the port, man im glad that valve was closed :-[
Tried to fish it out with some super grease and a little brush..........Didn't work so i said F-it left it in there . I figure if it goes in the intake it will just come back out the exhaust :D
(http://i223.photobucket.com/albums/dd269/2savage4you/002-57.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-52.jpg)
Elwood(429heads) adjusted my valve's cause im like ??? ::)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-50.jpg)
And its done
(http://i223.photobucket.com/albums/dd269/2savage4you/005-37.jpg)
Title: Re: BAHNER
Post by: 76 Bonneville on October 28, 2008, 07:28:49 PM
So what are the specs on the motor?
Title: Re: BAHNER
Post by: 2savage4you on October 28, 2008, 07:41:35 PM
So what are the specs on the motor?


Ford Killer ;D

I will round them up and post em ;)
Title: Re: BAHNER
Post by: propless on October 28, 2008, 08:09:04 PM

Ford Killer ;D


 Here we go again  ::) ::) .  All I'm going to say this time is, prove it !!!  >:D
Title: Re: BAHNER
Post by: realHawaiianJet on October 28, 2008, 08:29:02 PM

Ford Killer ;D


It's gotta hit the water first! ;)

But seriously, looking good there Bahner boy!!!!! O0 But you still need to get that damn thing out of that intake port :screwy: ya damn quitter, lol!!!!! :banghead: ;D You did get it out of there, right? :sly:

Looks like I'm done for the winter. :'( It snowed here yesterday and it only got up to 42* here today. She's getting put up for the winter, damn I hope it fires up next year!!! :banghead:

Good luck on the install Bahner!!! :)
Title: Re: BAHNER
Post by: 2savage4you on October 29, 2008, 12:55:21 PM
It's gotta hit the water first! ;)

But seriously, looking good there Bahner boy!!!!! O0 But you still need to get that damn thing out of that intake port :screwy: ya damn quitter, lol!!!!! :banghead: ;D You did get it out of there, right? :sly:

Do you really think i should get it out ???

I figured it would just blow out.......... ::)
Title: Re: BAHNER
Post by: FORKEDUP on October 29, 2008, 01:29:35 PM
with all the time you have invested in this project, not to mention $$, i would spend the extra time and get it out, that way you know for sure, god forbid you leave it in there and something happens, you will always wonder if it was caused by impatience and not getting that out, and worst case it takes you and extra day to get on the water, bid deal its already taken  how long? just my .02 ;D
Title: Re: BAHNER
Post by: 2savage4you on October 29, 2008, 04:44:41 PM
Well , can't i just fire it up and mash the gas ???

That should do it ;)
Title: Re: BAHNER
Post by: 76NORDIC on October 29, 2008, 05:42:56 PM
You nut hut, ya need to get that out  :screwy:  use one of those long flexible magnets. and as for a Ford killer ::)    HA!!!  like what was said before it needs to get wet first ;D ;D ;D ;D ;D ;D
Title: Re: BAHNER
Post by: 2savage4you on October 29, 2008, 07:38:04 PM
It's too late, its already complete. Intake is on and ready to drop in the boat tomorrow ;)

The way i see it is, i got forged pistons and SS valves. That little bolt ain't gonna do shit :screwy:
Title: Re: BAHNER
Post by: 76NORDIC on October 29, 2008, 07:55:19 PM
Your joking right ??????????
Title: Re: BAHNER
Post by: OC2Vegas on October 29, 2008, 08:02:18 PM
Steves going to show us all a trick....How one lil bolt can implode a BBC, come on dude!
Title: Re: BAHNER
Post by: 2savage4you on October 29, 2008, 08:04:46 PM
Steves going to show us all a trick....How one lil bolt can implode a BBC, come on dude!

You guy's all act like its a big deal ???   What you never had extra parts left over after rebuilding something ???

Basically the samething, im just not throwing it in a box. it will come out :sly:
Title: Re: BAHNER
Post by: propless on October 29, 2008, 08:16:05 PM
 I cant believe you guys are falling for this  :screwy: .  Yea, I know its 2sav, but come on  ::) ::).
Title: Re: BAHNER
Post by: 2savage4you on October 29, 2008, 08:20:00 PM
I cant believe you guys are falling for this  :screwy: .  Yea, I know its 2sav, but come on  ::) ::).

LMAO :D :D :D :D :D

Good call Proppy, I was just having some fun. I can't believe you guys  >:D

Like im going to leave a bolt in my engine :screwy:
Title: Re: BAHNER
Post by: 2savage4you on October 29, 2008, 08:20:41 PM
And who's 2sav ???
Title: Re: BAHNER
Post by: 76NORDIC on October 29, 2008, 08:22:15 PM
Sure have had many extra parts, or bolts or whatever, but NEVER left IN the engine. I have done many R and R's . So riddle me this batman ;D  This bolt falls in and gets stuck between the valve and the seat ???   bent valve ??? say it makes it past the valve and is now bouncing around in the cylinder ???  dinged piston  ??? scratched cylinder walls ??? dinged piston near the ring land ??? so the ring does not move  Bolt happens to stand straight up when the piston goes up and piston, bolt valve combo all collide ??? gets stuck between the exh. valve and seat, bent valve ???   Just my .02 things that make ya go hmmmmmmm :sly:
Title: Re: BAHNER
Post by: 76NORDIC on October 29, 2008, 08:23:15 PM
I figured as much Batman ;D
Title: Re: BAHNER
Post by: propless on October 29, 2008, 08:25:40 PM
LMAO :D :D :D :D :D

Good call Proppy, I was just having some fun. I can't believe you guys  >:D

Like im going to leave a bolt in my engine :screwy:

 Now, what about the "exta bolts"  ;) ;D
Title: Re: BAHNER
Post by: 2savage4you on October 29, 2008, 08:27:13 PM
Sure have had many extra parts, or bolts or whatever, but NEVER left IN the engine. I have done many R and R's . So riddle me this batman ;D  This bolt falls in and gets stuck between the valve and the seat ???   bent valve ??? say it makes it past the valve and is now bouncing around in the cylinder ???  dinged piston  ??? scratched cylinder walls ??? dinged piston near the ring land ??? so the ring does not move  Bolt happens to stand straight up when the piston goes up and piston, bolt valve combo all collide ??? gets stuck between the exh. valve and seat, bent valve ???   Just my .02 things that make ya go hmmmmmmm :sly:

WOW , now that sounds seriouse, im glad i took it out ;D
Title: Re: BAHNER
Post by: 429heads on October 30, 2008, 01:51:15 AM
and put  two more in other side you got them good  :mad:
Title: Re: BAHNER
Post by: realHawaiianJet on October 30, 2008, 10:29:44 AM
Ok glad to hear it. I figured you got it out, but I just wanted to make sure. ::)

So....what's the name of this bitch.
Title: Re: BAHNER
Post by: 2savage4you on October 30, 2008, 10:37:11 AM
Ok glad to hear it. I figured you got it out, but I just wanted to make sure. ::)

So....what's the name of this bitch.

Dunno , but it should be........

getherwet
Title: Re: BAHNER
Post by: GlassCutter on October 30, 2008, 10:40:36 AM
Dunno , but it should be........

getherwet

How about  Wasted Time?  >:D
Title: Re: BAHNER
Post by: 2savage4you on October 30, 2008, 10:47:24 AM
How about  Wasted Time?  >:D

Thats what my G/F say's

Sooooo............ it must be a womans point of view ;D


J/K >:D
Title: Re: BAHNER
Post by: 2savage4you on October 30, 2008, 06:24:11 PM
Ain't she purdy ;D
(http://i223.photobucket.com/albums/dd269/2savage4you/003-53.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/004-51.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-58.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/005-38.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/007-29.jpg)
Title: Re: BAHNER
Post by: Brad @ SCJB on October 30, 2008, 06:28:01 PM
wait wait wait.....

wtf  ???

i cant believe my eyes.....it just cant be.....2sav progress?!?!

i havent bothered lookin at this thread in awhile cuz i just assumped it was just a bunch of hotrodding.

and i just so happened to check it out and my god...2sav has a motor in his boat.....and I dont.

2sav, you make me proud. keep it up. nevermind what everyone else says.  ;)
Title: Re: BAHNER
Post by: 2savage4you on October 30, 2008, 06:33:22 PM
2sav couldn't get his $hit together....

Thats why 468Bahner stepped up and took care of it :D

 thanks ;)
Title: Re: BAHNER
Post by: GT Jets on October 30, 2008, 06:33:40 PM
I like................................... ....................................... ......the invisible flywheel ;)

Looks good in there, now don't that feel better?

GT
Title: Re: BAHNER
Post by: 2savage4you on October 30, 2008, 06:37:09 PM
I like................................... ....................................... ......the invisible flywheel ;)

Looks good in there, now don't that feel better?

GT

Yeah i know, but i went from a flexplate to a flywheel . And now my bolts aren't long enough .So i need to get longer bolts and probably move the engine forward to make up for the flywheel :sly:
Title: Re: BAHNER
Post by: GlassCutter on October 30, 2008, 06:45:27 PM
Thats what my G/F say's

Sooooo............ it must be a womans point of view ;D


J/K >:D
We all decided long ago she was the smart one  :D    How often does she visit these days?  >:D
Title: Re: BAHNER
Post by: 82daytona on October 30, 2008, 06:56:48 PM
27 pages and still counting  :o :o :o :o
Title: Re: BAHNER
Post by: 2savage4you on October 30, 2008, 07:05:26 PM
27 pages and still counting  :o :o :o :o

Thanks for the news flash ;D
Title: Re: BAHNER
Post by: 76NORDIC on October 30, 2008, 07:05:44 PM
Oh hell he mustve photochopped those pics ;D ;D ;D
Title: Re: BAHNER
Post by: pw_Tony on October 30, 2008, 07:11:28 PM
This pic is Pure Sex

(http://i223.photobucket.com/albums/dd269/2savage4you/003-53.jpg)
Title: Re: BAHNER
Post by: OC2Vegas on October 30, 2008, 08:03:27 PM
ya, but i have personaly seen a motor in that boat before....whats new about this picture?
Title: Re: BAHNER
Post by: propless on October 30, 2008, 08:08:26 PM
ya, but i have personaly seen a motor in that boat before....whats new about this picture?

 It has a new scoop now  ::)
Title: Re: BAHNER
Post by: 82daytona on October 30, 2008, 08:29:27 PM
I think i may need to do a drive by and see if this is true  :)
Title: Re: BAHNER
Post by: BOOST on October 30, 2008, 11:38:40 PM
 I don't believe it
Title: Re: BAHNER
Post by: realHawaiianJet on October 31, 2008, 08:35:34 AM
Why do I feel like I've seen those pictures before??? ;D
Title: Re: BAHNER
Post by: 82daytona on October 31, 2008, 12:48:00 PM
where is 2sav to redeem himself  :sly:
Title: Re: BAHNER
Post by: OC2Vegas on October 31, 2008, 01:28:26 PM
where is 2sav to redeem himself  :sly:

hes busy photoshoping his boat so it looks likes hes out on the water
Title: Re: BAHNER
Post by: 2savage4you on October 31, 2008, 01:54:50 PM
hes busy photoshoping his boat so it looks likes hes out on the water

More like looking for a new place to store the boat :banghead:
Title: Re: BAHNER
Post by: 82daytona on October 31, 2008, 02:10:39 PM
you can get a 50' storage at bonanza for about 175 per month pretty sure they have smaller ones
Title: Re: BAHNER
Post by: 2savage4you on October 31, 2008, 02:18:08 PM
you can get a 50' storage at bonanza for about 175 per month pretty sure they have smaller ones

Will that come with a apartment ???  things are getting a little hot at home :sly:
Title: Re: BAHNER
Post by: 82daytona on October 31, 2008, 03:47:16 PM
no apt. but i know people do live in there
Title: Re: BAHNER
Post by: realHawaiianJet on October 31, 2008, 09:42:55 PM
You gotta get one of those climate controlled ones and "store" your couch and tv in there. ;)
Title: Re: BAHNER
Post by: 2savage4you on November 01, 2008, 10:15:39 AM
PTO bolts.............

Are they special or what ???  Now that i went from a flexplate to a flywheel , mine are too short :banghead: Can i get them from the hardware store, or do i have to order special Allen head bolts.

What im trying to say is.........Are they special or what ;D
Title: Re: BAHNER
Post by: flytime on November 01, 2008, 10:19:15 AM
Beaverretriever got his from Ace Hardware. The one by us has a great selection of stainless shit. Didnt seen to be anything special. But the WTF do I know ;D. Get going Steve your close now buddy.
Title: Re: BAHNER
Post by: HDriderTH on November 01, 2008, 10:19:44 AM
go to the auto parts store and pick some up   ;)
Title: Re: BAHNER
Post by: BOOST on November 01, 2008, 10:20:29 AM
PTO bolts.............

Are they special or what ???  Now that i went from a flexplate to a flywheel , mine are too short :banghead: Can i get them from the hardware store, or do i have to order special Allen head bolts.

What im trying to say is.........Are they special or what ;D
Try some harden grade 8 bolts they should do the job
Title: Re: BAHNER
Post by: HDriderTH on November 01, 2008, 10:21:57 AM
You gotta get one of those climate controlled ones and "store" your couch and tv in there. ;)


Boat too! I've lived in an industrial building w/ an office and a fold out couch.
Title: Re: BAHNER
Post by: 2savage4you on November 01, 2008, 10:24:32 AM

Boat too! I've lived in an industrial building w/ an office and a fold out couch.

Sounds like the makings for a good PORNO ;D

Thanks guys. I will hit up Ace in a few.. I wasn't sure if they were harden or just wtf ever you know what i mean ;)
Title: Re: BAHNER
Post by: HDriderTH on November 01, 2008, 10:29:46 AM
Sounds like the makings for a good PORNO ;D

Thanks guys. I will hit up Ace in a few.. I wasn't sure if they were harden or just wtf ever you know what i mean ;)

I seam to remember the weight bench more than the couch   ;)
Title: Re: BAHNER
Post by: 82daytona on November 01, 2008, 06:44:26 PM
i knew this thread would be at 28 pages before the weekend ends  :screwy:
Title: Re: BAHNER
Post by: realHawaiianJet on November 01, 2008, 06:59:16 PM
Not sure if you got them already, but go to Fastenal!!!!!! Here's their website, you should have one close to you somewhere, http://www.fastenal.com/ (http://www.fastenal.com/) I guarantee you that they will have them. ;) If I remember correctly, they are 7/16-20, and you'll have to determine your own length. I wouldn't use stainless for the drive line. Stainless is softer than grade 8 bolts, and you don't want to risk shearing any of those bolts off, so just get some black oxide grade 8 bolts, and never have to worry about it again.
Title: Re: BAHNER
Post by: 2savage4you on November 01, 2008, 08:57:05 PM
i knew this thread would be at 28 pages before the weekend ends  :screwy:

Well then , lets end it.........

$3000
Title: Re: BAHNER
Post by: realHawaiianJet on November 06, 2008, 08:57:02 PM
Been too quiet around here. :sly: It's been a few days with no updates or anything. So is this thing done yet? ::)
Title: Re: BAHNER
Post by: propless on November 06, 2008, 09:47:44 PM
  I think its for sale again  ::) ;D .
Title: Re: BAHNER
Post by: bkplesh on November 07, 2008, 05:21:55 AM
I thought rod was bad ;)  2sav, just go work on the boat and get-r-done. What's left? a motor?
Title: Re: BAHNER
Post by: 82daytona on November 07, 2008, 05:55:57 AM
its almost done unless something has changed in the last few days
Title: Re: BAHNER
Post by: 82daytona on November 07, 2008, 06:00:52 AM
maybe he has been at the lake testing
Title: Re: BAHNER
Post by: 2savage4you on November 07, 2008, 11:24:37 AM
maybe he has been at the lake testing


NOPE!!!!   :'( :'( :'(

I cant find the bolts i need... Im gonna have to order them..

Any body have these or know where to get them. Cap screw or socket head 7/16-20x 1 1/2"
Title: Re: BAHNER
Post by: realHawaiianJet on November 07, 2008, 11:30:54 AM

NOPE!!!!   :'( :'( :'(

I cant find the bolts i need... Im gonna have to order them..

Any body have these or know where to get them. Cap screw or socket head 7/16-20x 1 1/2"

Did you look at Fastenall? Do you guys even have Fastenalls out there? And there are other bolt places out there, I just can't think of them right now. :banghead:

Why don't you just use a flexplate and be done with it??? ???
Title: Re: BAHNER
Post by: Ralph Brunt on November 07, 2008, 11:39:26 AM

NOPE!!!!   :'( :'( :'(

I cant find the bolts i need... Im gonna have to order them..

Any body have these or know where to get them. Cap screw or socket head 7/16-20x 1 1/2"
try rexmar.com
Title: Re: BAHNER
Post by: 2savage4you on November 07, 2008, 11:43:01 AM
try rexmar.com

Thanks, found em  :-*
Title: Re: BAHNER
Post by: 2savage4you on November 07, 2008, 11:46:20 AM
How much space should there be between the drive shaft and bearing housing on the pump ? When i used the flexplate i had about a 1/4" now i have to move the engine forward :banghead:
Title: Re: BAHNER
Post by: HDriderTH on November 07, 2008, 12:52:57 PM
jus put the flexplate on and lets go   :banghead:
Title: Re: BAHNER
Post by: 2savage4you on November 07, 2008, 12:55:04 PM
jus put the flexplate on and lets go   :banghead:


Wish it was that simple,  but i sold it.......

I want to keep it just like Omar had it ;)
Title: Re: BAHNER
Post by: realHawaiianJet on November 07, 2008, 01:16:54 PM
How much space should there be between the drive shaft and bearing housing on the pump ? When i used the flexplate i had about a 1/4" now i have to move the engine forward :banghead:

Cut down the splined end of the drive shaft to create the clearance required. :P Don't go moving engines and shit like that, you're making this more difficult than it needs to be. How much thicker is the flywheel than the flexplate was?

Good luck. :)
Title: Re: BAHNER
Post by: 2savage4you on November 07, 2008, 01:22:21 PM
Cut down the splined end of the drive shaft to create the clearance required. :P Don't go moving engines and shit like that, you're making this more difficult than it needs to be. How much thicker is the flywheel than the flexplate was?

Good luck. :)

Maybe thats how you do it in Kentucky , but here i just move the engine forward 1/2" before cutting on the drive shaft ???

But i think the best solution is to buy another flexplate...  But then i run into it hitting the motor plate , which i will have to cut :sly:
Title: Re: BAHNER
Post by: realHawaiianJet on November 07, 2008, 01:32:22 PM
Maybe thats how you do it in Kentucky , but here i just move the engine forward 1/2" before cutting on the drive shaft ???

But i think the best solution is to buy another flexplate...  But then i run into it hitting the motor plate , which i will have to cut :sly:

Whatever is easiest for you, I wanna see this thing on the water!!!!!!!! >:(

Why in the hell does it hit the motor plate??? And where???
Title: Re: BAHNER
Post by: propless on November 15, 2008, 06:08:07 PM
 What happened here, did this project become Top Secret or something ??

 Is it done yet ?  :-\

 Does it run yet ?   :-\

 Does it float ?   :-\

 Did you sell the motor again ?   >:D

Title: Re: BAHNER
Post by: 2savage4you on November 15, 2008, 06:21:36 PM
What happened here, did this project become Top Secret or something ??

 Is it done yet ?  :-\

 Does it run yet ?   :-\

 Does it float ?   :-\

 Did you sell the motor again ?   >:D




Top secret , no. Its called 5 kids with a birthday and christmas next month :banghead:

Is it done yet?  um, no!!

Does it run yet?  Dunno ???

Does it float ?   I sure hope it does :sly:

Did you sell the motor again ? Nope not yet ;D

 For sale........$30K :D
Title: Re: BAHNER
Post by: propless on November 15, 2008, 06:46:28 PM
 Tell all those kids they have the same birthday (exactly 6 mos from Xmas) so you only have to buy gifts twice a year.  ;D
Title: Re: BAHNER
Post by: beerjet on November 15, 2008, 07:06:18 PM
2Sav's pad is very busy when there isnt any birthdays and holidays . Kudos to you , Taking care of home first.

I'm will to lay down some coin (that I dont have) that the Bahner spanks all the trash talkers  >:D Bring your fukin money and dont get too attached to it cuz you wont be goin home with it  8)

-beerjet-
Title: Re: BAHNER
Post by: 2savage4you on November 16, 2008, 01:15:42 AM
Thanks Omar,  ;)

The only betting were going to do is Gangsta shit . 8 Ball in a brown bag :sly:

Better save up bitches :D  Im going to work............


Peace O0
Title: Re: BAHNER
Post by: 2savage4you on November 16, 2008, 03:02:08 PM
Finally got the flexplate to stop hitting the mount, I ended up cutting it.. I dont remember who told me to cut it but thanks ;)

Now alt,wire,plumbing and something else and she should be ready ???

(http://i223.photobucket.com/albums/dd269/2savage4you/002-60.jpg)
I ended up using a differen't flexplate and no shim, but now my driveshaft looks short. I think its ok   ???  Its gonna have to do for now. Take a look, im not changing shit though :sly:
(http://i223.photobucket.com/albums/dd269/2savage4you/003-55.jpg)
Title: Re: BAHNER
Post by: GT Jets on November 16, 2008, 03:17:50 PM
Yeah, I agree, the driveline is way too short, that there is just dangerous :o

Is the angle of the driveshaft as harsh as it looks? I'm hoping it's an optical illusion.... ???

Looking good, can't wait, the anticipation is killing me :banghead:

GT
Title: Re: BAHNER
Post by: propless on November 16, 2008, 03:40:00 PM
 Its nice to your still working on it !!  ;D ;D

I have to agree with Gt (again) on the angle/offset of that drive line Steve (looks like alot of angle). And does that pumps front bearing seal go to the shaft ?  It doesn't look like the drive line would fit in there . ???   How far is that pump shaft inside the drive line ?

 Another thing, how much clearance is there between the flexplate and that line directly under it (fuel line ?) .   
Title: Re: BAHNER
Post by: 2savage4you on November 16, 2008, 03:54:28 PM
Hard to tell with the angle, i only have the drive shaft set in nothing is bolted up tight but it dont look that bad looking at it ( not the pic )

No the shaft wont fit in the bearing housing . Pump shaft is farther in than it looks.

As for the fuel line, it will be re'routed to a fuel valve on the transome , but it has plenty of clearance now, i think these pics are playing with your eyes ???
Title: Re: BAHNER
Post by: Ralph Brunt on November 16, 2008, 04:38:09 PM
i dont like the angle either, but if it doesn't viberate run it. ive seen worse and they said they had no problems
Title: Re: BAHNER
Post by: 2savage4you on November 16, 2008, 04:41:14 PM
Tomorrow i will bolt it up tight and get a better pic of the driveshaft. If its not to your liking i will re adjust it.....

Remember , i want this done right the first time ;)

Thanks.
Title: Re: BAHNER
Post by: BOOST on November 16, 2008, 04:53:18 PM
Looking good are you just mocking it up, are do you plan on running it with the drive line installed?
Title: Re: BAHNER
Post by: 2savage4you on November 16, 2008, 04:56:38 PM
Looking good are you just mocking it up, are do you plan on running it with the drive line installed?

Just trying to get shit lined up first, When it comes time to fire it up.... The drive will come out  ;)

And im gonna get soooooo................ drunk that night :D
Title: Re: BAHNER
Post by: Ralph Brunt on November 16, 2008, 04:59:42 PM
Tomorrow i will bolt it up tight and get a better pic of the driveshaft. If its not to your liking i will re adjust it.....

Remember , i want this done right the first time ;)

Thanks.
put the drive shaft +/- 1* of the pump shaft
Title: Re: BAHNER
Post by: 2savage4you on November 16, 2008, 05:15:00 PM
Maybe i should get a new drive shaft while im at it  ???

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=130269260985

Oh SHIT!!!! coming up on 30 pages :o


Im never gonna hear the end of this..........2sav novel writer ;D
Title: Re: BAHNER
Post by: BOOST on November 16, 2008, 05:20:53 PM
Maybe i should get a new drive shaft while im at it  ???

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=130269260985

Oh SHIT!!!! coming up on 30 pages :o


Im never gonna hear the end of this..........2sav novel writer ;D
A new will run about $150.00 are so,are you could have it rebuilt for about $30.00
Title: Re: BAHNER
Post by: beerjet on November 16, 2008, 06:20:38 PM
I'd wack a 1/4" off the rear plates to bring the rear of the motor down . Just me though .  :-\

-beerjet-
Title: Re: BAHNER
Post by: BOOST on November 16, 2008, 06:27:26 PM
I'd wack a 1/4" off the rear plates to bring the rear of the motor down . Just me though .  :-\

-beerjet-
Make sure you check the loader bearing clearance.
.
Title: Re: BAHNER
Post by: 2savage4you on November 16, 2008, 06:41:40 PM
I'd wack a 1/4" off the rear plates to bring the rear of the motor down . Just me though .  :-\

-beerjet-


Sounds like the best way to go 

We will see tomorrow :sly:

Loader bearing thats funny :screwy:
Title: Re: BAHNER
Post by: propless on November 16, 2008, 07:01:13 PM
 Steve,  check your angles before cutting anything.

 I dont know if its right or not, but here's mine when we were making the templates for the motor plates.  To make things easy I set the trailer so that the pump shaft was at 0 deg, than set the motor at 0 deg and adjusted motor height until I had around 2 deg on the drive shaft.

[attachimg=1]   
Title: Re: BAHNER
Post by: Brad @ SCJB on November 16, 2008, 07:13:01 PM
2sav....i felt your pain this weekend.....shit in bullhead moves at a fockin snails pace  :banghead:
Title: Re: BAHNER
Post by: Ralph Brunt on November 16, 2008, 07:15:20 PM
Steve,  check your angles before cutting anything.

 I dont know if its right or not, but here's mine when we were making the templates for the motor plates.  To make things easy I set the trailer so that the pump shaft was at 0 deg, than set the motor at 0 deg and adjusted motor height until I had around 2 deg on the drive shaft.

(Attachment Link)    
look at you getting all technical and shit ;)
whats up jeff ;)
Title: Re: BAHNER
Post by: propless on November 16, 2008, 07:29:13 PM
look at you getting all technical and shit ;)
whats up jeff ;)

 I think I be learnin sumthings  ::) .

   But am I right.  I dont want to give bad advice  :-\ .
Title: Re: BAHNER
Post by: Ralph Brunt on November 16, 2008, 07:40:35 PM
I think I be learnin sumthings  ::) .

   But am I right.  I dont want to give bad advice  :-\ .
sound advise as far as im concerned
Title: Re: BAHNER
Post by: GlassCutter on November 16, 2008, 08:34:00 PM
This is so monumental I think I might get drunk to celebrate when you finish it too.  One beer for every rude comment I posted aimed your way  >:D      But I can't start til you actually run her.   I am going shopping now in preparation  ;D

This is a big deal tho so NO domestic shit.   Maybe some Fat Tire         yeah that's the ticket.
Title: Re: BAHNER
Post by: 76NORDIC on November 16, 2008, 08:42:02 PM
Maybe some Fat Tire         That brew is some good stuff ;D ;D ;D
Title: Re: BAHNER
Post by: propless on November 16, 2008, 08:45:38 PM
 
    But I can't start til you actually run her.   I am going shopping now in preparation  ;D

This is a big deal tho so NO domestic shit.   Maybe some Fat Tire         yeah that's the ticket.

Yea right, no drinking until 2sav finishes his boat (http://i239.photobucket.com/albums/ff97/propless/lmao.gif) (http://i239.photobucket.com/albums/ff97/propless/lmao.gif) (http://i239.photobucket.com/albums/ff97/propless/lmao.gif)
Title: Re: BAHNER
Post by: GT Jets on November 16, 2008, 08:45:46 PM
Wanted the honor of taking the 30th page ;D ;D

A real good backwoods way to check driveline angle would be to use a 6" "pretty close" (thats a digital caliper to you all) and measure from cup to cup on the u-joints, I have done it this way before (makes people look at you funny).

Just measure with the moving joints at top to bottom, shoot for about 1/32" difference with "0" from side to side....
Looking good, I can almost hear it from here.

GT
Title: Re: BAHNER
Post by: Brad @ SCJB on November 16, 2008, 08:50:15 PM
30?
Title: Re: BAHNER
Post by: propless on November 16, 2008, 08:53:33 PM
  29 pages so far and 30 more to go  >:D ;D
Title: Re: BAHNER
Post by: crewchief22 on November 16, 2008, 09:09:58 PM
Good progress, keep it up  ;D




I got the first post on page 30, what do I win?
Title: Re: BAHNER
Post by: GT Jets on November 16, 2008, 09:13:57 PM
Good progress, keep it up  ;D




I got the first post on page 30, what do I win?

Dammit, missed by only a couple :banghead: :banghead: :banghead: Oh well, I'll catch it on the next 30 ;D
Title: Re: BAHNER
Post by: crewchief22 on November 16, 2008, 09:19:07 PM
I'm sure we'll hit 40 pages before it gets wet  ;D
Title: Re: BAHNER
Post by: beerjet on November 16, 2008, 11:05:12 PM
[size=9]COME ON
STEVE !
[/size]

-beerjet-
Title: Re: BAHNER
Post by: HDriderTH on November 17, 2008, 09:32:25 AM
Get that fukr runnin so Omar can "break it in" for you at Parker.  :o
Title: Re: BAHNER
Post by: 2savage4you on November 17, 2008, 11:11:15 AM
Get that fukr runnin so Omar can "break it in" for you at Parker.  :o


Yeah that would be fukin cool
Title: Re: BAHNER
Post by: beerjet on November 17, 2008, 11:14:57 AM
(http://www.socaljetboats.com/cpg/albums/userpics/10034/blower.gif)

-beerjet-
Title: Re: BAHNER
Post by: 2savage4you on November 17, 2008, 01:18:01 PM
Well maybe i think i might have found a solution to the driveshaft angle...

Are the plates supposed to sit on the rail ? as you can see mine are elevated about a 1/2" or so..

If you remember when i got this boat it came with those custom angle iron feet :banghead: i replaced them with the right ones but never drilled new holes. I think just by dropping the engine down and making it flush with the rail , it should fix my angle prob ???

Check it.
(http://i223.photobucket.com/albums/dd269/2savage4you/001-78.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/002-61.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-56.jpg)
Title: Re: BAHNER
Post by: HDriderTH on November 17, 2008, 03:38:59 PM

Yeah that would be fukin cool
[/quote



Well les get busy then, les do dis thang. I'd roll down for that.
Title: Re: BAHNER
Post by: realHawaiianJet on November 17, 2008, 06:54:31 PM
Looking good there Steve!!!! O0 Glad to see it finally coming together, and that you're getting the bugs worked out. Have you started the engine yet? When you do, we better get a video of that thing!!!!!!!! >:D

I think by the time this thing hits the water, i'll be able to legally have a beer for ya lol. :D But I better not be able to, that's still 4 months away, today. :banghead:
Title: Re: BAHNER
Post by: propless on November 17, 2008, 07:01:22 PM
Well maybe i think i might have found a solution to the driveshaft angle...

Are the plates supposed to sit on the rail ? as you can see mine are elevated about a 1/2" or so..

If you remember when i got this boat it came with those custom angle iron feet :banghead: i replaced them with the right ones but never drilled new holes. I think just by dropping the engine down and making it flush with the rail , it should fix my angle prob ???

 I think you found your problem  ;D.   If the plates were siting on the rails before than they should be on them now.  But I still think you should check the angles just to be sure. 
Title: Re: BAHNER
Post by: 2savage4you on November 18, 2008, 02:09:04 PM
I hate this phuking boat :banghead: :banghead:  i dropped the engine down and sat it on the rail.. Now i have a gap between the plates and feet... So i
either i installed the rail backwards when i took it out or the guy before me did... So now im going to notch out the front plate and raise the rear a hair. That should give
me the angle i need for the drive shaft ???  I really wish someone would buy this fukin nighmare, im so fukin sick of working on it and nothing comes out right :mad:  FUK!!!!!!!!!!!!!!!!!!!!!
(http://i223.photobucket.com/albums/dd269/2savage4you/001-79.jpg)
(http://i223.photobucket.com/albums/dd269/2savage4you/003-57.jpg)

Does this look like its down too far?
(http://i223.photobucket.com/albums/dd269/2savage4you/002-62.jpg)
Title: Re: BAHNER
Post by: beerjet on November 18, 2008, 03:06:54 PM
Easy there killer ! Your on the right track . Make it right not make it work . It looks like to me that the entire motor is sitting too high .

This looks alot better !

(http://i223.photobucket.com/albums/dd269/2savage4you/002-62.jpg)

-beerjet-
Title: Re: BAHNER
Post by: HDriderTH on November 18, 2008, 03:13:08 PM
Good loard...... :banghead:
Title: Re: BAHNER
Post by: pw_Tony on November 18, 2008, 05:38:19 PM
Keep going Steve! It'll be done before you know it! Just like always, if yah need some help... or some beer just give me a call  ;D
Title: Re: BAHNER
Post by: Ralph Brunt on November 18, 2008, 05:41:05 PM
not sure what your talking about, but just tighten the plate to the feet it will pull in. or you have to cut the feet aka pillow blocks
Title: Re: BAHNER
Post by: BOOST on November 18, 2008, 06:00:06 PM
 come on Bro easy fix, take  your time wait wrong words you can do it  ^-^
Title: Re: BAHNER
Post by: 2savage4you on November 18, 2008, 06:22:38 PM
Keep going Steve! It'll be done before you know it! Just like always, if yah need some help... or some beer just give me a call  ;D

Thanks Tony ;)

Title: Re: BAHNER
Post by: 2savage4you on November 18, 2008, 06:24:17 PM
not sure what your talking about, but just tighten the plate to the feet it will pull in. or you have to cut the feet aka pillow blocks

Yeah the gap between the feet and plate is crazy, I think i will notch the front plate out tomorrow and bolt this bitch up or blow it up :sly:
Title: Re: BAHNER
Post by: Ralph Brunt on November 18, 2008, 07:10:59 PM
Yeah the gap between the feet and plate is crazy, I think i will notch the front plate out tomorrow and bolt this bitch up or blow it up :sly:
before you cut the plate take it off and bolt the rear down flush, then check the angle of the drive line. it may be out of wack
Title: Re: BAHNER
Post by: GT Jets on November 18, 2008, 07:18:13 PM
Yeah the gap between the f :)eet and plate is crazy, I think i will notch the front plate out tomorrow and bolt this bitch up or blow it up :sly:

Don't be so "quick to hack", measure three times, cut once  ;)

I think something is still screwy  :screwy: I have a solid driveline that can be used for alignment, maybe someone around you has made one????

Anyone???? Mine is welded square tubing with the U-joint ends set at 2* offset (made it myself for doing fast installs).

Patients my bro, patients  :)
Title: Re: BAHNER
Post by: realHawaiianJet on November 18, 2008, 08:21:37 PM
Sorry, I looked again and they both look wrong, but it's hard to tell since the drive line is not bolted up flush. But it looks to me like the rear needs to be raised and leave the front sitting on the rail. That would also help the gap between the plates and the blocks. ;)
Title: Re: BAHNER
Post by: jrork on November 19, 2008, 06:30:54 AM
Hang in there. You're almost there and your work will be worth it.  I have nuthing to offer that the others havent but my wishes of good luck.  It's really looking good.
Title: Re: BAHNER
Post by: GlassCutter on November 19, 2008, 09:21:53 AM
Forty days til Xmas   Or forty pages on the Bahner.  Which will come first?   Will the boat be done before either of those milestones?   Anybody got an over/under number?   Shiat I'll bet on anything  :screwy:
Title: Re: BAHNER
Post by: 2savage4you on November 19, 2008, 10:02:18 AM
Forty days til Xmas   Or forty pages on the Bahner.  Which will come first?   Will the boat be done before either of those milestones?   Anybody got an over/under number?   Shiat I'll bet on anything  :screwy:

Yeah your right.

Fuck it im done!!!
Title: Re: BAHNER
Post by: GlassCutter on November 19, 2008, 10:43:32 AM
Yeah your right.

**** it im done!!!

NOOOOOO    not yet I haven't even drawn up the pool yet  >:D
Title: Re: BAHNER
Post by: 2savage4you on November 19, 2008, 11:46:18 AM
NOOOOOO    not yet I haven't even drawn up the pool yet  >:D

Thats funny...I aint gonna quite...... Somebody has to give you guys something to talk shiut about ;D

Now draw up the pool so i can empty it :sly:
Title: Re: BAHNER
Post by: realHawaiianJet on November 19, 2008, 04:35:47 PM
Your thread is the equivalent of my thread over on PB lol. :P Oh except for my boat got wet, hahahahaha!!!! ;D

Just fuckin' with ya, you're almost there Bahner boy lol. I know you can do it, you've got plenty of help out there on the west coast. ;)
Title: Re: BAHNER
Post by: 2savage4you on November 19, 2008, 07:36:36 PM
you've got plenty of help out there on the west coast. ;)

Internet help , but im solo when it comes to hands on help..... Cut the front plate today and set it back in :sly:

Now i got alot more to do :banghead: I guess i need to get a angle finder or whatever you use to install the engine. I about dropped the engine through the boat today when the picker decided it was tired of holding the engine. Talk about a wake up call ???
Title: Re: BAHNER
Post by: flytime on November 19, 2008, 08:11:58 PM
Dont hurt yourself Steve. Your'e almost home buddy. Go to the parts store or wherever and pick yourself up one of these.

Bob

[attachimg=1]
Title: Re: BAHNER
Post by: propless on November 19, 2008, 09:15:13 PM
    Cut the front plate today and set it back in :sly:

Now i got alot more to do :banghead: I guess i need to get a angle finder or whatever you use to install the engine.

  :banghead: :banghead: :banghead: :banghead:



 http://www.socaljetboats.com/index.php?topic=2830.msg74563#msg74563
Title: Re: BAHNER
Post by: jrork on November 30, 2008, 02:59:18 PM
Come on, if I get mine wet you can get this thing dialed in and wet......  Keep it up. You're doing great

Even though you're way ahead me on the page, post and view count :o
Title: Re: BAHNER
Post by: 2savage4you on November 30, 2008, 03:49:00 PM
Even though you're way ahead me on the page, post and view count :o



Well atleast im ahead of somebody on something ;D
Title: Re: BAHNER
Post by: 2savage4you on December 13, 2008, 10:16:05 AM
Met a guy over on PB, he was looking for the old owner of the Bahner. Old friends i guess.

He says he will try to find some of the pics when the Bahner was on the water with the race motor in it..  I also found out he ran a T/R and 660's  I wish i would have known that cause i would of loved to put it back that way. I even had a lead on that set up for what i payed for my set up now :banghead:

Im hoping i get those pics, would be kind of inspiring for me.....
Title: Re: BAHNER
Post by: 82daytona on December 14, 2008, 08:14:02 AM
you can always change your carbs  :D
Title: Re: BAHNER
Post by: KonaCole on January 19, 2009, 02:13:15 PM
Sounds like 2Sav can put this thread to rest and Start a new one O0
Title: Re: BAHNER
Post by: 2savage4you on January 19, 2009, 02:21:13 PM
Somebody delete this nightmare please :sly:
Title: Re: BAHNER
Post by: 2savage4you on January 19, 2009, 03:41:29 PM
well i stripped the ol girl for one last time, i didnt even shed a tear....

Moby should be here sat i think to pick her up and take her where men are men and sheep are scared :D

Funny thing is i dont even feel bad about it, im F-kin way jazzed about the new arrival.....

Bitchen boat but, the more i thought about only being able to take one person with me at a time just sucked.. So i guess 2sav is getting old  O0


Family boat, who would of thought
Title: Re: BAHNER
Post by: Nordie on January 19, 2009, 03:55:59 PM
there will be no drinking in celbration of the completion of the bahner...better luck next time guys
Title: Re: BAHNER
Post by: KonaCole on January 19, 2009, 04:37:57 PM
F'it, I'm drinkin to the arrival of a new project ;D
Title: Re: BAHNER
Post by: 2savage4you on January 23, 2009, 06:26:47 PM
Well say good bye to the Bahner boys, tomorrow is pick up day ( I hope ) have not heard from them for a week now ???

She was washed , waxed and bearings greased and ready for Washington...

this project thread should be deleted and forgotten about.....  After she leaves i will be DELETING all past project pics. I have 33 pages of project pics from all boats in my photobucket and its time for a fresh start....

So im cleaning house ;D
Title: Re: BAHNER
Post by: Brad @ SCJB on January 23, 2009, 06:41:27 PM
Well say good bye to the Bahner boys, tomorrow is pick up day ( I hope ) have not heard from them for a week now ???

She was washed , waxed and bearings greased and ready for Washington...

this project thread should be deleted and forgotten about.....  After she leaves i will be DELETING all past project pics. I have 33 pages of project pics from all boats in my photobucket and its time for a fresh start....

So im cleaning house ;D

what do i have to do to convince you to not do that? Theres a lot of good info in this thread....love it or hate it....im telling you the thruth.

All the pains and victories of this project will be helpful to someone down the road.
Title: Re: BAHNER
Post by: 76NORDIC on January 23, 2009, 06:46:15 PM
Yes I agree with you Brad, and hell he never even made it to 46 pages ;D ;D ;D
Title: Re: BAHNER
Post by: 2savage4you on January 23, 2009, 06:46:46 PM
what do i have to do to convince you to not do that? Theres a lot of good info in this thread....love it or hate it....im telling you the thruth.

All the pains and victories of this project will be helpful to someone down the road.

 Half my pics are already fugged up, damn photobucket I deleted some i wanted to keep accidentally and now all the threads are screwy with different pics. Im all for the info on this but i want to move on also. Delete the whole thing as if it were never there ;D
Title: Re: BAHNER
Post by: IRRebel on January 23, 2009, 06:47:29 PM
Twas already helpful to me in many regards, but I understand Steve if you wanna delete it. I agree with Brad it's a mistake, however.

Ray
Title: Re: BAHNER
Post by: FORKEDUP on January 23, 2009, 09:10:07 PM
leave it up bro, there is some good info here for the newbies, and some great pics of the very nice work that you did do to the bahner, trust me, you will want to look back at it one day and show someone and say, i did that work :)
Title: Re: BAHNER
Post by: jrork on January 28, 2009, 06:14:22 PM
what do i have to do to convince you to not do that? Theres a lot of good info in this thread....love it or hate it....im telling you the thruth.

All the pains and victories of this project will be helpful to someone down the road.

I've gotta agree with Brad.  Leave this cuz it's the real deal.  You've done a hell of a job and shit happens and we all have things that come up that make us change our thoughts.  This is a damn good thread.


PS...........if Moby is headed your way, hide the Crown...... otherwise, he may never leave..... ;D
Title: Re: BAHNER
Post by: 2savage4you on January 28, 2009, 06:23:15 PM
I've gotta agree with Brad.  Leave this cuz it's the real deal.  You've done a hell of a job and shit happens and we all have things that come up that make us change our thoughts.  This is a damn good thread.


PS...........if Moby is headed your way, hide the Crown...... otherwise, he may never leave..... ;D

He was here and left.. Picked it up saturday and headed back to vegas ;D

He said go to vegas on vacation and leave on probation, so either he got introuble or he should be getting close to home by now ;)
Title: Re: BAHNER
Post by: jrork on January 29, 2009, 06:42:40 PM

He said go to vegas on vacation and leave on probation,

That would be our boy Moby   ;D   I'm sure he's really happy.  Congrats on the sale