Cav plate length and set up ?

  • 12 Replies
  • 3263 Views

beerjet

  • Join Date: Nov 2006
  • Location: Rancho cucamonga
  • *
  • Team Member
  • Informative Member
  • *******
  • Posts: 9,102
  • Karma: +81/-0
    • View Profile
  • Liked:
  • Likes Given: 22
« on: May 20, 2007, 12:07:39 PM »
Is there an ideal length to have your cav plate sticking out . I thought I had dreamed up some pretty bitchin idea of how I wanted to put the plates on my boat and as it turns out the "splash" boat (or "crash" as it was refered to in Parker) had it done the same way .

The pillow blocks are also not long enough to clear the transome cover so should I just have longer ones made or toss the transome cover and put plates like a set back pump has . I'm getting pretty buzzed now so I gotta get my ass in the garage and get to work or else . I'll be sure to take some pictures.

-beerjet-
i dont but im all for stuffin shit in her ass to make her go away :-*



beerjet

  • Join Date: Nov 2006
  • Location: Rancho cucamonga
  • *
  • Team Member
  • Informative Member
  • *******
  • Posts: 9,102
  • Karma: +81/-0
    • View Profile
  • Liked:
  • Likes Given: 22
« Reply #1 on: May 24, 2007, 08:51:43 PM »
 >:(

-beerjet-
i dont but im all for stuffin shit in her ass to make her go away :-*

hotrod56cars

  • Join Date: Nov 2006
  • Location: El Cajon, CA.
  • *
  • Banned
  • Newbie
  • *
  • Posts: 21
  • Karma: +1/-8
    • View Profile
  • Liked:
  • Likes Given: 0
« Reply #2 on: May 24, 2007, 11:50:22 PM »
I think cav plates are for when you have braces and you get a cavity. It's been a long long time since I had braces but that's the way I remember it.   ;)

If you block up the pillows you're definately going to get a headache. The pillows just don't have enough cushion in them to prevent a bump on your head.   ;)


I think you didn't get any replies because no one has a clue (like me).   ;)
Quote
NO REGRET$ ... Arguing on the internet is like competing in the Special Olympics / no matter how good you do you're still retarded!!!!!

                                                          1978  19' Mach 1 Tunnel jet

beerjet

  • Join Date: Nov 2006
  • Location: Rancho cucamonga
  • *
  • Team Member
  • Informative Member
  • *******
  • Posts: 9,102
  • Karma: +81/-0
    • View Profile
  • Liked:
  • Likes Given: 22
« Reply #3 on: May 25, 2007, 06:55:49 PM »
I have a clue . I just dont have all the hardware and a properly set up boat for all this fandangled hardware.

-beerjet-
i dont but im all for stuffin shit in her ass to make her go away :-*

Ralph Brunt

  • Join Date: Nov 2006
  • Location: long beach, ca
  • *
  • Team Member
  • Informative Member
  • *******
  • Posts: 5,337
  • Karma: +51/-0
  • river time
    • View Profile
    • http://www.socaljetboats.com/cpg/albums/userpics/10041/normal_SCSCseasonopener3_4_07-4_184_edited.jpg
  • Liked:
  • Likes Given: 3
« Reply #4 on: May 26, 2007, 06:29:35 PM »
theres a thread about this on the other site :-\

CHEAP, FAST, RELIABLE...PICK 2 CANT HAVE ALL 3
Quote
They are all fukin tasty. My long time favorite, "Dirty Dicks -beerjet-
Glasscutter, Skip, OC2  Nordie and many more nail me good every time, relentlessly, I love those guys!

beerjet

  • Join Date: Nov 2006
  • Location: Rancho cucamonga
  • *
  • Team Member
  • Informative Member
  • *******
  • Posts: 9,102
  • Karma: +81/-0
    • View Profile
  • Liked:
  • Likes Given: 22
« Reply #5 on: May 26, 2007, 08:33:37 PM »
theres a thread about this on the other site :-\
I read it .  :-\ " Hey you should talk to that guy !" " or" Hey you should talk to this guy !" I wanna see some detailed pictures damnit .

-beerjet-
i dont but im all for stuffin shit in her ass to make her go away :-*

beerjet

  • Join Date: Nov 2006
  • Location: Rancho cucamonga
  • *
  • Team Member
  • Informative Member
  • *******
  • Posts: 9,102
  • Karma: +81/-0
    • View Profile
  • Liked:
  • Likes Given: 22
« Reply #6 on: November 06, 2007, 06:30:54 PM »
Still sitting here with my thumb in my ass . I'm gonna go out on a limb and say that after all this shit is installed , I'll be able to replace anything that needs to be replaced . Mainly it's location and wether or not this old shit will hold up .

-beerjet-
i dont but im all for stuffin shit in her ass to make her go away :-*

CHROMEY

  • Join Date: Jun 2007
  • Location: NOW SHOWING IN LAS VEGAS
  • *
  • Team Member
  • Macho Member
  • ******
  • Posts: 2,635
  • Karma: +33/-0
    • View Profile
    • Chromeys Concepts Photography
  • Liked:
  • Likes Given: 36
« Reply #7 on: November 07, 2007, 12:07:58 PM »
Quote
Still sitting here with my thumb in my ass

well its hard to get anything done like that.....especially when you have a beer in your other hand!!
  • Boat #1: 78 Omega California openbow miniday 22ft.-broken
  • Boat #2: 2004 Chevy Avalanche Crewcab
**livin la vida loca in las vegas......
**now open chromeys concepts photography, ALL PHOTO JOBS OPEN-WILL TRAVEL**

GlassCutter

  • Join Date: Mar 2007
  • Location: Redlands, CA
  • *
  • Informative Member
  • *******
  • Posts: 4,360
  • Karma: +31/-0
    • View Profile
  • Liked:
  • Likes Given: 81
« Reply #8 on: November 07, 2007, 12:50:40 PM »
Peeps over here just gotta know how long the lady can keep that phone in her a$$
I'm just askin'  . . .
  • Boat #1: 1973  Wriedt Montara 23
  • Boat #2: 1978 Spectra 20 460/Berkley
Also, I will kiss bare male ass in the middle of the Vegas Strip  . . .  I will post pics if I need to.  --  IRRebel 2013

"Go ahead Rivertard does it.  Take a video though."

"If you did it in a dodge it would have shifted perfectly ran a thousand miles per hour and got optimum fuel mileage!"  Nordie  2012

beerjet

  • Join Date: Nov 2006
  • Location: Rancho cucamonga
  • *
  • Team Member
  • Informative Member
  • *******
  • Posts: 9,102
  • Karma: +81/-0
    • View Profile
  • Liked:
  • Likes Given: 22
« Reply #9 on: November 07, 2007, 02:59:33 PM »
Peeps over here just gotta know how long the lady can keep that phone in her a$$
I'm just askin'  . . .
She a fukin pro ! Just dont make any short tem bets .
well its hard to get anything done like that.....especially when you have a beer in your other hand!!
I know but the rights always busy !  :o

-beerjet-
i dont but im all for stuffin shit in her ass to make her go away :-*

Josh@JBP

  • Join Date: Jun 2007
  • Location: Atascadero CA
  • *
  • Sr. Member
  • ****
  • Posts: 320
  • Karma: +6/-0
    • View Profile
    • Jet Boat Performance
  • Liked:
  • Likes Given: 0
« Reply #10 on: November 08, 2007, 11:33:41 AM »
All this fluff and no real input ::)  I'd say about 7"-8"  x 20"-24". We used to have a pretty bitchen set up layin around that used 3 rods one spaced out from the transom adapter to transfer the "adjustment" (for lack of a better word), It was complex but always looked like it would have worked well.

beerjet

  • Join Date: Nov 2006
  • Location: Rancho cucamonga
  • *
  • Team Member
  • Informative Member
  • *******
  • Posts: 9,102
  • Karma: +81/-0
    • View Profile
  • Liked:
  • Likes Given: 22
« Reply #11 on: November 08, 2007, 03:02:57 PM »
All this fluff and no real input ::)  I'd say about 7"-8"  x 20"-24". We used to have a pretty bitchen set up layin around that used 3 rods one spaced out from the transom adapter to transfer the "adjustment" (for lack of a better word), It was complex but always looked like it would have worked well.
Thats about what I came up with Josh (demensions wise) my only beef at this point is if the cav plates and rods and arms are even going to be strong enough . I figured worst case senario , if I installed all this hardware I could always upgrade later and all my dimensions would be there . The only thing that would change would be the thickness of the plates themselves of course if at all .

-beerjet-
i dont but im all for stuffin shit in her ass to make her go away :-*

CHROMEY

  • Join Date: Jun 2007
  • Location: NOW SHOWING IN LAS VEGAS
  • *
  • Team Member
  • Macho Member
  • ******
  • Posts: 2,635
  • Karma: +33/-0
    • View Profile
    • Chromeys Concepts Photography
  • Liked:
  • Likes Given: 36
« Reply #12 on: November 08, 2007, 05:28:56 PM »
that josh sure knows his shit!!!
  • Boat #1: 78 Omega California openbow miniday 22ft.-broken
  • Boat #2: 2004 Chevy Avalanche Crewcab
**livin la vida loca in las vegas......
**now open chromeys concepts photography, ALL PHOTO JOBS OPEN-WILL TRAVEL**

 


Website Security Test
Powered by EzPortal

Website Security Test