SoCal Jet Boats

Discussion => Boat Racing => Topic started by: Wild Bill on February 29, 2008, 12:48:09 PM

Title: Diverter Stop
Post by: Wild Bill on February 29, 2008, 12:48:09 PM

Hi Guys,

Would someone please post a picture of a diverter stop? Any fabrication/installation tips?
How about tips for setting it accruately?

Thx!

Title: Re: Diverter Stop
Post by: Wild Bill on March 21, 2008, 02:41:29 PM

Hey Brad,

You mentioned in an e-mail awhile back that you had some diverter stop pics. Would you mind posting them and a little info?


Thx,

Bill

Title: Re: Diverter Stop
Post by: pw_Tony on March 21, 2008, 03:01:01 PM

I'll see if I can get a pick for yah tomorrow, it's basically just a l shaped bracket that runs off the forward/reverse mount towards the diverter arm

Title: Re: Diverter Stop
Post by: Wild Bill on March 21, 2008, 03:06:49 PM

Thanks Tony! I'm trying to get everything figured out for Burley, and us first timers up here in Idaho don't have much in the way of local resources. I appreciate the help!

Title: Re: Diverter Stop
Post by: Brad @ SCJB on March 21, 2008, 03:24:06 PM

ill run out and snap a pic now...brb.

Title: Re: Diverter Stop
Post by: Brad @ SCJB on March 21, 2008, 03:33:15 PM

Hope this helps...

[attachimg=1]

[attachimg=2]

Title: Re: Diverter Stop
Post by: Wild Bill on March 21, 2008, 04:16:56 PM

Thanks Brad, that helps a lot. Looks so simple, I was just having a hard time visualizing
it. So, do you just do your best to guess a 4 feet and tech lets you know if they think
you're too far off?

Title: Re: Diverter Stop
Post by: Ralph Brunt on March 21, 2008, 05:05:29 PM

Quote from: Wild Bill on March 21, 2008, 04:16:56 PM

Thanks Brad, that helps a lot. Looks so simple, I was just having a hard time visualizing
it. So, do you just do your best to guess a 4 feet and tech lets you know if they think
you're too far off?

just look behind you on a test run, you should be able to see over the top of your tail, if not your probably to high

Title: Re: Diverter Stop
Post by: Wild Bill on March 21, 2008, 05:21:07 PM

Cool, thanks Ralph.