SoCal Jet Boats
Discussion => Boat Showcase => Topic started by: HDriderTH on May 19, 2007, 09:18:35 PM
-
...finaly
-
Right on!!!! I hope you didn't spill anything on my boats new polish job getting it running!
Congratulations!
-
pics inna sec....
Let's see if these get on here...
-
HEY ! HOW ABOUT SOME FOCKIN VIDEO ! >:D
-beerjet-
-
is that a blower, how much horsepower does it have.
-
nice looking boat.
-
Nice work! I'll reward you well for fixing my boat but you missed a spot (polishing) under my engine's #3 cylinder. ;D
Nice boat!!!!!!!!!!
-
HEY ! HOW ABOUT SOME FOCKIN VIDEO ! >:D
-beerjet-
Nobody here to hold the camara when I fired it. May get it wet tomorrow, will get some video. Omar keep me posted on the discussion as to what this hull is.
-
congrats terry......thing looks sweet now
heres some pictures I snapped of this boat the night before terry picked it up....
you did A LOT of polishing compaired to these pictures. Cant wait to see this boat in person again and running!
-
Man that boat is awesome , can't wait till we do a Meade trip so I can take a ride in it!!!!
-
Thanks guys, yup days and days of polishing, adjusting, setting and just plain scrubbing. Was ready to fire Friday night..no fire. Surfed all day for a place to get a mag serviced, said point gap .016 on the label so i cleaned and set the points and Boooya!!!! Mags run a .018 plug gap for future reference. Gotta bore a hole in the valve cover for a breather, i got one w/ no hole so i can have them both at the same end, check the oil in the blower and v-drive, put in the seats and i can go get it wet. I'm three weeks out with my upholstry guy. Gonna get some drag boat seats and have the stock Sanger stuff done too. We're removing the brown paint and redoing the graphics......looking for ideas on graphics SEND SOME PICS!!
-
Killer boat ... Didn't see this thread before!
-
Thanks Lock. Omar, i gotta little video (warm up in the water) today, dunno how to post it. Oil pressure gauge pegged, 10-12 bls of boost...life is good.
-
Took the bad boy out yesterday, Mead. Rough as hell, ran outta gas, got towed in. Going to hook up with Jim below Laughlin to day. FR haules ASS!!! more like driving a car, more intimate with engine it seems. Exaust noise actualy goes away at cruiseing speed, can still hear blower and v-drive tho
-
sweet.....let us know how it goes on the river!
I cant wait for the Avi trip to see this thing in action
-
sweet.....let us know how it goes on the river!
I cant wait for the Avi trip to see this thing in action
It's a monster dude, thinking of calling it "ANIMAL" put the tasmainian devil on it
-
.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.kulturtaikonauten.org%2Fblog%2Fbabbelfisch%2Farchives%2FMuppets-Mega-Animal.jpg&hash=15953490609cf1901a704626f41da86ab95d336a)
-
.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.kulturtaikonauten.org%2Fblog%2Fbabbelfisch%2Farchives%2FMuppets-Mega-Animal.jpg&hash=15953490609cf1901a704626f41da86ab95d336a)
Is that an old pic of terry ???
-beerjet-
-
This kid actualy asked us if we were pirates today. I dunno, maybe it was the doorag and ponytail thing... Jim and I floated from Laughlin to Needles today and hauled ass back up again just before dark. nice day just too many jetskis. Boat ran good all day. Went to Mead yesterday, boat ran good till it ran outta gas, switched to the other tank and wouldnt run, got towed in. Too many jetskis. Got this weird ass tank switch, arrow doesnt point to line your using....so anyway IT"S ALIVE!!!!
-
ahhh nothing better than a good day boating with a good looking boat
glad you had fun
-
Thanks Ralph, yea we had an audience too. People still go nuts over a big engine on the ramp. Heres three pics of the Avi.....too many jetskis! Dont know which is worse jetskis or wakeboard boats.
-
Those are some awsome pictures . And a sick ass ride terry . Definatly gonna have to try that .
-beerjet-
-
A little on board video:
http://www.youtube.com/watch?v=RcTRZOR4dWY
-
Freakin' awesome HD. That's got to be a radical ride in person. Killer looking boat too! How's Jim doing?
I got your message while I was driving home late this afternoon. Sorry I haven't called you back yet...
-
the good news is, bad gasket no cracks. The bad news is the blower is trashed. Need to get a blower built in ten days!! Anybody know someone? I'll be calling The Blower Shop, BDS and all of them but if anybody knows ANYTHING , let me know ASAP. The fucr ran good, jus low boost and water in #1 everytime I pulled the plug. Props to blunun for comming up w/ the water tee I need for my headers...I'll getcha a brownie point later. Looking for a control valve. Pics to follow..
-
hd, bad ass piece of machine, i watched 3x, then showed the wife now i got the green light to get blown. that is the sh&t. looked packed on beach but in video nobody around did they get scared by the mass power and bailed out of way to make your run. that is damn good video for rookie filming.
-
then showed the wife now i got the green light to get blown.
You didnt specify that you were talking about your boat...
-
whats wrong with the blower ??? :( >:(
-
whats wrong with the blower ??? :( >:(
Something about scracthes on the rotors from hitting each other...
-
what kind of blower / size is it my friend may have a few for sale.... get back to me!!!
<-----just updated----->
maybe not the right area for this but!!!
gmc blower / 671 / non polished / w-new rear cover, bearings,seals / aftermarket front midplate / rebuilt by KUHL / tefloned rotors / no scratches on rotors or case / $ 1000.00 / not complete needs front drive
-
what kind of blower / size is it...
HD has/needs a 6/71
-
You didnt specify that you were talking about your boat...
Whos talkin about the boat!?!?
-
Whos talkin about the boat!?!?
NICE! LMFAO ;D
-
Thanks for the compliments guys, thanks for lookin out CHROMEY. Just found out about it yesterday, got like nine days to replace or rebuild this thing or AVI is out the window. Heres a few pics so you all know what i'm talking about.
Pics tonight, gotta go box blower....
-
heres why and what happened...the washer broke into four pieces, let the thing go out of time and boda bing yer sh*t iz focked up. :o
-
I'm sorry I couldn't help you out more today, where are you having it repaired at?
-
I'm sorry I couldn't help you out more today, where are you having it repaired at?
Jim Brocks....see "HELP"
-
I dropped thet sucker off at Fed ex last night at 6:00 and they tried to deliver it to Brock this morning before he opened. $22.32 FedEx Ground...58lbs.
-
I dropped thet sucker off at Fed ex last night at 6:00 and they tried to deliver it to Brock this morning before he opened. $22.32 FedEx Ground...58lbs.
Flock yeah! Way to get er done! :o
-
slapped the heads back on today, all painted up n cherry. Polished out my pulleys and bracket yesterday. Cleaning up the wiring, waiting on a water tee from blunun. Should get er rapped up 'bout the time that new blower gets here.
-
slapped the heads back on today, all painted up n cherry. Polished out my pulleys and bracket yesterday. Cleaning up the wiring, waiting on a water tee from blunun. Should get er rapped up 'bout the time that new blower gets here.
Right on. This (AVI) is going to be a blast! ;D
-
ill bring my spare blower just in case.... ;D
-
so u wanna buy my blower or what.....just checking how your rebuild is going......
-
Got the blower back on, thanks Jim and Ralph. Tried my scoop and carbs off my car, wadda you guys think?
-
Got the blower back on, thanks Jim and Ralph. Tried my scoop and carbs off my car, wadda you guys think?
Looks great! :o Glad to see you made it home, I was a little bit worried about you making it home OK. ;) :)
-
Looks bad ass terry ! Hope to see it soon .
-beerjet-
-
Went to Mead today, try out the new blower n stuff. We shot video of it comeing outta the water but it came out shitty.
http://youtube.com/watch?v=-fSNGFCscy4
-
Glad to see your back up and running again ;D
Maybe by next summer jim and i will have my boat ready and we can all get together.
2sav
-
few pics of the lake.....
-
Nice Pics! Water looks clean there.
-
hd, is that hemmingway harbor that is still like glass and is the water still at 82, i think next weekend i am going taking the 24eliminator out 8)
-
hd, is that hemmingway harbor that is still like glass and is the water still at 82, i think next weekend i am going taking the 24eliminator out 8)
Yup, thats one of those islands right off Hemminway. You se me floating in the water in one of the pics and of course the video. We took some video of me doing some passes but came out shitty, glare
-
BADA-- Boat!!!
Never say die!!!