Null


farmergord

  • Karma: +6/-0
Re: my new project
« Reply #50 on: February 24, 2010, 02:20:46 pm »
heres a  couple with 3 coats of clear. now a few days away from this project then back sanding :banghead:                              



 
« Last Edit: February 25, 2010, 04:53:59 pm by farmergord »
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

challenger

  • Karma: +0/-0
Re: my new project
« Reply #51 on: February 24, 2010, 04:58:52 pm »
heres a  couple with 3 coats of clear. now a few days away from this project then back to sanding :banghead:
that looks good  farmergord dam i wish i had room like that  :thumbup:
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #52 on: February 25, 2010, 04:55:33 pm »
Heres a few out in the sun today  cant wait to finish this and get it wet :thumbup:
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

76 Bonneville

  • Karma: +25/-0
Re: my new project
« Reply #53 on: February 25, 2010, 05:01:07 pm »
Gordy that looks great.
What did it cost for the materials?
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #54 on: February 25, 2010, 05:09:21 pm »
3qts primer sealer,4qts white,2qts blue 3 gal clear roughly $600.00 including reducers and hardners. You could get by with 2 primer and 2 white for bottom and 2 color for top and 1 gal of clear. I ordered more to put white under my mettalic and more clear to put on top of the graphics after thier painted on plan to do 9 coats of clear 3 at a time


http://www.tcpglobal.com/
« Last Edit: February 25, 2010, 09:45:51 pm by farmergord »
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #55 on: February 25, 2010, 05:13:16 pm »
Jim Brock heres the picture  of the bellhousing you asked for
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

honda1

  • Karma: +0/-0
Re: my new project
« Reply #56 on: February 25, 2010, 08:37:30 pm »
Gordy thats for the pm your boat is looking sweet your work is awsome mine is almost to ppg primer an then it goes to buddy who bought out a ppg warehouse in havasu with a booth he is shooting it for me for the cost of the clear  and sorry been staying out of the posting dont want to piss anybody  off But I will keep checking your posts bud great job on boat ;)
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

CenCalCruiser

  • Karma: +0/-0
Re: my new project
« Reply #57 on: February 25, 2010, 08:49:47 pm »
Boat is looking great! 6 coats of clear....you're the man.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #58 on: February 26, 2010, 08:06:49 am »
actually going to end up with 9 coats probably overkill :screwy:
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

500hptaylor

  • Karma: +0/-0
Re: my new project
« Reply #59 on: February 26, 2010, 02:17:20 pm »
Looks great Farmer, really makes me anxious to start mine. I dig that blue :thumbup:
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Willow Wog

  • Karma: +6/-0
Re: my new project
« Reply #60 on: February 27, 2010, 06:21:31 pm »
What ar your plans for graffics? or are you going to make us wait until it's finished? 
  • Boat #1: 1977 Hawaiian model? southwind splash
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Coors light dreaming on a Keystone budget...

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #61 on: February 27, 2010, 10:17:59 pm »
Ive been wondering when someone was going to ask. My wife is an artist and at first I wanted a big titted naked woman airbrush mural on the bow but she didnt think that was as good an idea as I did. ;D So I have always wanted a hotrod with old school flames so that is what she is going to do on the bow . Then I bought her some pinstriping brushes and shes been messing around with them. So there will be pinstiping as well not sure what or where yet.
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

Willow Wog

  • Karma: +6/-0
Re: my new project
« Reply #62 on: March 01, 2010, 08:39:50 pm »
right on I can't wait to see it. :thumbup:
  • Boat #1: 1977 Hawaiian model? southwind splash
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Coors light dreaming on a Keystone budget...

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #63 on: April 18, 2010, 03:32:11 pm »
well after 6 weeks of not touching the boat we finally found time today to get back to it. time to practise doing flames on an old hood I sprayed blue when I did the boat. My artist wife layed them out her first ever attempt, then we sprayed them yellow then she hilighted with orange but she left her airbrush at school so had to use my touchup gun . Cant get as fine a spray with it so will refine technique on the boat. she wasnt happy with the end so she tried to cover it up when i snapped the picture. Also stripped the old seat frames and started to build new ones as the old are to rotten .Tomorrow the block goes to the machine shop so that process can begin. Finally some new progress.
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

honda1

  • Karma: +0/-0
Re: my new project
« Reply #64 on: April 18, 2010, 06:01:50 pm »
Gordy its looking cool tell wify that just because its not perfect it still looks cool . It looks like she is having fun and thats what boating is about ,Even if your in the build stage  :thumbup: :thumbup: ;)you guys keep it up awsome
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

blow it up

  • Karma: +0/-0
Re: my new project
« Reply #65 on: April 18, 2010, 08:02:39 pm »
Nice Gord! Lookin sweet! And being a painter you can never have to much clear. 9 coats is going to be deep and rich lookin. Nice build :thumbup:
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #66 on: April 25, 2010, 06:59:00 pm »
Well Ive asked everyone else I know so I might as well add your opinions to the mix What cam would you guys reccommend for my stock 460 ,stock cast heads , stock bore ,750 cfm Holley carb, Performer intake. Also looking for the best gasket set .I hate oil leaks and want a set that will cause the least trouble, any and all suggestions appreciated
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #67 on: April 26, 2010, 01:14:58 pm »
Well Ive asked everyone else I know so I might as well add your opinions to the mix What cam would you guys reccommend for my stock 460 ,stock cast heads , stock bore ,750 cfm Holley carb, Performer intake. Also looking for the best gasket set .I hate oil leaks and want a set that will cause the least trouble, any and all suggestions appreciated

what nobody has any opinions??????
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

Luckie Stiff

  • Karma: +29/-0
Re: my new project
« Reply #68 on: April 26, 2010, 01:29:45 pm »
Well Ive asked everyone else I know so I might as well add your opinions to the mix What cam would you guys reccommend for my stock 460 ,stock cast heads , stock bore ,750 cfm Holley carb, Performer intake. Also looking for the best gasket set .I hate oil leaks and want a set that will cause the least trouble, any and all suggestions appreciated

Cam- Comp Cams XM288H cam complete kit= http://www.summitracing.com/parts/CCA-K34-245-5/

For gaskets, it's hard to beat Fel Pro for the price, the only thing I'd suggest is using the rubber valve cover and oil pan gaskets with the crush proof sleeves:
Valve Cover gaskets: http://www.summitracing.com/parts/FPP-1643/
Oil Pan gasket: http://www.summitracing.com/parts/FMS-M-6710-A460/

  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Don't you realize that there are already enough people in the world to hate without you putting so much effort into giving me another?"

just squirtin

  • Karma: +1/-0
Re: my new project
« Reply #69 on: April 26, 2010, 01:42:15 pm »
im running a 460ci=500hp-alun heads-comp cam #34-336-4 right now-torky son of a gun=75+

did have a ford racing cam with stock heads-fms-m-6582-c460 i think that was the #-i would double check that # to be sure-
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

just squirtin

  • Karma: +1/-0
Re: my new project
« Reply #70 on: April 26, 2010, 01:46:09 pm »
with that ford cam it ran pretty darn good
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #71 on: April 30, 2010, 07:08:23 pm »
took the covers off the seat frames today to get ready for upholstry and got a nasty surprise. All rot .fortunatly it s not a huge problem to whip up a new set. Started by making a bending jig then bent 6 layers of 4 mil waterproof marine ply,then cut out the other parts out of half inch, should be done by the weekend but this damn farming is starting to cut into my boat working time   :thumbup:
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

honda1

  • Karma: +0/-0
Re: my new project
« Reply #72 on: April 30, 2010, 07:33:49 pm »
Dam you go Gordy you da Man  awsome work    as for farming all the girls next door Ill feed the neigber chicks  ;D ;D ;D thats what buds are for 8)
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

farmergord

  • Karma: +6/-0
Re: my new project
« Reply #73 on: May 13, 2010, 04:16:03 pm »
a few pics of my finished seat frames. trying to make my may 30th appointment for upholstry  but its not looking good. farming way to busy right now damn Id rather work on the boat but oh well must pay the bills.Machine shop says block and heads ready friday hopefully some time to work on it this weeknd
  • Boat #1: 1976 Pioneer 19foot
  • Boat #2: 2020 Kingfisher 2025
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
Im not a nag Im a motivational speaker

honda1

  • Karma: +0/-0
Re: my new project
« Reply #74 on: May 13, 2010, 05:11:23 pm »
Dam Gordy nice work looks awsome :thumbup:
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

 


Null

SMFPacks CMS 1.0.3 © 2023