SoCal Jet Boats

Classifieds => Boats For Sale => Topic started by: nathan on March 21, 2010, 09:50:35 PM

Title: 1977 Southwind 18' - $4500
Post by: nathan on March 21, 2010, 09:50:35 PM

460BBF, Berk 12JC, A Impeller

Time to landscape the back yard, so im throwing it up. Had it for two years, never been wet since then, always in the garage, always covered


*Fresh motor, new crank, stock size, polished, oversized main and rod bearings for better oiling
*All new steel braided lines
*Carbs professionally milled, rebuilt by Bob Reams at B&R Automotive
*Powdercoated Weiand tunnel ram, butterfly scoop
*New wiring, motor side, and boat/guage side
*New guages
*New alternator, single wire, internally regulated
*New starter
*Floor replaced, re-fiberglassed - the wood was fine, but the glass was showing delamination
*Floor coated with spray-in bedliner
*Custom tig welded fuel crossover for carbs, water crossover for engine
*New bilge pump

Original gel.. in pretty good shpe. still shines up real nice

Pics:

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.dynamicit-az.com%2FBoat%2FDSC02767.JPG&hash=15daedf789e97adfd85ec16eb62c330aa186f5ed)

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.dynamicit-az.com%2FBoat%2FDSC02772.JPG&hash=6ea15e844cb941116f3f6dc10b696f9cb29711f8)

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.dynamicit-az.com%2FBoat%2FDSC02778.JPG&hash=2c1b81c9adb01593bc1d687011aba8a9cb8062ad)

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.dynamicit-az.com%2FBoat%2FDSC02781.JPG&hash=ec604f042c9aa2757ac63ca5c0014119f92b9372)

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.dynamicit-az.com%2FBoat%2FDSC02783.JPG&hash=3d415ab8c9787fa8f5d40e72092c879d443deb63)

Title: Re: 1977 Southwind 18' - $4500
Post by: FordLover on March 22, 2010, 08:04:46 AM

This looks like the boat I was bidding on Ebay a couple years ago.  Good looking boat. :thumbup:

Title: Re: 1977 Southwind 18' - $4500
Post by: Ralph Brunt on March 22, 2010, 09:06:52 AM

nice boat :thumbup:
however, could you explain the oversized bearing thing to me ???

Title: Re: 1977 Southwind 18' - $4500
Post by: nathan on March 22, 2010, 12:04:13 PM

wrong choice of words. went a little looser tolerance wise on the crank/rods.

Title: Re: 1977 Southwind 18' - $4500
Post by: Ralph Brunt on March 22, 2010, 12:12:05 PM

Quote from: nathan on March 22, 2010, 12:04:13 PM

wrong choice of words. went a little looser tolerance wise on the crank/rods.

ok sounds good :thumbup:

Title: Re: 1977 Southwind 18' - $4500
Post by: bamboozler on March 22, 2010, 10:03:20 PM

Is there carpet in it or just the spay in liner.
Great looking boat. :thumbup:

Title: Re: 1977 Southwind 18' - $4500
Post by: nathan on March 23, 2010, 06:30:41 AM

Quote from: bamboozler on March 22, 2010, 10:03:20 PM

Is there carpet in it or just the spay in liner.
Great looking boat. :thumbup:

just spray in liner, it's got a real nice texture - and will definately keep the floor solid.
thanks for the compliments.. been my stress relief for the last two years, but i figure.. my back yard cant remain dirt for much longer :)

Title: Re: 1977 Southwind 18' - $4500
Post by: bamboozler on March 23, 2010, 07:57:48 AM

Do you have some pics of the pump and the bottom of the boat you could post.
Thanks

Title: Re: 1977 Southwind 18' - $4500
Post by: cakemoto on March 23, 2010, 08:27:25 AM

good lookin boat....good luck with the sale!

Title: Re: 1977 Southwind 18' - $4500
Post by: nathan on March 23, 2010, 10:01:02 PM

Quote from: bamboozler on March 23, 2010, 07:57:48 AM

Do you have some pics of the pump and the bottom of the boat you could post.
Thanks

http://www.dynamicit-az.com/Boat

ton more pictures. I don't have any of the bottom- but can get them for you tomorrow!

If those dont work, let me know what your looking for pump-wise and ill get them up.

Title: Re: 1977 Southwind 18' - $4500
Post by: Bigbossman0071 on February 10, 2011, 08:18:56 AM

Is boat still for sale?
Thanks
Don

Title: Re: 1977 Southwind 18' - $4500
Post by: Donjuan on April 25, 2011, 10:02:41 PM

Still got it