SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: scotticq on September 11, 2016, 01:42:43 PM

Title: 10 quart pan drain plug
Post by: scotticq on September 11, 2016, 01:42:43 PM

So I just got a 10 quart pan for my motor and the drain plug is on the opposite side it's on the left side now instead of the right, away from the water drain out of the jet so how do you go about draining the oil? Do you run a hose from the pan and through the transom? Or another hole  on the left of the jet housing?  any advice would be great

Title: Re: 10 quart pan drain plug
Post by: GT Jets on September 11, 2016, 01:54:32 PM

Quote from: scotticq on September 11, 2016, 01:42:43 PM

So I just got a 10 quart pan for my motor and the drain plug is on the opposite side it's on the left side now instead of the right, away from the water drain out of the jet so how do you go about draining the oil? Do you run a hose from the pan and through the transom? Or another hole  on the left of the jet housing?  any advice would be great

They should all have a drain kit installed. Oil never hits my bilges.

GT

Title: Re: 10 quart pan drain plug
Post by: scotticq on September 11, 2016, 02:05:40 PM

What kind of kit

Title: Re: 10 quart pan drain plug
Post by: GT Jets on September 11, 2016, 02:37:38 PM

I use the Jabsco kit.


https://www.amazon.com/Jabsco-Permanent-Drain-Hose-Fitting/dp/B00144EGNS

Also,  pick up some cheap wire shower curtain rings to hold the end of the hose up out of the bilge.

Title: Re: 10 quart pan drain plug
Post by: shadow3621 on September 11, 2016, 03:35:37 PM

I have the same problem. Thanks GT.


Sent from my iPad using SoCal Jet Boats