SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Lwoody77 on June 19, 2016, 10:13:14 PM

Title: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...
Post by: Lwoody77 on June 19, 2016, 10:13:14 PM
[/URL]
Whrs a good place to find parts looking for an intake manifold a lil rise. I kno shes a lil crusty takn my time fixing her up. Ford carburator

Sent from my iPhone using SoCal Jet Boats
Title: Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...
Post by: Flusher on June 19, 2016, 11:24:04 PM
That's a B engine or possibly an RB.  The displacement should be stamped on a pad near the distributor.  B engine displacements are 350, 361, 383 (B) and 400 with a deck height of 9.980".  RB engine displacements are 383 (RB), 413, 426 (Wedge), and 440 with a deck height of 10.725".

You really need to be sure which engine block and heads you have before selecting an intake.

By the way, kudos for attempting Mopar power.
Title: Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...
Post by: GlassCutter on June 20, 2016, 09:12:02 AM
Doesn't look like an RB from the pic but hard to tell.  The valve covers look to be very close to the intake flange, where the RB's have a bit of space due to longer stroke.  Easiest motor in the world to stroke on the cheap.   Tons of possibilities here along with good info  http://www.440source.com/ (http://www.440source.com/)  I have a few contacts if you need help with a build, but even stock parts can be used to slap a 440 crank in a 383 block and end up with bigger, stronger and faster.
Title: Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...
Post by: GT Jets on June 20, 2016, 09:28:32 AM
Hate to tell you guys this, but I think that's a 360 American Motors.

Wagoneer motor.

The distributor location gives it away.

GT
Title: Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...
Post by: Bigblockchevy1691 on June 20, 2016, 09:41:41 AM

Hate to tell you guys this, but I think that's a 360 American Motors.

Wagoneer motor.

The distributor location gives it away.

GT
I was going to say the same thing.  It's a AMC


Sent from my iPhone using SoCal Jet Boats
Title: Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...
Post by: Flusher on June 20, 2016, 10:24:53 AM
Hate to tell you guys this, but I think that's a 360 American Motors.

Wagoneer motor.

The distributor location gives it away.

GT


I was going to say the same thing.  It's a AMC


Sent from my iPhone using SoCal Jet Boats

I concur.  I had to walk all the way out to my shop and look at my 440.  The B/RB distributor angles up and to the right.  The picture clearly shows up and to the left.  Definitely isn't a Mopar LA 360.  All Most Chrysler.
Title: Re: 360 chryler engine whrs a good place to find parts? I kno its a small engine ...
Post by: GlassCutter on June 20, 2016, 01:45:48 PM
Fok I'm getting old.   I put my 70 Super Bee into storage nearly 30 years ago now.   Always told myself that when my Dad passed away I would use some of his estate to build me a lill something to whet a middle age crisis.  But times change and I built a monster moto machine instead.  She went 1-1 at the World Championships in April right out of the box.
Sorry for the thread jack.   :beer:

SMFPacks CMS 1.0.3 © 2026