SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: el mojado on June 09, 2014, 12:19:47 AM
-
I have a Glenwood 4 point mount set up that I want to use. The boat previously had a 3 point set up. My issue is that I cant install the lower bolts for the feet into the stringer because of my floor. Will I be okay with just one bolt going through the stringers at each corner?
Sent from my SCH-I535 using SoCalJetBoats mobile app
-
no. the weight and tq of the motor will make the mount eventually dig into your stringer and elongate your bolt hole. 2 bolts and use a backing plate or a stringer washer. cut a little notch in your floor so u can fit a wrench to hold a nut.
-
The floor is way up that I can only fit the top bolts.
Sent from my SCH-I535 using SoCalJetBoats mobile app