SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: wanabe on January 14, 2008, 03:43:28 PM
-
I meant to post this before the bidding ended in case someone here was interested but I forgot about them.
Anyone seen these square manifolds before? I think they would look pretty good.
[attachimg=1]
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320204579721&ssPageName=ADME:B:WNA:MOTORS:1123 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320204579721&ssPageName=ADME:B:WNA:MOTORS:1123)
-
I've seen them on a boat someone has on this site. I think they are god ugly, but that's just my opinion
-
I wasn't sure how they'd look installed; I thought it may look pretty good
-
Those are the standard Olds 455 Berkeley Packajet manifolds.
They're plumbed different than a standard log manifold. Instead of the logs preheating the water by running it to the logs first, the water goes directly into the motor, then the dumps feed the water inlets on the manifold. It then dumps through the risers.
-
Those set-ups also used a clunky iron 2 piece thermo housings and car type water pump for a recirculating system. The logs are jacketed to the riser so you need both pieces. Heres a pic of the housing and risers. Also the manifolds only use 4 bolts each and you have to access them through holes on the exterior that are pluged with pipe plugs.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fjosh%2FDSCF0159.jpg&hash=def79f041554798de10b3ab340c08cfa41866bbe) (https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fjosh%2FDSCF0157.jpg&hash=0ebec1861beff0f5d6f8b0eb58d0bbd7d724a485)
-
OK; bottom line on this is to stay away from this type of exh mani; correct?
-
OK; bottom line on this is to stay away from this type of exh mani; correct?
I would. Another thing about them is they are known for cracking along the bottom of the siamese ports on the center 2 cylinders as well.
If you want to stick with thru-transom exhaust get a set of Glenwood logs or something. Or go over transom headers.
-
I meant to post this before the bidding ended in case someone here was interested but I forgot about them.
Anyone seen these square manifolds before? I think they would look pretty good.
(Attachment Link)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320204579721&ssPageName=ADME:B:WNA:MOTORS:1123 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320204579721&ssPageName=ADME:B:WNA:MOTORS:1123)
If you need some I have some that you can have, but you have to take the whole engine.
http://www.socaljetboats.com/index.php?topic=1979.0
-
Edit still does not work, can you fix it Brad ?
Here is a picture;
(https://www.socaljetboats.com/index.php?action=dlattach;topic=1979.0;attach=8597;image)
-
Here is a picture;
(https://www.socaljetboats.com/index.php?action=dlattach;topic=1979.0;attach=8597;image)
Ouch, that's hideous... :P
-
All GMs are that way to me, Hideous !
-
jim is that your race motor
-
Yep the one that ran all 7 heats and won two in Nostalgia Jet !
-
If you need some I have some that you can have, but you have to take the whole engine.
http://www.socaljetboats.com/index.php?topic=1979.0
Thanks Jim; as I said in my PM, if you lived anywhere near here I'd take you up on that offer; may just be enough in that 455 to get me back up and running; oh well.
-
The cool thing is there are some people coming out this way soon for the SCORE race, I am sure someone would have room in there truck to get it back close to you and then maybe someone else can get it even closer and so on.
Just a thought !
-
I'm condisering taking that hidious thing off of your hands Jim, not sure if I have the same offer as Wanabe but... nevertheless. I have a 455 that will be done in about a ? week ? which I am going to sell. Once that 455 is sold I'll know what they're worth when they are sitting on a pallet rebuilt and running.
-
Rod if there is noway for him to get this or nothing works out for him on this one it is all yours.
-
I'm condisering taking that hidious thing off of your hands Jim, not sure if I have the same offer as Wanabe but... nevertheless. I have a 455 that will be done in about a ? week ? which I am going to sell. Once that 455 is sold I'll know what they're worth when they are sitting on a pallet rebuilt and running.
Hold on Rod; let me see what I can work out 1st; I want to get my motor back together and running so I won't be boatless come spring.
-
The cool thing is there are some people coming out this way soon for the SCORE race, I am sure someone would have room in there truck to get it back close to you and then maybe someone else can get it even closer and so on.
Just a thought !
Great thought; I'll be asking around; will let you know what I find out.
Thanks again for the offer.
?COORS HEAVY?: http://www.socaljetboats.com/index.php?topic=2512.msg33856#msg33856
Feel like bringing something back with you?
-
I will have PW-Tony give me a hand getting it pulled.It will be hanging waiting on scheduled transport. Just let me know when ! I have tires and wood to set it on.
-
Its all set up ready to pull tomarrow. Do you have anyone to pick it up yet ? I am not guarantee anything on this except it is a 455 with square manifolds and K heads.
-
The cool thing is there are some people coming out this way soon for the SCORE race, I am sure someone would have room in there truck to get it back close to you and then maybe someone else can get it even closer and so on.
Just a thought !
Is anyone going to help wanabe out ?