SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: 79charger on June 28, 2009, 08:49:10 PM

Title: 460 egr intake??????????
Post by: 79charger on June 28, 2009, 08:49:10 PM

My buddy has a edelbrock performer intake egr style . Can i run this on my jet boat or do i need a n on egr style thanks

Title: Re: 460 egr intake??????????
Post by: Nordie on June 28, 2009, 08:51:29 PM

I don't see why not you just need the block off plate on the intake

Title: Re: 460 egr intake??????????
Post by: GT Jets on June 28, 2009, 10:16:17 PM

You can buy a block off or drill and tap the holes inside the manifold to 3/8" NPT if you don't want to fool with it.

GT

Title: Re: 460 egr intake??????????
Post by: jet boat performance on June 28, 2009, 10:34:05 PM

Blocking off the Automotive type heat cross over is woth some serious HP call if you need help Tom

Title: Re: 460 egr intake??????????
Post by: propless on June 28, 2009, 10:48:26 PM

Yea, what everyone ealce said. 

 But what intake do you have now ??  Helpfull hint, a stock marine 460 intake manifold is better then a performer.  The marine intake was the same casting as a Cobra Jet intake.