SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Beaveretriever on January 03, 2009, 04:26:34 PM

Title: aluminum/s.s scoop for a 750cfm holley
Post by: Beaveretriever on January 03, 2009, 04:26:34 PM

im looking for a scoop for a holley, single set up. im thinking about building one at my brothers shop. can anyone get me a picture of the mounting system that is used for securing the scoop? the more pictures the better, or if someone might have one for a nice cheap price i might just by yours.


Thanks
The Beav

Title: Re: aluminum/s.s scoop for a 750cfm holley
Post by: Ralph Brunt on January 03, 2009, 04:35:39 PM

most use the flame arrester and a wing nut or, you can drill a hole in it and use a stud or, you can build a u shaped bracket that sits inside the scoop. sorry no pics

Title: Re: aluminum/s.s scoop for a 750cfm holley
Post by: jet boat performance on January 03, 2009, 06:19:54 PM

Quote from: Ralph Brunt on January 03, 2009, 04:35:39 PM

most use the flame arrester and a wing nut or, you can drill a hole in it and use a stud or, you can build a u shaped bracket that sits inside the scoop. sorry no pics

That about covers it ! Ralph ,sorrry Beav no pics either but happy to help if ya call Tom

Title: Re: aluminum/s.s scoop for a 750cfm holley
Post by: 76 Bonneville on January 03, 2009, 07:08:32 PM

Brand new stanless one for 100.00 bucks, cost 160.00. Driving from San Diego to downtown LA tomorrow, could drop it off.
I use a piece of 1/4 allthread w/ a nut, a 3 x 8 spark arrestor it's tight, but will fit.

Title: Re: aluminum/s.s scoop for a 750cfm holley
Post by: Beaveretriever on January 03, 2009, 07:19:09 PM

pm sent.................hopefully sold  ;D

The Beav

Title: Re: aluminum/s.s scoop for a 750cfm holley
Post by: 76 Bonneville on January 03, 2009, 07:41:01 PM

I'll be up that way around 11:00 am. I have a Morse forward/ reverse control that i'll bring up if you're interested.

Title: Re: aluminum/s.s scoop for a 750cfm holley
Post by: Beaveretriever on January 03, 2009, 07:48:02 PM

do you have a pic of the control? and what are you looking to get for it?

you are like a one stop shop  ;D

thanks

The Beav

Title: Re: aluminum/s.s scoop for a 750cfm holley
Post by: 76 Bonneville on January 03, 2009, 09:15:32 PM

 How about 30.00 for the shifter?  I'll just bring it tomorrow, if you want it fine, if you dont it'll just go back on the shelf.                       Ron