SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: doug olah on May 10, 2016, 12:06:08 PM

Title: BBC engine removal
Post by: doug olah on May 10, 2016, 12:06:08 PM

Hi New to forum..

  Trying to remove BBC from a Dominator jet pump. How far does the spline engage into the pump, as I only have inches to move forward in a Taylor SJ. Any help is greatly welcomed!

thanks
Doug

Title: Re: BBC engine removal
Post by: mash on it on May 10, 2016, 12:21:05 PM

About 2 inches, some longer, some shorter.

Dan'l

Title: Re: BBC engine removal
Post by: doug olah on May 10, 2016, 12:27:59 PM

Thank you Dan. Look like I might have to remove back seat. Any other tips? Can I unbolt the U joint through the access? Hole on the bell housing? Then unbolt bell housing? My wife just bought this boat and came apart after one run.

thanks again

Title: Re: BBC engine removal
Post by: FordLover on May 10, 2016, 02:37:08 PM

Its a bitch to do but ya you can unbolt the ujoint or the driveline from the pto/fly wheel. If you did that would even have to take the bell housing off?