SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: hbkeith on February 23, 2018, 11:05:34 AM
-
I just bought my first jet boat. I have had several other boats and hot rods and do almost all my own work. My question is what is the easiest / cleanest way to change the oil since the oil pan goes pretty deep into the bilge and access is pretty limited.
-
A lot of jet boat oil pans have a drain hose coming off the drain plug if you have that push it out the Boat drain plug hole and open it up takes a little while I usual leave mine over night
Sent from my iPhone using SoCal Jet Boats
-
Hi,
Yeah I have had other boats with that drain hose. Unfortunately this one doesn't have that so, I was just looking for tips before I make a mess.
Thank you for the reply
-
They sell a pump that sucks out the dip stick tube.its a 5 gal bucket with a pump,or make one
Sent from my XT1635-01 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Harbor Freight sells this vacuum pump. It works perfectly. Worth every penny. You won't spill a drop.
https://m.harborfreight.com/23-gal-manual-fluid-extractor-62643.html
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Thank you, I will look into a pump.