SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: jetjunky101 on May 29, 2012, 02:46:18 PM
-
i just got all my new ignition set up....and i just wanted to ask if 10* b4 TDC is a good place to start....i havent had it on the water yet ..
it seems to be running awsome and advancing like it sould .....but i could be very wrong :screwy:
thanks. :beer:
-
set idle about 12-14... then hit the throttle and at 3k+ rpms it should be "all in" with ~36 degrees of total timing.
-
yha thats what i thought 12-14.... thanks
the motor just sounded better at 10 degrees ...gona put back 2 12-14 then get it on the water and see how it gose :thumbup:
thanks