SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Watts420 on June 29, 2011, 08:12:30 PM

Title: beede tach
Post by: Watts420 on June 29, 2011, 08:12:30 PM

 I have a beede tach with 4 settings on the back. 1 2 3 4. What number should it be on.

Title: Re: beede tach
Post by: Willow Wog on June 29, 2011, 10:11:08 PM

I'm pretty sure its # 2. I just did a set of hardin's and I'm pretty sure there the same as the beedes.

Title: Re: beede tach
Post by: IRRebel on June 29, 2011, 10:32:17 PM

Quote from: Watts420 on June 29, 2011, 08:12:30 PM

I have a beede tach with 4 settings on the back. 1 2 3 4. What number should it be on.

Seems to me I've had this before. If I remember right, they are DIP switches, and on an 8 cylinder engine, leave them all closed except #2. Could be labeled on/off or open /closed..............

Hope this helps

Ray

Title: Re: beede tach
Post by: NORDIC454 on June 30, 2011, 10:25:34 AM

Quote from: IRRebel on June 29, 2011, 10:32:17 PM

Seems to me I've had this before. If I remember right, they are DIP switches, and on an 8 cylinder engine, leave them all closed except #2. Could be labeled on/off or open /closed..............

Hope this helps

Ray

I have all Beede guages in the Nordic, The tach actually has a dial with a slot for a flathead, and is numbered 1 2 3 4

Title: Re: beede tach
Post by: Watts420 on June 30, 2011, 02:40:27 PM

Thanks guy's for the help. It's set up just like how nordic said. You use a little flathead srewdriver to change  each setting. It has 1 2 3 4. Right now it's on the one and the three. Well #1. I'll try #2 see what happens. If not I'll try each setting out. Thanks again for the input guy's

Title: Re: beede tach
Post by: Willow Wog on June 30, 2011, 04:26:44 PM

My boat is a beede tach and it is on the # 2 slot

Title: Re: beede tach
Post by: Watts420 on July 01, 2011, 03:25:16 PM

Thanks willow wog.