SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: stierney11 on February 01, 2014, 07:16:26 PM
-
Took my carb to mike and had it done the next day for me he has been in business for over 40 years now and has the story's to prove it great guy and good at what he does
Sent from my iPhone using SoCalJetBoats mobile app
-
What does he charge per carb if u dont mind me asking? Does he run them on a test motor after rebuilding?
-
thanks for the heads up. ive been meaning to take my demon somewheres for a rebuild. i slapped it on with some new gaskets after buying it from a swapmeet and the base plate has some gunk on it, i think its a super slow fuel leak or something.
-
He charges 350 per carb not including extra parts and yes he does put them on a test engine and he also takes the carbs back to factory color
Sent from my iPhone using SoCalJetBoats mobile app
-
Rick / Izzy in san diego... For a bit less and all parts are re cad plated. Might have to adjust your idle but thats about it. Let him know your build/use. He will do almost any carb. You can ship to him...
619-977-8213 cell
619-971-1598 cell
619-544-8213 pager
Pick of my last build from him.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi897.photobucket.com%2Falbums%2Fac178%2F2ndlight%2F0302030743_zps53752448.jpg&hash=8e6ae2900aa194907b4bb54b3b852b47dc352601)
-
This guy is in Santa Anna
Sent from my iPhone using SoCalJetBoats mobile app
-
These are the two guys i use.
keven @ CUS built my 1150 for a great price( way less that 700) and ran great right out of the box.
http://www.csucarbs.com/index.html (http://www.csucarbs.com/index.html)
Most people i know use john @C&J engineering
http://www.candjengineering.com/ (http://www.candjengineering.com/)
-
He charges 350 per carb not including extra parts and yes he does put them on a test engine and he also takes the carbs back to factory color
Sent from my iPhone using SoCalJetBoats mobile app
350 wtf. i could jsut buy a brand new carb for that price. does he rub whale blood on it or something?
-
350 wtf. i could jsut buy a brand new carb for that price. does he rub whale blood on it or something?
350 is not that bad ... If they really know what they are doing.
I sent my carb in to CSU after a year of running and after a cam change. He asked for numbers of the cam, rockers, Cubic inch, compression, heads, fuel system, and intake. With that rebuild i got 2 and a half pages of MATH. That right there shows me he knows whats up.
I know john at C&J does the same thing
Anybody can change and set floats, clean a carb, change jets ect....... JMO
-
Good contact info
Sent from my DROID RAZR using SoCal Jet Boats mobile app
-
John at C&J did my 750 Holley for $230 for my 5.3l it runs way better than it ever did all the way around. Bolted it on and haven't touched shit.
-
I take mine to performance carb in Ontario. Talk to Ron. He did my 750 dp for 200. Complete rebuild and he sets up the carb for your motor. Breaks in the carb and gives it to you. Bolt on and go
Sent from my iPhone using SoCal Jet Boats