SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: 76NORDIC on August 23, 2011, 07:47:05 PM

Title: Bigtime vacumn leak....
Post by: 76NORDIC on August 23, 2011, 07:47:05 PM
Was putting a new sticker on my splash guard, and happen to look up, and lo and behold on the back of the carb is misssing something. The fricking rubber cap for the tube that is there for the pcv valve, or brake booster on a car is GONE!!!!!!!  No wonder I was having a prob with idle and it not having the power when Brad was doing a few circles with it :banghead: :banghead: :banghead: :banghead:
Title: Re: Bigtime vacumn leak....
Post by: IRRebel on August 23, 2011, 07:53:22 PM
I confess.....I needed a plug for the drain on my cooler.......... >:D

Ray
Title: Re: Bigtime vacumn leak....
Post by: 76NORDIC on August 23, 2011, 07:54:27 PM
Pay back is a bitch Ray   LOL >:D
Title: Re: Bigtime vacumn leak....
Post by: IRRebel on August 23, 2011, 07:56:28 PM
Pay back is a bitch Ray   LOL >:D

Well, I figured ya didn't have reverse anyway, so you wouldn't miss it!!   ;)

Just kidding brutha!

Ray
Title: Re: Bigtime vacumn leak....
Post by: 76NORDIC on August 23, 2011, 08:22:36 PM
Who the hell needs reverse   lol     :sly:
Title: Re: Bigtime vacumn leak....
Post by: ka0tyk on August 23, 2011, 08:43:40 PM
little glue/silicone on the outside of the tube will keep em on better.  not into the cap itself... could get sucked in.
Title: Re: Bigtime vacumn leak....
Post by: 76NORDIC on August 24, 2011, 12:33:27 PM
Ya prolly try a little sillycone on this time ;)
Title: Re: Bigtime vacumn leak....
Post by: enginedoctor on August 24, 2011, 04:02:51 PM
Hose clamp...never sylicone on a carb  :sly:
Title: Re: Bigtime vacumn leak....
Post by: ka0tyk on August 24, 2011, 04:17:10 PM
Hose clamp...never sylicone on a carb  :sly:

hose clamp that small?  a little DAB isnt gonna hurt anything.  obviously dont go crazy with it.  maybe a zip tie but that looks tacky as hell.
SMFPacks CMS 1.0.3 © 2026