SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: IRRebel on May 26, 2011, 03:57:12 PM
-
After 2 years or so searching, FINALLY scored one at a reasonable price and it arrived today! (gotta call Paul and get his drive spud tomorrow)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi673.photobucket.com%2Falbums%2Fvv95%2FIrrebel%2FMoo%2520build%2FNicson001.jpg&hash=f065a1c92fda3097269471c20220a02154cb01f4)
Add that to what Harry found me...........This stuff is better than Levitra!!
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi673.photobucket.com%2Falbums%2Fvv95%2FIrrebel%2FMoo%2520build%2F10-71-3-1.jpg&hash=0c81809ed9fe207aa6ec2b37a23d2535d13bbab3)
Now I just gotta get everything for under it put back together...... :screwy:
Ray
-
Oh that was you, Ray? 8) We have the fuel pump Hex Drives in stock. Also, we've mocked one up behind one of those Nicson front covers and it looked great:
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.hotboatpics.com%2Fpics%2Fdata%2F500%2F5657HexDrive_NicsonCover_01.jpg&hash=c289d56a154d5c071c36f4e1a575492a4bf0362f)
Buzz ya later,
LO
p.s. I just picked up a brand new fully polished Mooneyham blower myself, 8-71.
-
p.s.: I never really checked the diameter of the Nicson's pump pad to see if a fuel pump, such as an Enderle, will seat there and be able to take the new drilled/tapped holes for pump mounting, so be sure to check that out.
On the other hand, if you intend to put a waterpump there, such as a Nicson or Neovane waterpump, then our Hex Drive won't work because it's a 3/8" hex drive specifically for injection pumps like Hillborn, Enderle, Kool, Crower, etc. You'd need the waterpump drive from Rex Marine.
-
p.s.: I never really checked the diameter of the Nicson's pump pad to see if a fuel pump, such as an Enderle, will seat there and be able to take the new drilled/tapped holes for pump mounting, so be sure to check that out.
On the other hand, if you intend to put a waterpump there, such as a Nicson or Neovane waterpump, then our Hex Drive won't work because it's a 3/8" hex drive specifically for injection pumps like Hillborn, Enderle, Kool, Crower, etc. You'd need the waterpump drive from Rex Marine.
yeah, it's getting a Hilborn Pump. The pad has enough meat to redrill for the pump, but going to have to machine the pad a smidge for the register on the pump. :thumbup:
Ray