SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: 93_ultra on October 08, 2013, 04:55:55 PM

Title: Cam bearing install..
Post by: 93_ultra on October 08, 2013, 04:55:55 PM

Does anyone know how to do this? I'm in Elsinore and looking for someone who could come and do it. I don't have the tool to do it.


Sent from my iPhone using SoCalJetBoats

Title: Re: Cam bearing install..
Post by: crewchief22 on October 08, 2013, 05:37:48 PM

Even is you're going to do the build yourself, it's easier to have a machine shop, clean, check and install cam bearings.  It shouldn't cost much.

Title: Re: Cam bearing install..
Post by: berkbryan on October 08, 2013, 05:51:43 PM

Take it to the shop

Sent from my SGH-T999 using SoCalJetBoats mobile app

Title: Re: Cam bearing install..
Post by: JBASHAM on October 08, 2013, 06:02:13 PM

Yeah I agree. Each bearing has to be clocked a certain way for proper oiling, if not done properly u will smoke the cam in no time. Take it to a machine shop.


Sent from my iPhone using SoCalJetBoats

Title: Re: Cam bearing install..
Post by: Jet Boat Maloney on October 08, 2013, 08:05:27 PM

X2 it's not difficult if you have the tools and are familiar with using them. Better off having them do it.


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Cam bearing install..
Post by: 93_ultra on October 08, 2013, 09:16:58 PM

Ok that was my second option, the machine shop.


Sent from my iPhone using SoCalJetBoats